journal article·2007-03

Elastic modulus and in vitro biocompatibility of Ti−xNb and Ti−xTa alloys

Seung Eon Kim, Hi Won Jeong, Yong Taek Hyun, Yong Tai Lee, Chan Hoi Jung, Soon Kook Kim, Jae Sung Song, Jun Hee Lee

Publisher page

Abstract

The effect of niobium and tantalum on the elastic modulus and the in vitro biocompatibility in binary titanium alloys was studied. The Young's modulus of titanium was effectively lowered with additions of Nb or Ta, depending significantly upon the microstructure. Martensitic microstructures such as α' and α" decreased the elastic modulus, while the ω phase increased it. Ti−10%Nb, Ti−30%Nb and Ti−30%Ta alloys exhibited very low elastic moduli of 74, 80, and 58 GPa, respectively. The corrosion resistance of Ti−xTa was slightly higher than that of Ti−xNb, which was comparable to that of CP Ti or Ti−6A−4V. No ion release was detected in Hank's solution, while Ti ions were released in 0.1% lactic acid ranging from 0.03 to 0.11 μg/ml for both the Ti−xNb and Ti−xTa alloys. MG63 osteoblast-like cell proliferation on Ti−30%Ta was less active compared with Ti−30%Nb, CP Ti or Ti−6Al−4V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. R. A. Latour, Jr.,Encyclopedic Handbook of Biomaterials and Bioengineering, Part B, Vol. 1, p. 359, Marcel Dekker NY (1995).
2. D. R. Sumner, T. M. Turner, R. Igloria, R. M. Urban, and J. O. Galante,J. Biomechanics 35, 909 (1998).10.1016/S0021-9290(98)00096-7 ↗
3. M. Long and H. J. Rack,Biomaterials 19, 1621 (1998).10.1016/S0142-9612(97)00146-4 ↗
4. M. Niinomi,Mater. Sci. Eng. A. 243, 231 (1998).10.1016/S0921-5093(97)00806-X ↗
5. T. Ozaki, H. Matsumoto, T. Miyazaki, M. Hasegawa, S. Watanabe, and S. Hanada,Proc. Materials and Processes for Medical Devices Conference, p. 197, St. Paul, USA (2004).
6. M. Niinomi,J. Metals, June, 32 (1999).
7. S. G. Fedotov,Titanium Science and Technology, p. 871, Plenum Press, NY (1973).
8. Y. L. Zhou, M. Niinomi, and T. Akahori,Mater. Sci. Eng. A 371, 283 (2004).10.1016/j.msea.2003.12.011 ↗
9. G. Lutjering and J. C. Williams,Titanium, p. 16, Springer, Germany (2003).10.1007/978-3-540-71398-2 ↗
10. W. F. Ho, C. P. Ju, and J. H. C. Lin,Biomaterials 20, 2115 (1999).10.1016/S0142-9612(99)00114-3 ↗
11. E. W. Collings,Materials Properties Handbook, Titanium Alloys, p. 10, ASM, Materials Park (1994).
12. H. K. Kim and J. W. Jang,Met. Mater.-Int. 10, 439 (2004).10.1007/BF03027346 ↗
13. H. C. Choe, Y. M. Ko, and H. O. Park,Met. Mater.-Int. 12, 365 (2006).10.1007/BF03027555 ↗
14. Y. L. Zhou, M. Niinomi, T. Akahori, H. Fukui, and H. Toda,Mater. Sci. Eng. A 398, 28 (2005).10.1016/j.msea.2005.03.032 ↗