journal article·2014-05

Ring-rolling design of yaw ring for wind turbines

Jong-Taek Yeom, Jeoung Han Kim, Jae-Keun Hong, Jin Mo Lee, Kook Joo Kim, Tae Ok Kim, Nam Yong Kim, Hi Sang Chang

Publisher page

Abstract

In this work, a ring-rolling process to formulate ring-shaped components for a wind turbine is designed by means of a simulation and in an experimental approach. The target of the ring-rolling design is a yaw ring with an outer diameter of approximately 3,130 mm. The ring-rolling design includes the design of the geometry and the optimization of the process variables. A calculation method was used for the geometry design, in this case for the initial billet and the pre-form (or blank) sizes, and for the final rolled ring shape. Also, a deformation map-based approach was utilized to determine the initial ring-rolling temperature and feed rate of the mandrel. A three-dimensional finite element method was used to predict the formation of rolling defects and the deformed shape in the ring-rolled components. The design criteria are to achieve uniform distributions of the strains and temperatures as well as defect-free ring-shaped components. Finally, an optimum process design to obtain a sound large-scale yaw ring without defects is proposed. It is validated by comparisons between the experimental data and the FE analysis results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. E. Eruc and R. Shivpuri, Int. J. Mech. Tools Manufact. 32, 379 (1992).10.1016/0890-6955(92)90009-6 ↗
2. S. L. Semiatin, ASM Handbook: Vol. 14A Metalworking: Bulk Forming, pp.136–155, ASM International Materials Park (2005).10.31399/asm.hb.v14a.a0003982 ↗
3. W. Wang, T. Lee, and M. A. Reed, Phys. Rev. B 68, 035416 (2003).10.1103/PhysRevB.68.035416 ↗
4. R. Shivpuri and E. Eruc, Int. J. Mach. Tools Manufact. 33, 153 (1993).10.1016/0890-6955(93)90071-2 ↗
5. J. T. Yeom, J. H. Kim, N. K. Park, S. S. Choi, and C. S. Lee, J. Mater. Process. Tech. 187, 747 (2007).10.1016/j.jmatprotec.2006.11.042 ↗
6. B. S. Kang and S. Kobayashi, Int. J. Mach. Tools Manufact. 31, 139 (1991).10.1016/0890-6955(91)90057-A ↗
7. I. C. Yoo, J. J. Park, and S. J. Choe, J. Korean Inst. of Met & Mater. 34, 973 (1996).
8. Y. V. R. K. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark, and D. R. Barker, Metall. Trans. A, 15A, 1883 (1984).10.1007/BF02664902 ↗
9. N. Srinivasan and Y. V. R. K. Prasad, Metal. Trans. A, 25A, 2275 (1994).10.1007/BF02652327 ↗
10. M. C. Somani, M. C. Somani, K. Muraleedharan, Y. V. R. K. Prasad, and V. Singh, Mater. Sci. Eng. A 245, 88 (1998).10.1016/S0921-5093(97)00698-9 ↗
11. B. C. Ko and Y. C. Yoo, Met. Mater. Int. 5, 555 (1999).10.1007/BF03026304 ↗
12. J. T. Yeom, E. J. Jung, J. H. Kim, D. G. Lee, N. K. Park, S. S. Choi, and C. S. Lee, Key Eng. Mat. 345, 1557 (2007).10.4028/www.scientific.net/KEM.345-346.1557 ↗
13. J. C. Malas and V. Seetharaman, JOM 6, 8 (1992).10.1007/BF03222246 ↗
14. H. Ziegler, Progress in Solid Mechanics, pp.93–193, John Willey and Sons, New York (1963).
15. S. H. Park, H. Yu, H. S. Kim, J. H. Bae, C. D. Yim, and B. S. You, Korean J. Met. Mater. 51, 169 (2013).10.3365/KJMM.2013.51.3.169 ↗
16. Y. V. R. K. Prasad and S. Sasidhara, Hot Working Guide: A Compendium of Processing Maps, pp.262–342, ASM International Materials Park (1997).