journal article·2019-06-15

Precipitation Mechanism and Reduction of Amount of Primary Carbides During Electroslag Remelting of 8Cr13MoV Stainless Steel

Qin-Tian Zhu, Jing Li, Jie Zhang, Cheng-Bin Shi, Ji-Hui Li, Jun Huang

Publisher page

Abstract

The precipitation and growth of primary carbides in 8Cr13MoV steel during electroslag remelting (ESR) were studied. The effects of melting rate and fill ratio of ESR on the reduction of primary carbides were clarified. Primary carbides M7C3 precipitated from liquid steel at the final stage of solidification, which is attributed to an enrichment of carbon and chromium in liquid steel. The carbon content in the residual liquid steel was the determining factor for the formation of primary carbides. The growth of primary carbides was affected mainly by the chromium-concentration and temperature-field gradients. An appropriate melting rate facilitated the nucleation and growth of dendrites, which caused dendrite closure and prevented the further enrichment of carbon atoms. Primary carbides were refined and their amount was reduced when using a lower ESR melting rate. The fill ratio can affect the uniformity of the temperature field in the liquid metal pool and heat transfer from the slag pool to the liquid metal pool, and an optimal fill ratio resulted in a minimum mushy zone and less primary carbides. The volume fraction of primary carbides was reduced by 23 pct when the melting rate decreased from 150 to 133 kg/h and the fill ratio increased from 0.23 to 0.33.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. K. C. Hwang and S. Lee, H. C. Lee: Mater. Sci. Eng. A, 1998, vol. 254, pp. 296-304.10.1016/S0921-5093(98)00694-7 ↗
2. C.A.C. Imbert and H.J. McQueen: Can. Metall. Quart., 2013, vol. 40, pp. 235-44.10.1179/000844301794388461 ↗
3. C.B. Shi, Q.T. Zhu, W.T. Yu, H.D. Song and J. Li: J. Mater. Eng. Perform., 2016, vol. 25, pp. 4785-95.10.1007/s11665-016-2361-4 ↗
4. Q.T. Zhu, J. Li, C.B. Shi, W.T. Yu and J.H. Li: Int. J. Mater. Res., 2017, vol. 108, pp. 20-8.10.3139/146.111447 ↗
5. Q. Liu, H. Zhang, Q. Wang, X. Zhou, P.G. Jonsson and K. Nakajima: ISIJ Int., 2012, vol. 12, pp. 2210-19.10.2355/isijinternational.52.2210 ↗
6. W.T. Yu, J. Li, C. B. Shi and Q.T. Zhu: Metals, 2016, vol. 8, pp. 193-208.10.3390/met6080193 ↗
7. X.J. Wu, J.D. Xing, H.G. Fu and X.H. Zhi: Mater. Sci. Eng. A, 2007, vol. 457, pp. 180-85.10.1016/j.msea.2006.12.006 ↗
8. K.S. Cho, S.I. Kim, S.S. Park, W.S. Choi, H.K. Moon and H. Kwon: Metall. Mater. Trans. A, 2015, vol. 47A, pp. 26-32.
9. I. V. Doronin, Y. A. Lukina, I. O. Bannykh and P.L. Alekseev: Russ. Metall., 2011, vol. 1, pp. 29-32.10.1134/S0036029511010071 ↗
10. G. Lvov, V. I. Levit and M. J. Kaufman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1669-79.10.1007/s11661-004-0076-x ↗
11. W. H. Jiang, X. D. Yao, H. R. Guan and Z.Q. Hu: J. Mater. Sci., 1999, vol. 12, pp. 2859-64.10.1023/A:1004683301816 ↗
12. E. Lee, W. Park, J. Y. Jung and S. Ahn: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1395-1404.10.1007/s11661-998-0354-0 ↗
13. F.S. Pan, W.Q. Wang, A.T. Tang, L.Z. Wu and T.T. Liu: Prog. Nat. Sci., 2011, vol. 2, pp. 180-86.10.1016/S1002-0071(12)60053-7 ↗
14. Z.B. Li: Electroslag Metallurgy Theory and Practice, Metallurgical Industry Press, Beijing, China, 2011, pp. 66.
15. A. Mitchell and B. Hernandez-morales: Metall. Trans. B, 1990, vol. 21B, pp. 723-31.10.1007/BF02654251 ↗
16. K. Fezi, J. Yanke and M. J. M.Krane: Metal. Mater. Trans. B, 2015, vol. 46B, pp. 766-79.10.1007/s11663-014-0254-1 ↗
17. Y. F. Qi, J. Li, C.B. Shi, Y. Zhang, Q.T. Zhu and H. Wang: J. Mater. Process. Technol., 2017, vol. 249, pp. 32-38.10.1016/j.jmatprotec.2017.05.034 ↗
18. X. Chen, Z. Jiang, F. Liu, J. Yu and K. Chen: Steel. Res. Int., 2017,vol. 88, pp. 186-95.
19. W.T. Yu, J. Li, C.B. Shi and Q.T. Zhu: Mater. Trans., 2016, vol. 57, pp. 1547-51.10.2320/matertrans.M2016018 ↗
20. V. Weber, A. Jardy, B. Dussoubs, D. Ablitzer, S. Ryberon, V. Schmitt, S. Hans and H. Poisson: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 271-80.10.1007/s11663-008-9208-9 ↗
21. S. D. Ridder, F. C. Reyes, S. Chakravorty, R. Mehrabian, J.D. Nauman, J.H. Chen and H.J. Klein: Metall. Trans. B, 1978, vol. 9B, pp. 415-25.10.1007/BF02654416 ↗
22. Q. Wang and B.K. Li: Appl. Therm. Eng., 2015, vol. 91, pp. 116-25.10.1016/j.applthermaleng.2015.08.013 ↗
23. K.M. Kelkar, S.V. Patankar, S.K. Srivatsa, R.S. Minisandram, D.G. Evans, J.J. DeBarbadillo, R.H. Smith, R.C. Helmink, A. Mitchell, and H.A. Sizek: Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting, 2013, pp. 3–12.10.1007/978-3-319-48102-9_1 ↗
24. A. Mitchell and S. Joshi: Metall. Trans., 1972, vol.3, pp. 2306-07.10.1007/BF02643253 ↗
25. Y.W. Dong, Z.H. Jiang, H. Liu, R. Chen and Z.W. Song: ISIJ Int., 2012, vol. 52, pp. 2226-34.10.2355/isijinternational.52.2226 ↗
26. K.C. Mills and B.J.Keene: Int. Mater. Rev., 1981, vol.1, pp. 21-26.10.1179/095066081790149212 ↗
27. E. Karimi-sibaki, A. Kharicha, J. Bohacek, M. Wu and A. Ludwig: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 2049-61.10.1007/s11663-015-0384-0 ↗
28. W.X. Song: Metallography, Metallurgical Industry Press, Beijing, China, 2011, pp. 326.
29. N. Barnes, S. Clark, S. Seetharamah and P.F. Mendez: Acta. Mater., 2018, vol 151, pp. 356-65.10.1016/j.actamat.2018.03.050 ↗
30. J.T.H. Pearce: J. Mater. Sci. Lett., 1983, vol. 2, pp. 428-32.10.1007/BF00723685 ↗
31. S. Liu, Y.F. Zhou, X.L. Xing, J.B. Wang, Y.L. Yang and Q.X. Yang: Mater. Lett., 2016, vol. 183, pp. 272-76.10.1016/j.matlet.2016.07.135 ↗
32. G.L.F. Powell and R.A. Carlson: J. Mater. Sci., 1994, vol. 29, pp. 4889-96.10.1007/BF00356539 ↗
33. S.A. David and H.D. Brody: Metall. Trans., 1974, vol. 5, pp. 2309-16.10.1007/BF02644011 ↗
34. Z.H. Jiang, Y.W. Dong, X. Geng and F.B. Liu: Electroslag Metallurgy, Science Press, Beijing, China, 2015, pp. 243.
35. F.L. Li, R. Fu, D. Feng, F.J. Yin and Z.L. Tian: Rare. Metal. Mat. Eng., 2016, vol. 45, pp. 1437-42.10.1016/S1875-5372(16)30127-8 ↗
36. X.H. Wang and Y. Li: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 800-12.10.1007/s11663-014-0227-4 ↗
37. A. Mitchell: Perspective in Metallurgical Development Conference, Sheffield, England, 1984, pp. 89–98.
38. C.B. Shi, D.L. Zheng, S.H. Shin, J. Li and J.W. Cho: Int. J. Min. Met. Mater., 2017, vol. 24, pp. 18-24.10.1007/s12613-017-1374-9 ↗
39. A. Mitchell: Electric Furnace Steelmaking Conference, Warrendale, PA, 1985, p. 212.