The contact angle between liquid iron and a single crystal, alumina substrate at 1873 K: Effects of oxygen and droplet size
Source abstract
Abstract
The contact angle for iron on a single-crystal alumina substrate varied from 40 to 120 deg by changing the gas atmosphere and droplet size. At constant droplet size, the contact angle was a strong function of the partial pressure of oxygen and increased as oxygen partial pressure decreased. However, at oxygen partial pressures less than 10−18 atm, the contact angle markedly decreased as a zone of reactive wetting was reached due to interaction between alumina and the droplet. The effect of droplet size on the contact angle between liquid iron and a single-crystal alumina substrate was measured at constant oxygen activity and temperature. In an argon-hydrogen atmosphere where oxygen activity was constant, the contact angle increased with increasing droplet size and varied from 40 to 80 deg as the droplet radius increased from 1.5 to 4 mm. A similar though smaller effect was measured in CO atmospheres that were in equilibrium with carbon. In this case, the contact angle ranged from 105 to 118 deg as droplet size increased. Experiments in CO/CO2 atmospheres showed little effect of droplet size at oxygen partial pressures less than 5×10−12 atm, but indicated a significant effect at oxygen partial pressures greater than 10−11 atm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. A. Kasama, A. McLean, W. Amiller, Z. Morita, and M.J. Ward: Can. Met. Q., 1983, vol. 22, p. 9.10.1179/cmq.1983.22.1.9 ↗
2. I. Jimbo and A.W. Cramb: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 26–35.10.2355/isijinternational.32.26 ↗
3. A.W. Cramb and I. Jimbo: Steel Res., 1989, vol. 60, pp. 157–65.10.1002/srin.198900893 ↗
4. N. Takiuchi, T. Taniguchi, Y. Tanaka, N. Shinozaki, and K. Mukai: J. Jpn. Inst. Met., 1991, vol. 55, pp. 180–85.10.2320/jinstmet1952.55.2_180 ↗
5. K. Ogino, K, Nogi, and Y. Koshida: Tetsu-to-Hagané, 1973, vol. 59, pp. 1380–8710.2355/tetsutohagane1955.59.10_1380 ↗
6. K. Nakashima, K. Takihira, K. Mori, and N. Shinozaki: J. Jpn. Inst. Met., 1991, vol. 55, pp. 1199–1206.10.2320/jinstmet1952.55.11_1199 ↗
7. K. Nogi and K. Ogino: Can. Metall. Q., 1983, vol. 22, pp. 19–28.10.1179/cmq.1983.22.1.19 ↗
8. N. Takiuchi, T. Taniguchi, N. Shinozaki, and K. Mukai: J. Jpn. Inst. Met., 1991, vol. 55, pp. 44–4910.2320/jinstmet1952.55.1_44 ↗
9. Wettability at High Temperatures, N. Eustatopoulos, M.G. Nicholas, and B. Drevet, eds., Pergamon Press, Elmsford, NJ, 1999.
10. K. Nogi: Tetsu-to-Hagane, 1998, vol. 84, pp. 1–6.10.2355/tetsutohagane1955.84.1_1 ↗
11. S. Ueda, H. Shi, and A.W. Cramb: M. Wolf Symp., Apr., 2003, ISSTech, pp. 665–79.
12. J. Willard Gibbs: Collected Works, Vol. 1, Thermodynamics, Longmans-Green New York, NY, 1928.
13. D. Kashchiev: Nucleation, Butterworth Heinemann, London, 2000, Ch. 19.
14. Steelmaking Data Source-Book, JSPS 19th Committee, Gordon and Breach Science Publishers, New York, NY, 1988.