Effects of Nickel on the Oxide/Metal Interface Morphology and Oxidation Rate During High-Temperature Oxidation of Fe–Cu–Ni Alloys
Source abstract
Abstract
Steel produced in an electric arc furnace (EAF) contains a high amount of Cu that causes a surface-cracking phenomenon called surface hot shortness. Ni reduces the risk for surface hot shortness, and this work focuses on investigating the following two phenomena caused by Ni during oxidation at 1150 °C for Fe–Cu–Ni alloys: (1) the decrease in oxidation rate and (2) the formation of a wavy liquid-Cu/oxide and of liquid-Cu/γ-iron (γFe) interfaces, which promote Cu occlusion into the scale. Thermogravimetry, scanning electron microscopy, and transmission electron microscopy-energy dispersive spectroscopy techniques were applied. A numerical model also was developed to explain the experimental results. High Ni contents cause higher liquid-Cu/γFe interface nickel concentrations and more potential for an interface breakdown. The decrease in oxidation rate by adding nickel can be explained qualitatively by the decrease in Fe cation transport through the wustite layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. U.S. Geological Survey: Mineral Commodity Studies 2008, p. 86, Department of Interior, Washington, DC, 2008
2. Energetics Inc.: Energy and Environmental Profile of the U.S. Iron and Steel Industry, p. 10–26, U.S. Department of Energy, Office of Industrial Technologies, Washington, DC, 2000.
3. A. Nicholson and J.D. Murray: J. Iron Steel Inst., 1965, vol. 203, pp. 1007-18.
4. D.A. Melford: Philos. Trans. R. Soc. Lond., 1980, vol. 295, no.1413, pp. 89-103.10.1098/rsta.1980.0078 ↗
5. J.K.S. Tee and D.J. Fray: Ironmaking Steelmaking, 2006, vol. 33, no. 1, pp. 19-23.10.1179/174328106X80028 ↗
6. D.A. Melford: J. Iron Steel Inst., 1962, vol. 200, pp. 290-99.
7. W.J.M. Salter: J. Iron Steel Inst., 1966, vol. 204, pp. 478-88.
8. B.A. Webler, L. Yin, and S. Seetharaman: Metall. Mater. Trans. B, 2008, vol. 39, no. 5, pp. 725-37.10.1007/s11663-008-9196-9 ↗
9. G.L. Fisher: J. Iron Steel Inst., 1969, vol. 207, pp. 1010-16.
10. T. Fukagawa and H. Fujikawa: Oxid. Met., 1999, vol. 52, nos. 3–4, pp. 177-94.10.1023/A:1018883326123 ↗
11. R.Y. Chen and W.Y.D. Yuen: ISIJ Int., 2005, vol. 45, no. 6, pp. 807-16.10.2355/isijinternational.45.807 ↗
12. S. Akamatsu, T. Senuma, Y. Takada, and M. Hasebe: Mater. Sci. Technol., 1999, vol. 15, no. 11, pp. 1301-07.10.1179/026708399101505257 ↗
13. D.E. Coates and J.S. Kirkaldy: J. Cryst. Growth, 1968, vol. 3, no. 4, pp. 549-54.10.1016/0022-0248(68)90222-4 ↗
14. Materials Preparation Center: Ames Laboratory, US DOE Basic Energy Sciences, www.mpc.ameslab.gov.
15. K. Sachs and C.W. Tuck: Proc. Conf. Reheating for Hot Working, Iron and Steel Institute, 1968, pp. 1–17.
16. H. Abuluwefa, R.I.L. Guthrie, and F. Ajersch: Oxid. Met., 1996, vol. 46, no. 5–6, pp. 423-40.10.1007/BF01048639 ↗
17. W.S. Rasband: ImageJ, U.S. National Institutes of Health, http://rsb.info.nih.gov/ij/, 1997.
18. Thermo-Calc Software AB: Version Q on WinNT and the TCFe3 Database, Stockholm, Sweden, 2004.
19. S. Pötschke and A.R. Buchner: Steel Res. Int., 2006, vol. 77, no. 6, pp. 416-22.10.1002/srin.200606408 ↗
20. M.M.G. Alemany, L.J. Gallego, L.E. González, and D.J. González: J. Chem. Phys., 2000, vol. 113, no. 22, p. 10410-11.10.1063/1.1322626 ↗
21. W.K. Chen and N.L. Peterson: J. Phys. Chem. Solids, 1975, vol. 36, no. 10, pp. 1097-103.10.1016/0022-3697(75)90052-9 ↗
22. C.J. Smithells: Smithells Metals Reference Book, 8th ed., W.F. Gale and T.C. Totemeier, eds., Elsevier, New York, 2004, pp. 13-12–13-22.
23. Y. Kondo: ISIJ Int., 2004, vol. 44, no. 9, pp. 1576-80.10.2355/isijinternational.44.1576 ↗
24. B.A. Webler and S. Sridhar: ISIJ Int., 2008, vol. 48, no. 10, pp. 1345-53.10.2355/isijinternational.48.1345 ↗
25. COMSOL AB: FEMLAB Version 3.2, Reference manual, 2005.
26. MATLAB: MATLAB 7.0.4 Release 14. The Mathworks Inc., Natick, MA, 2005.
27. J.B. Clark and F.N. Rhines: Trans. ASM, 1959, vol. 51, pp. 199-221.
28. J.S. Kirkaldy and L.C. Brown: Can. Metall. Q., 1963, vol. 2, no. 1, pp. 89-115.10.1179/cmq.1963.2.1.89 ↗
29. L.E. Wirtz and M.A. Dayananda: Metall. Trans. A, 1977, vol. 8A, pp. 567-75.10.1007/BF02676977 ↗
30. C. Wagner: J. Electrochem. Soc., 1956, vol. 103, no. 10, pp. 571-80.10.1149/1.2430159 ↗
31. D.P. Whittle, D.J. Young, and W.W. Smeltzer: J. Electrochem. Soc., 1976, vol. 123, no. 7, pp. 1073-79.10.1149/1.2132998 ↗
32. A.D. Dalvi and D.E. Coates: Oxid. Met., 1972, vol. 5, no. 2. pp. 113-35.10.1007/BF00610840 ↗
33. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, no. 2, pp. 444-51.10.1063/1.1713333 ↗
34. R.F. Sekerka: J. Appl. Phys., 1965, vol. 36, no. 1, pp. 264-67.10.1063/1.1713887 ↗
35. J.S. Kirkaldy and D.G. Fedak: Trans. Metall. Soc. AIME, 1962, vol. 224, no. 3, pp. 490-94.
36. D.E. Coates and J.S. Kirkaldy: Trans. ASM Q., 1969, vol. 62, no. 2, pp. 426-36.
37. J. Brillo and I. Egry: J. Mater. Sci., 2005, vol. 40, nos. 9–10, p. 2213-16.10.1007/s10853-005-1935-6 ↗
38. J. Brillo, I. Egry, and T. Matsushita: Int. J. Thermophys., 2006, vol. 27, no. 6, pp. 1778-91.10.1007/s10765-006-0121-7 ↗
39. R.Y. Chen and W.Y.D. Yuen: Oxid. Met., 2003, vol. 59, nos. 5–6, pp. 433-68.10.1023/A:1023685905159 ↗
40. L. Himmel, R.F. Mehl, and C.E. Birchenall: J. Met., 1953, vol. 5, no. 6, pp. 827-43.
41. H. Bakker, H.P. Bonzel, C.M. Bruff, M.A. Dayananda, W. Gust, J. Horvath, I. Kaur, G.V. Kidson, A.D. LeClaire, H. Mehrer, G.E. Murch, G. Neumann, N. Stolica, and N.A. Stolwijk: Diffusion in Solid Metals and Alloys, Springer-Verlag, Berlin, Germany, 1990.
42. Y. Hanatate, K. Majima, and H. Mitani, Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 669-73.10.2320/matertrans1960.19.669 ↗
43. N. Birks, G.H. Meier, and F.S. Pettit: High-Temperature Oxidation of Metals, 2nd ed., pp. 49–62, 75–78, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9781139163903 ↗
44. J. Païassi: Acta Metall., 1958, vol. 6, no. 3, pp. 184-94.10.1016/0001-6160(58)90006-3 ↗
45. R.T. Foley: J. Electrochem. Soc., 1962, vol. 109, no. 12, pp. 1202-06.10.1149/1.2425276 ↗
46. G.J. Yurek, J.P. Hirth, and R.A. Rapp: Oxid. Met., 1974, vol. 8, no. 5, pp. 265-81.10.1007/BF00609944 ↗
47. G. Garnaud and R.A. Rapp: Oxid. Met., 1977, vol. 11, no. 4, pp. 193-98.10.1007/BF00606543 ↗
48. J. Myers and H.P. Eugster: Contrib. Mineral. Petrol., 1983, vol. 82, no. 1, pp. 75-90.10.1007/BF00371177 ↗
49. B. Swaroop and J.B. Wagner: Trans. Metall. Soc. AIME, 1967, vol. 239, no. 8, pp. 1215-18.
50. D.R. Gaskell: Introduction to the Thermodynamics of Materials, 4th ed. p. 582, Taloy & Francis, Oxford, UK, 2003.
51. U. Choudary, J. Serkin, and G. Belton: Metall. Trans. B, 1975, vol. 6, no. 3, pp. 399-403.10.1007/BF02913824 ↗
52. L. Timberg, J.M. Toguri, and T. Azakami: Metall. Trans. B, 1981, vol. 12, no. 2, pp. 275-79.10.1007/BF02654460 ↗
53. J.P. Morris and G.R. Zellars: Trans. AIME, 1956, vol. 206, no. 8, pp. 1086-90.
54. N. Imai, N. Komatsubara, and K. Kunishige: ISIJ Int., 1997, vol. 37, no. 3, pp. 224-31.10.2355/isijinternational.37.224 ↗