journal article·2023-12Open access

Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

Nathalie Gruber

Abstract

Abstract In the continuous casting of ultra-low carbon steels, recarburization from the mold powder negatively affects steel quality. Therefore, to develop mold powders without free carbon, different carbides or nitrides have been proposed and evaluated in laboratory and field studies. Among these, SiC and Si3N4 were selected for the present study. Additionally, thermodynamic calculations were performed to quantitatively describe their effect on the melting behavior of the mold powder. To verify the results under high heating rates, mixtures of raw material components were placed in a steel crucible with a lid, inserted into a furnace preheated to different temperatures, and investigated mineralogically. The results agreed with those of the thermodynamic calculations. Moreover, the results suggested that Si3N4 and SiC were suitable raw material components and alternatives to carbon in the mold powder. They prevented solid–solid reactions between raw material components to form new phases and were still found at the temperature of 1200 °C. Consequently, the CaO/SiO2 ratio was higher before oxidation and affected the liquid-phase formation. The addition of antioxidants reduced the liquefaction-controlling effect of SiC. Additionally, the study shows that the sample preparation impacts the phase formation: granules facilitate phase formation due to a higher contact of reactants, further they show earlier melting close to their surface as sodium content is increased there by the spray drying procedure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. K.C. Mills, A.B. Fox, R.P. Thackray, and Z. Li: in Proc. of VII Int. Conf. on Molten Slags, Fluxes & Salts. M. Sanchez, ed., The South African Institute of Mining and Metallurgy, Johannesburg, 2004, pp. 713–22.
2. K. C. Mills: NPLRep. DMM(A), ECSC Contract No. 7210.22/451, Report EUR 13177 EN, Teddington, U.K., 1990.
3. M. Kawamoto, K. Nakajima, T. Kanazawa, and K. Nakai: ISIJ Int., 1994, vol. 34, pp. 593–98.10.2355/isijinternational.34.593 ↗
4. N. Kölbl, I. Marschall, and H. Harmuth: in Proc. of VIII Int. Conf. on Molten Slags, Fluxes & Salts. M. Sanchez, ed., Santiago, Chile, 2009, pp. 1031–40.
5. J. A. Kromhout: Mould powders for high speed continuous casting of steel, PhD Thesis, Technical University Delft, Delft, 2013. http://resolver.tudelft.nl/uuid:4b52997d-9fc9-41b3-a4e8-70ffab1b3fdf.
6. M. Supradist, A.W. Cramb, and K. Schwerdtfeger: ISIJ Int., 2004, vol. 44, pp. 817–26.10.2355/isijinternational.44.817 ↗
7. W. Yan, Y.D. Yang, W.Q. Chen, M. Barati, and A. McLean: Can. Metall. Q., 2015, vol. 54, pp. 467–76.10.1179/1879139515Y.0000000034 ↗
8. Z.M. Yi, J.L. Song, and Q.C. Peng: Adv. Mater. Res., 2013, vol. 739, pp. 214–17.10.4028/www.scientific.net/AMR.739.214 ↗
9. S. Terada, S. Kaneko, T. Ishikawa, and Y. Yoshida: Iron Steelmak., 1991, vol. 18, pp. 41–44.
10. F. Han, G. Wen, P. Tang, and F. Chen: Metall. Mater. Trans. B, 2023. Unpublished research.
11. H. Nakato, S. Takeuchi, T. Fujii, T. Nozaki, and M. Washio: in 75th Steelmak. Conf. Proc., Washington DC, USA, 1991, pp. 639–46.
12. H. Takeuchi, H. Mori, T. Nishida, T. Yanai, and K. Mukunashi: Tetsu-to-Hagané, 1978, vol. 64, pp. 1548–57.10.2355/tetsutohagane1955.64.10_1548 ↗
13. H. Takeuchi, T. Nishida, T. Ohno, N. Kataoko, and Y. Hikara: Deutsches Patent (26 26 354), 1976, München, Deutschland: Deutsches Patentamt.
14. B. Debiesme, J. P. Radot, D. Coulombet, C. Lefebvre, J. N. Pontoire, Y. Roux, and C. Damerval: United States Patent (5,876,482), 1996, Washington D.C.: U.S. Patent and Trademark Office.
15. B. Debiesme, J. P. Radot, D. Coulombet, C. Lefebvre, J. N. Pontoire, Y. Roux, and C. Damerval: United States Patent (6,328,781), 1998, Washington D.C.: U.S. Patent and Trademark Office.
16. C. Lefebvre, J.P. Radot, J.N. Pontoir, and Y. Roux: La Revue de Métallurgie-CIT, 1996, pp. 489–96.
17. L. Sun, C. Liu, J. Fang, J. Zhang, and C. Lu: J. Eur. Ceram. Soc., 2019, vol. 39, pp. 1532–39.10.1016/j.jeurceramsoc.2018.12.002 ↗
18. J.J. Macho, G. Hecko, B. Golinmowski, and M. Frazee: in Preprints 33rd McMaster Symp. on Iron and Steelmaking. McMaster Univ., Hamilton, 2005, pp. 131–46.
19. J. Safarian and M. Tangstad: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 920–28.10.1007/s11663-009-9292-5 ↗
20. J. Park, J. Jeon, K. Lee, J.H. Park, and Y. Chung: Metall. Mater. Trans. B, 2016, vol. 47B, pp. 1832–38.10.1007/s11663-016-0606-0 ↗
21. O. Maillart, V. Chaumat, and F. Hodaj: J. Mater. Sci., 2010, vol. 45, pp. 2126–32.10.1007/s10853-009-3950-5 ↗
22. L. Ning and Ch. Jinghao: J. Shaoguan Univ., 1998, vol. 19, pp. 112–20.
23. Taikabutsu Gijutsu Kyōkai (Japan): Refractories Handbook, The Technical Association of Refractories, Japan, 1998.
24. T. Wang and A. Yamaguchi: J. Am. Ceram. Soc., 2001, vol. 84, pp. 577–82.10.1111/j.1151-2916.2001.tb00701.x ↗
25. N.K. Ghosh, K.P. Jagannathan, and D.N. Ghosh: Interceram, 2001, vol. 50, pp. 196–202.
26. F. Han, L. Yu, G. Wen, X. Wang, F. Zhang, J. Jia, and S. Gu: J. Mater. Res. Technol., 2022, vol. 20, pp. 448–58.10.1016/j.jmrt.2022.07.111 ↗