Large-Scale Test Facility for Modeling Bubble Behavior and Liquid Metal Two-Phase Flows in a Steel Ladle
Source abstract
Abstract
Abstract A new experimental facility has been designed and constructed which represents a 1:5.25 model of an industrial 185 t steel ladle. This setup is intended for systematic investigations of complex liquid metal multiphase flows created by gas blowing from the bottom. Two tons of a Sn-40 wt pct Bi alloy are employed as working fluid, its thermophysical properties are very similar to those of liquid steel. The relatively low operating temperatures (T~ 200 °C) compared to the real industrial process allow the use of powerful measuring techniques for characterizing the behavior of the gas phase and resulting flow regimes. Argon gas is injected through diverse plug systems into a cylindrical fluid vessel which is equipped with a pressure tight lid to achieve low-pressure conditions for vacuum processing. This paper presents first measurements of the gas distribution close to the free liquid metal surface for various gas flow rates, plug positions and types. Moreover, the pressure in the vessel has been varied between 1 mbar and ambient pressure. The experiments provide a copious data base about flow regimes, void fraction, liquid and bubble velocities, and bubble properties, which can be used to provide so far unknown boundary conditions for numerical simulations of various metallurgical reactors such as steelmaking converters or steelmaking ladles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Fluid Dynamics and Mixing · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Y. Liu, M. Ersson, H. Liu, P.G. Jönsson, and Y. Gan: Metall. Mater. Trans. B., 2019, vol. 50B, pp. 555–77.10.1007/s11663-018-1446-x ↗
2. D. Mazumdar and R.I.L. Guthrie: ISIJ Int., 1995, vol. 35, pp. 1–20.10.2355/isijinternational.35.1 ↗
3. S.T. Johansen, D.G.C. Robertson, K. Woje and T.A. Enghii: Metall. Trans. B, 1988, vol. 19B, pp. 745–54 and pp. 755–64.10.1007/BF02650194 ↗
4. D. Mazumdar and R.I.L. Guthrie: Metall. Trans. B., 1986, vol. 17B, pp. 725–33.10.1007/BF02657134 ↗
5. S. Kim and R.J. Fruehan: Metall. Trans. B., 1987, vol. 18B, pp. 381–90.10.1007/BF02656157 ↗
6. Y.Y. Sheng and G.A. Irons: Metall. Trans. B., 1992, vol. 23B, pp. 779–88.10.1007/BF02656456 ↗
7. M. Iguchi, S. Hosohara, T. Kondoh, Y. Itoh, and Z. Morita: ISIJ Int., 1994, vol. 34, pp. 330–37.10.2355/isijinternational.34.330 ↗
8. Y.Y. Sheng and G.A. Irons: Metall. Mater. Trans. B., 1995, vol. 26B, pp. 625–34.10.1007/BF02653883 ↗
9. M. Iguchi, R. Tsujino, K. Nakamura, and M. Sano: Metall. Mater. Trans. B., 1999, vol. 30B, pp. 631–37.10.1007/s11663-999-0024-7 ↗
10. Y. Kishimoto, Y. Sheng, G.A. Irons, and J. Chang: ISIJ Int., 1999, vol. 39, pp. 113–22.10.2355/isijinternational.39.113 ↗
11. M. Iguchi and N. Kasai: Metall. Mater. Trans. B., 2000, vol. 31B, pp. 453–60.10.1007/s11663-000-0151-7 ↗
12. K. Krishnapisharody and G.A. Irons: Metall. Mater. Trans. B., 2013, vol. 44B, pp. 1486–98.10.1007/s11663-013-9943-4 ↗
13. J.-P. Bellot, V. De Felice, B. Dussoubs, A. Jardy, and S. Hans: Metall. Mater. Trans. B., 2014, vol. 49B, pp. 13–21.10.1007/s11663-013-9940-7 ↗
14. W. Liu, H. Tang, S. Yang, M. Wang, J. Li, Q. Liu, and J. Liu: Metall. Mater. Trans. B., 2018, vol. 45B, pp. 2681–91.10.1007/s11663-018-1308-6 ↗
15. A.N. Conejo, R. Mishra, and D. Mazumdar: Metall. Mater. Trans. B., 2019, vol. 50B, pp. 1490–1502.10.1007/s11663-019-01546-8 ↗
16. H. Duan, Y. Ren, and L. Zhang: Metall. Mater. Trans. B., 2019, vol. 50B, pp. 1476–89.10.1007/s11663-019-01535-x ↗
17. R.D. Morales, F.A. Calderon-Hurtado, K. Chattopadhyay, and S.J. Guarneros: Metall. Mater. Trans. B., 2020, vol. 51B, pp. 628–48.10.1007/s11663-019-01759-x ↗
18. J. Villela-Aguilar, J.A. Ramos-Banderas, C.A. Hernandez-Bocanegra, A. Uriostegui-Hernandez, and G. Solorio-Diaz: ISIJ Int., 2020, vol. 60, pp. 1172–78.10.2355/isijinternational.ISIJINT-2019-688 ↗
19. T. Haas, C. Schubert, M. Eickhoff, and H. Pfeifer: Metall. Mater. Trans. B., 2021, vol. 105B, pp. 903–21.10.1007/s11663-021-02064-2 ↗
20. O. Keplinger, N. Shevchenko, and S. Eckert: Int. J. Multiphase Flow., 2018, vol. 105, pp. 159–69.10.1016/j.ijmultiphaseflow.2018.04.001 ↗
21. O. Keplinger, N. Shevchenko, and S. Eckert: Int. J. Multiphase Flow., 2019, vol. 116, pp. 39–50.10.1016/j.ijmultiphaseflow.2019.03.027 ↗
22. N. Shevchenko, S. Boden, S. Eckert, D. Borin, M. Heinze, and S. Odenbach: Eur. Phys. J. Special Topics., 2013, vol. 220, pp. 63–77.10.1140/epjst/e2013-01797-y ↗
23. Y. Xie and F. Oeters: Steel Res. Int., 1992, vol. 63, pp. 93–104.10.1002/srin.199200478 ↗
24. Y. Xie, S. Orsten, and F. Oeters: ISIJ Int., 1992, vol. 32, pp. 66–75.10.2355/isijinternational.32.66 ↗
25. H. Tokunaga, M. Iguchi, and H. Tatemichi: Metall. Mater. Trans. B., 1999, vol. 30B, pp. 61–66.10.1007/s11663-999-0007-8 ↗
26. M. Iguchi and H. Tokunaga: Metall. Mater. Trans. B., 2002, vol. 33B, pp. 695–702.10.1007/s11663-002-0022-5 ↗
27. M. Thunman, S. Eckert, O. Hennig, J. Björkvall, and D. Sichen: Steel Res. Int., 2007, vol. 78, pp. 849–56.10.1002/srin.200706297 ↗
28. N. Vogl and H.-J. Odenthal: Multiphase flow simulation of a steelmaking ladle—CFD benchmark of the working group Fluid Mechanics of the German Steel Institute, Proceedings of the 13th Multiphase Flow Conference and Short Course: Simulation, Experiment & Application, Dresden, 2015, pp. 1–17.
29. M. Neifer, S. Rödl, N. Bannenberg and H. Lachmund: Proceedings Scaninject VII, 1995, Lulea, Sweden, Vol. 2, pp. 283–310.
30. M. Neifer, S. Rödl, N. Bannenberg, and H. Lachmund: Stahl Eisen., 1997, vol. 117, pp. 55–63.
31. H. Lachmund, B. Prothmann, D. Huin, H. Saint-Raymond and H. Gaye: La Revue de Métallurgie – CIT, 1998, vol. 95, pp. 487–99.10.1051/metal/199895040487 ↗
32. H. Lachmund, N. Bannenberg and T. Scherrmann: La Revue de Métallurgie—CIT, 1998, vol. 95, pp. 755–64.10.1051/metal/199895060755 ↗
33. N. Bannenberg, H. Lachmund, F. Oeters, and L. Zhang: Stahl Eisen., 1999, vol. 119, pp. 37–44.
34. K. Marx, S. Rödl, H. Lachmund, and Y. Xie: Stahl Eisen., 2006, vol. 126, pp. 97–106.
35. K. Timmel, S. Eckert, G. Gerbeth, F. Stefani, and T. Wondrak: ISIJ Int., 2010, vol. 50, pp. 1134–41.10.2355/isijinternational.50.1134 ↗
36. Y. Plevachuk, V. Sklyarchuk, G. Gerbeth, and S. Eckert: Int. J. Mater. Res., 2010, vol. 101, pp. 839–44.10.3139/146.110357 ↗
37. R.S. Hixson, M.A. Winkler, and M.L. Hodgdon: Phys. Rev. B., 1990, vol. 24, pp. 6485–91.10.1103/PhysRevB.42.6485 ↗
38. M.J. Assael, K. Kakosimos, R.M. Banish, J. Brillo, I. Egry, R.F. Brooks, P.N. Quested, K.C. Mills, A. Nagashima, Y. Sato, and W.A. Wakeham: J. Phys. Chem. Ref. Data., 2006, vol. 35, pp. 285–300.10.1063/1.2149380 ↗
39. K.C. Mills and R.F. Brooks: Mater. Sci. Eng. A., 1994, vol. 178, pp. 77–81.10.1016/0921-5093(94)90522-3 ↗
40. T. Dubberstein, H.P. Heller, J. Klostermann, R. Schwarze, and J. Brillo: J. Mater. Sci., 2015, vol. 50, pp. 7227–35.10.1007/s10853-015-9277-5 ↗
41. C.S. Kim: Thermophysical properties of stainless steel, Technical Report Argonne National Lab, 1975, ANL-75-55.10.2172/4152287 ↗
42. P. Pichler, B.J. Simonds, J.W. Sowards, and G. Potlacher: J. Mater. Sci., 2019, vol. 55, pp. 4081–93.10.1007/s10853-019-04261-6 ↗
43. B. Wilthan, H. Reschab, R. Tanzer, W. Schützenhofer, and G. Pottlacher: Int. J. Thermophys., 2008, vol. 29, pp. 434–44.10.1007/s10765-007-0300-1 ↗
44. VDI Wärmeatlas, Springer, Berlin, Heidelberg, 11. Edition, 2013, pp. 357 and 425.
45. O.C. Jones and J.M. Delhaye: Int. J. Multiphase Flow., 1976, vol. 3, pp. 89–116.10.1016/0301-9322(76)90001-X ↗
46. R. van der Welle: Int. J. Multiphase Flow., 1985, vol. 11, pp. 317–45.10.1016/0301-9322(85)90061-8 ↗
47. H. Turkoglu and B. Farouk: Int. J. Heat Mass Transfer., 1996, vol. 39, pp. 3401–15.10.1016/0017-9310(96)00026-9 ↗
48. M. Iguchi, T. Nakatani, and H. Kawabata: Metall. Mater. Trans. B., 1997, vol. 28B, pp. 409–16.10.1007/s11663-997-0106-3 ↗
49. Q. Wu and M. Ishii: Int. J. Multiphase Flow., 1999, vol. 25, pp. 155–73.10.1016/S0301-9322(98)00037-8 ↗
50. S. Eckert, G. Gerbeth, and O. Lielausis: Int. J. Multiphase Flow., 2000, vol. 26, pp. 67–82.10.1016/S0301-9322(99)00007-5 ↗
51. H. Kamioka and Y. Sumino: J. Phys. Soc. Japan., 1984, vol. 53, pp. 3036–41.10.1143/JPSJ.53.3036 ↗
52. Y. Takeda: Nucl. Technol., 1987, vol. 79, pp. 120–24.10.13182/NT87-A16010 ↗
53. Y. Takeda: Nucl. Eng. Design., 1991, vol. 126, pp. 277–84.10.1016/0029-5493(91)90117-Z ↗
54. S. Eckert and G. Gerbeth: Exp. Fluids., 2002, vol. 32, pp. 542–46.10.1007/s00348-001-0380-9 ↗
55. A. Cramer, C. Zhang, and S. Eckert: Flow Meas. Instrum., 2004, vol. 15, pp. 145–53.10.1016/j.flowmeasinst.2003.12.006 ↗
56. S. Eckert, G. Gerbeth, and V.I. Melnikov: Exp. Fluids., 2003, vol. 35, pp. 381–88.10.1007/s00348-003-0606-0 ↗
57. T. Vogt, S. Boden, A. Andruszkiewicz, K. Eckert, S. Eckert, and G. Gerbeth: Nucl. Eng. Design., 2015, vol. 294, pp. 16–23.10.1016/j.nucengdes.2015.07.072 ↗