Modeling of Ascending/Descending Velocity of Metal Droplet Emulsified in Pb-Salt System
Source abstract
Abstract
Metal–slag emulsion is an important process to enhance the reaction rate between the two phases; thus, it improves the heat and mass transfer of the process significantly. Various experimental studies have been carried out, and some system specific relations have been proposed by various investigators. A unified, theoretical study is lacking to model this complex phenomenon. Therefore, two simple models based on fundamental laws for metal droplet velocity (both ascending and descending) and bubble velocity, as well as its position at any instant of time, have been proposed. Analytical solutions have been obtained for the developed equations. Analytical solutions have been verified for the droplet velocity, traveling time, and size distribution in slag phase by performing high-temperature experiments in a Pb-salt system and comparing the obtained data with theory. The proposed model has also been verified with published experimental data for various liquid systems with a wide range of physical properties. A good agreement has been found between the analytical solution and the experimental and published data in all cases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Minerals Flotation and Separation Techniques · Metallurgical Processes and Thermodynamics · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. W. Duangsuwan and U. Tuzun: AIChE J., 2010, vol. 56, no. 12, pp. 3274–78.10.1002/aic.12208 ↗
2. N. Maruoka, F. Lazuardi, T. Maeyama, H. Nogami, G.S. Gupta, H. Shibata, and S. Kitamura: Proc. 3 rd Int. Conf. Process Development in Iron and Steelmaking, SCANMET III, Sweden, Luleå, MEFOS, 2008, vol. 2, pp. 449–58.
3. M. Martin, M. Endueles, and M. Diaz: Can. J. Chem. Eng., 2004, vol. 822, no. 2, pp. 249–55.10.1002/cjce.5450820206 ↗
4. M. Iguchi, K. Takahashi, H. Kawabata, K. Sasaki, S. Yokoyama, and H. Kiuchi: ISIJ Int., 1998, vol. 38, no. 10, pp. 1080–85.10.2355/isijinternational.38.1080 ↗
5. Q.L. He and N. Standish: ISIJ Int., 1990, vol. 30, no. 5, pp. 356–61.10.2355/isijinternational.30.356 ↗
6. Z. Lin and R.I.L. Guthrie: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 855–64.10.1007/BF02662767 ↗
7. D.Y. Song, N. Maruoka, S. Shibata, and S. Kitamura: ISIJ Int.., 2010, vol. 50, no. 11, pp. 1539–45.10.2355/isijinternational.50.1539 ↗
8. S. Kobayashi: ISIJ Int.., 1993, vol. 33, no. 5, pp. 577–82.10.2355/isijinternational.33.577 ↗
9. I.B. Ivanov, B. Radoev, E. Manev, and A. Scheludko: Trans. Faraday Soc., 1970, vol. 66, pp. 1262–73.10.1039/tf9706601262 ↗
10. N. Dietrich, S. Poncin, S. Pheulpin, and H.Z. Li: AIChE J., 2008, vol. 54, no. 3, pp. 594–600.10.1002/aic.11399 ↗
11. G.A. Greene, J.C. Chen, and M.T. Conlin: Int. J. Heat Mass Trans., 1988, vol. 31, no. 6, pp. 1309–17.10.1016/0017-9310(88)90073-7 ↗
12. P.D. Howell: J. Eng. Math., 1999, vol. 35, pp. 251–72.10.1023/A:1004399105606 ↗
13. T. Uemura, Y. Ueda, and M. Iguchi: Europhys. Lett., 2010, vol. 92, no. 3, p. 34004.10.1209/0295-5075/92/34004 ↗
14. N. Koichi, Y. Ueda, T. Uemura, T. Ishii, and M. Iguchi: ISIJ Int., 2011, vol. 51, no. 6, pp. 1011–13.10.2355/isijinternational.51.1011 ↗
15. S.T. Thoroddsen, T.G. Etoh, and K. Takehara: J. Fluid Mech., 2006, vol. 557, pp. 63–72.10.1017/S002211200600975X ↗
16. Subagyo, G.A. Brooks, and K.S. Coley: Can. Metall. Q., 2005, vol. 44 (1), pp. 119–30.10.1179/cmq.2005.44.1.119 ↗
17. J. Szekely and N.J. Themelis: Rate Phenomena in Process Metallurgy, Wiley-Interscience, New York, NY, 1971, p. 200.
18. G. Reiter and K. Schewerdtfeger: ISIJ Int., 1992, vol. 32, no. 1, pp. 57–65.10.2355/isijinternational.32.57 ↗
19. R. Clift, J.R. Grace, and M.E. Weber: Bubbles, Drops and Particles, Academic Press, New York, NY, 1987.
20. D.Y. Song, N. Maruoka, G.S. Gupta, S. Shibata, S. Kitamura, S. Naoto, Y. Ogawa, and M. Matsuo: ISIJ Int., 2012, vol. 52, no. 6, pp. 468–74.10.2355/isijinternational.52.1018 ↗