A Novel Modeling Method of Slag Foaming in BOF
Source abstract
Abstract
Based on the similarity principle, the slag foaming behavior was simulated with the physical modeling method in this investigation. Under the oxygen lance jet, the chemical reaction of NaCO3 powder dispersed in silicon oil with H2SO4 solution to release CO2 gas simulated the carbon-oxygen reaction between the slag and metal in BOF, during which the height was recorded. The slag viscosity and gas amount significantly affected on the slag foaming process and the foaming index.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Drilling and Well Engineering · Enhanced Oil Recovery Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. [1] G. Qiu, C. Shan, X. Zhang, X. Lv: Ironmak. Steelmak., 2017, vol. 44, pp. 246-254.10.1080/03019233.2016.1210360 ↗
2. [2] Y. Zhang, R. J. Fruehan: Metall. Mater. Trans. B, 1995, vol. 26, pp. 813-819.10.1007/BF02651728 ↗
3. [3] S. M. Jung, R. J. Fruehan: ISIJ Int., 2000, vol. 40, pp. 348-355.10.2355/isijinternational.40.348 ↗
4. [4] B. Deo, A. Overbosch, B. Snoeijer, D. Das, K. Srinivas: Trans. Indian Inst. Met., 2013, vol. 66, pp. 543-554.10.1007/s12666-013-0306-2 ↗
5. [5] C. Nexhip, S. Sun, S. Jahanshahi: Int. Metall. Rev., 2004, vol. 49, pp. 286-298.10.1179/095066004225021945 ↗
6. [6] J. Martinsson, B. Glaser, S Du: Metall. Mater. Trans. B, 2016, vol. 47, pp. 2710-2713.10.1007/s11663-016-0760-4 ↗
7. [7] M. Y. Zhu, S. Du: Steel Res. Int., 2000, vol. 71, pp. 76-82.10.1002/srin.200005693 ↗
8. [8] L. Wu, G. J. Albertsson, S. Du: Ironmak. Steelmak., 2010, 37(8): 612-619.10.1179/030192310X12690127076550 ↗
9. [9] S. Barella, A. Gruttadauria, C. Mapelli, D. Mombelli: Ironmak. Steelmak., 2010, vol. 39, pp. 463-469.10.1179/1743281212Y.0000000009 ↗
10. [10] A. Kapilashrami, M. Görnerup, A. K. Lahiri, S. Seetharaman: Metall. Mater. Trans. B, 2006, vol. 37, pp. 109-117.10.1007/s11663-006-0090-z ↗
11. [11] R. D. Morales, H. Rodríguez-Hernández, A. Vargas-Zamora, A. N. Conejo: Ironmak. Steelmak., 2002, vol. 29, pp. 445-453.10.1179/030192302225004629 ↗
12. [12] S. Sabah, G. Brooks: ISIJ Int., 2014, vol. 54, pp. 836-844.10.2355/isijinternational.54.836 ↗
13. [13] S. Sabah, G. Brooks: Metall. Mater. Trans. B, 2015, vol.46, pp. 863-872.10.1007/s11663-014-0238-1 ↗
14. [14] M. J. Luomala, E. O. Virtanen, P. T. Mure, T. P. Siivola, T. M. Fabritius, J. J. Härkki: Steel Res. Int., 2002, vol. 73, pp. 9-14.10.1002/srin.200200166 ↗
15. [15] T. Fabritius, P. Mure, E. Virtanen, P. Hannula, M. Luomala, J. Härkki: Ironmak. Steelmak., 2002, vol. 29, pp. 29-35.10.1179/030192302225005556 ↗
16. [16] L. Cao, Q. Liu, J. Sun, W. Lin, X. Peng: JOM, 2019, vol. 71, pp. 754-763.10.1007/s11837-018-3243-z ↗
17. [17] L. Cao, Q. Liu, Z. Wang, N. Li: Ironmak. Steelmak., 2018, vol. 45, pp. 239-248.10.1080/03019233.2016.1255373 ↗
18. [18] M. Li, Q. Li, S. Kuang, Z. Zong: Ind. Eng. Chem. Res., 2016, vol. 55, pp. 3630-3640.10.1021/acs.iecr.5b03301 ↗
19. [19] M. Y. Zhu, T. Jones, S. Du: Scand. J. Metall., 2001, vol. 30, pp. 51-56.10.1034/j.1600-0692.2001.d01-37.x ↗
20. [20] M. Li, Q. Li, S. Kuang, Z.S. Zou: Metall. Mater. Trans. B, 2016, vol. 47, pp.116-126.10.1007/s11663-015-0490-z ↗
21. [27] K. Ito, R. J. Fruehan: Metall. Mater. Trans. B, 1989, vol. 20, pp. 509-514.10.1007/BF02654600 ↗
22. [21] V. Gergely, T. W. Clyne: Acta Mater., 2004, vol. 52, pp. 3047-3058.10.1016/j.actamat.2004.03.007 ↗
23. M. Tong, K. Cole, S. J. Neethling: Colloids Surf. A, 2011, vol. 382, pp. 42-49.10.1016/j.colsurfa.2010.11.007 ↗
24. [23] Stevenson Paul: Chem. Eng. Sci., 2006, vol. 61, pp. 4503-4510.10.1016/j.ces.2006.02.026 ↗
25. [24] A. A. Kozhukhov: Steel Transl., 2014, vol. 44, pp. 136-139.10.3103/S0967091214020107 ↗
26. [25] J. Ruuska, A. Sorsa, S. Ollila, K. Leiviskä: IFAC- Pap. OnLine, 2015, vol. 48, pp. 171-176.10.1016/j.ifacol.2015.10.098 ↗
27. [26] C. Cicutti, M. Martín, R. Donayo, A. Gómez: Rev. Metall., 2011, vol. 107, pp. 309-317.10.1051/metal/2010100 ↗