Evolution of Lattice Spacing of Gamma Double Prime Precipitates During Aging of Polycrystalline Ni-Base Superalloys: An In Situ Investigation
Source abstract
Abstract
Abstract Polycrystalline Ni-base superalloy Inconel 718 derives the strengthening mainly from Ni3Nb γ″ phase. To investigate the evolution of lattice spacing of γ″ precipitates, in situ neutron diffraction experiments were performed during aging heat treatment of two Inconel 718 bar samples at 780 °C for 8 hours. One sample was aged with a negligible applied stress (5 MPa) and the other with an applied tensile stress of 300 MPa. The diffraction data demonstrate three stages of lattice spacing evolution due to compositional and morphological changes during aging. (1) Stage I, the γ lattice spacing decreases isotropically in the first hour of aging as the composition changes. (2) Stage II, the γ lattice spacing decreases and the γ″ lattice spacing increases between 1 and 5 hours of aging, at this stage compositional change on the lattice evolution weakens with aging time and the morphological change becomes comparable. (3) Stage III, as aging proceeds, compositional change is negligible, while morphological change is dominant; the γ lattice spacing decreases in the longitudinal direction but increases in the transverse direction; in contrast, the converse occurs in γ″ lattice spacing evolution.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M.C. Chaturvedi, Y.F. Han: Met. Sci., 1983, vol. 17, pp. 145-149.10.1179/030634583790421032 ↗
2. J.M. Oblak, D.S. Duvall, D.F. Paulonis: Mater. Sci. Eng., 1974, vol. 13, pp. 51-56.10.1016/0025-5416(74)90020-2 ↗
3. C. Slama, C. Servant, G. Cizeron: J. Mater. Res., 1997, vol. 12, pp. 2298-2316.10.1557/JMR.1997.0306 ↗
4. J.M. Oblak, D.F. Paulonis, D.S. Duvall: Metall. Trans., 1974, vol. 5, p. 143.10.1007/BF02644342 ↗
5. R. Cozar, A. Pineau: Metall. Mater. Trans. B, 1973, vol. 4, pp. 47-59.10.1007/BF02649604 ↗
6. H. Qin, Z. Bi, H. Yu, G. Feng, J. Du, J. Zhang: J. Alloys Compd., 2018, vol. 740, pp. 997-1006.10.1016/j.jallcom.2018.01.030 ↗
7. H. Qin, Z. Bi, H. Yu, G. Feng, R. Zhang, X. Guo, H. Chi, J. Du, J. Zhang: Mater. Sci. Eng. A, 2018, vol. 728, pp. 183-195.10.1016/j.msea.2018.05.016 ↗
8. D. McAllister, D. Lv, B. Peterson, H. Deutchman, Y. Wang, M.J. Mills: Scr. Mater., 2016, vol. 115, pp. 108-112.10.1016/j.scriptamat.2015.11.026 ↗
9. Y. Ji, Y. Lou, M. Qu, J.D. Rowatt, F. Zhang, T.W. Simpson, L.-Q. Chen: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3235-3247.10.1007/s11661-016-3480-0 ↗
10. D.P. McAllister, Ph.D Thesis, The Ohio State University, 2016.
11. N. Zhou, D.C. Lv, H.L. Zhang, D. McAllister, F. Zhang, M.J. Mills, Y. Wang: Acta Mater., 2014, vol. 65, pp. 270-286.10.1016/j.actamat.2013.10.069 ↗
12. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet, P. Héritier: Mater. Sci. Eng. A, 2008, vol. 486, pp. 117-122.10.1016/j.msea.2007.08.046 ↗
13. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1992, vol. 23, pp. 2015-2028.10.1007/BF02647549 ↗
14. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847-864.10.1016/0001-6160(88)90139-3 ↗
15. H. Qin, Z. Bi, D. Li, R. Zhang, T.L. Lee, G. Feng, H. Dong, J. Du, J. Zhang: Mater. Sci. Eng. A, 2019, vol. 742, pp. 493-500.10.1016/j.msea.2018.11.028 ↗
16. M.J. Donachie, S.J. Donachie: Superalloys: A Technical Guide Second Edition, ASM International, Materials Park, US, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
17. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, B. Nenchev, J. Zhang, S. Kabra, J. Kelleher, H.B. Dong: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5421-5432.10.1007/s11661-019-05393-9 ↗
18. M. Gao, D.G. Harlow, R.P. Wei, S. Chen: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3391-3398.10.1007/BF02595432 ↗
19. D. Jianxin, X. Xishan, Z. Shouhua: Scr. Metall. Mater., 1995, vol. 33, pp. 1933-1940.10.1016/0956-716X(95)00446-3 ↗
20. Y.F. Han, P. Deb, M.C. Chaturvedi: Met. Sci., 1982, vol. 16, pp. 555-562.10.1179/030634582790427118 ↗
21. D.F. Paulonis, J.M. Oblak, D.S. Duvall (1969) ASM Trans. Quart. vol. 62, pp. 611-622.
22. I. Kirman, D.H. Warrington: Metall. Trans., 1970, vol. 1, pp. 2667-2675.10.1007/BF03037800 ↗
23. M.G. Burke, M.K. Miller, in: E.A. Loria (Ed.) Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, Pittsburgh, US, 1991.
24. M. Sundararaman, P. Mukhopadhyay: Mater. Charact., 1993, vol. 31, pp. 191-196.10.1016/1044-5803(93)90062-Z ↗
25. C. Slama, M. Abdellaoui: J. Alloys Compd., 2000, vol. 306, pp. 277-284.10.1016/S0925-8388(00)00789-1 ↗
26. R.C. Reed: The superalloys: fundamentals and applications, 1st. ed., Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
27. S.H. Wen, E. Kostlan, M. Hong, A.G. Khachaturyan, J.W. Morris: Acta Metall., 1981, vol. 29, pp. 1247-1254.10.1016/0001-6160(81)90015-8 ↗
28. J.D. Eshelby (1957) Mater. A vol. 241, pp. 376-396.10.1098/rspa.1957.0133 ↗
29. T. Mura: Micromechanics of Defects in Solids, Springer Netherlands, 1987.10.1007/978-94-009-3489-4 ↗
30. J. Santisteban, M. Daymond, J. James, L. Edwards: J. Appl. Crystallogr., 2006, vol. 39, pp. 812-825.10.1107/S0021889806042245 ↗
31. A.C. Larson, R.B. Von Dreele, Los Alamos National Laboratory Report LAUR, 2004, pp. 84–748.
32. P.E. Aba-Perea, T. Pirling, M. Preuss (2016) Mater. Des. 110:925–3110.1016/j.matdes.2016.07.078 ↗
33. M.T. Hutchings, P.J. Withers, T.M. Holden, T. Lorentzen: Introduction to the characterization of residual stress by neutron diffraction, Taylor & Francis, Boca Raton, Fla., 2005.10.1201/9780203402818 ↗
34. R. Lawitzki, S. Hassan, L. Karge, J. Wagner, D. Wang, J. von Kobylinski, C. Krempaszky, M. Hofmann, R. Gilles, G. Schmitz: Acta Mater., 2019, vol. 163, pp. 28-39.10.1016/j.actamat.2018.10.014 ↗
35. D.Y. Li, L.Q. Chen: Acta Mater., 1998, vol. 46, pp. 2573-2585.10.1016/S1359-6454(97)00478-3 ↗
36. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1988, vol. 19, pp. 453-465.10.1007/BF02649259 ↗
37. D.M. Collins, D.J. Crudden, E. Alabort, T. Connolley, R.C. Reed: Acta Mater., 2015, vol. 94, pp. 244-256.10.1016/j.actamat.2015.04.046 ↗