journal article·2002-08

The massive transformation in titanium aluminides: Initial stages of nucleation and growth

J. E. Wittig

Publisher page

Abstract

Rapid solidification by twin-anvil splat quenching captures the initial nucleation and growth of the α → γm massive transformation in titanium aluminides. Splat quenching Ti52Al48 and Ti50Al48Cr2 from the liquid at slightly below the melting point produces an equiaxed α solidification structure. Solid-state cooling rates that approach 106 K/s arrest the α → γm massive transformation with 1- to 5-µm-sized γm nuclei, especially in the Ti50Al48Cr2 alloy. Classical massive-transformation heterogenous nucleation occurs at α:α grain boundaries with an orientation relationship of [111]γ//[0001]α and \(\{ 110\} _\gamma //\{ 11\bar 20\} _\alpha \). The γm nucleus then grows into the adjacent α grain without the orientation relationship by forming an incoherent α:γ interface with {111}γ facets. Orthogonal variants of the tetragonal c-axis in the γm product suggest that the massive transformation initially produces an fcc structure which subsequently orders into the L10 phase. Nucleation of γm is not only observed at α:α grain boundaries and triple points, but also within the α grains. The intragranular γm nucleation, which is believed to be heterogeneous, occurs with the same orientation relationship as for the intergranular nuclei. However, the intragrain nuclei do not form {111}γ facets and retain a curved α:γm interface. Although analysis of the {111}γ faceted growth using weak-beam dark-field (WBDF) imaging shows no evidence for any type of misfit-compensating dislocations, lattice imaging of the {111}γ facets with high resolution transmission electron microscopy (HRTEM) reveals that the planar interface exhibits a slight curvature, produced by atomic steps of (111) planes. These experimental data have been used to estimate a ratio of ledge spacing (λ) to ledge height (h) for the {111}γ facets as λ/h=41, which is similar to calculated values for a ledge growth mechanism of massive transformations in Cu-Zn and Ag-Cd alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. S.K. Bhattacharyya, J.H. Perepezko, and T.B. Massalski: Acta Metall., 1974, vol. 22, pp. 879–86.10.1016/0001-6160(74)90054-6 ↗
2. J.H. Perepezko: Metall. Trans. A, 1984, vol. 15A, pp. 437–47.10.1007/BF02644967 ↗
3. M.R. Plichta, W.A.T. Clark, and H.I. Aaronson: Metall. Trans. A, 1984, vol. 15A, pp. 427–35.10.1007/BF02644966 ↗
4. E.B. Hawbolt and T.B. Massalski: Metall. Trans., 1970, vol. 1, pp. 2315–22.10.1007/BF02643450 ↗
5. J.D. Ayers and and D.C. Joy: Acta Metall., 1972, vol. 20 pp. 1371–79.10.1016/0001-6160(72)90072-7 ↗
6. J.D. Ayers: Acta Metall., 1980, vol. 28, pp. 1513–22.10.1016/0001-6160(80)90052-8 ↗
7. M.R. Plichta, J.H. Perepezko, H.I. Aaronson, and W.F. Lange III: Acta Metall., 1980, vol. 28, pp. 1031–40.10.1016/0001-6160(80)90087-5 ↗
8. M.R. Plichta and H.I. Aaronson: Acta Metall., 1980, vol. 28 pp. 1041–57.10.1016/0001-6160(80)90088-7 ↗
9. E.S.K. Menon, M.R. Plichta, and H.I. Aaronson: Acta Metall., 1988, vol. 36, pp. 321–32.10.1016/0001-6160(88)90009-0 ↗
10. P. Wang, G.B. Viswanathan, and V.K. Vasudevan: Metall. Trans. A, 1992, vol. 23A, pp. 690–97.10.1007/BF02801187 ↗
11. P. Wang and V.K. Vasudevan: Scripta Metall., 1992, vol. 27, pp. 89–94.10.1016/0956-716X(92)90325-9 ↗
12. S.A. Jones and M.J. Kaufman: Acta Metall., 1993, vol. 41, pp. 387–98.10.1016/0956-7151(93)90069-5 ↗
13. X.D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgill, M.J. Kaufman, and M.H. Loretto: Acta Mater., 1996, vol. 44, pp. 3723–34.10.1016/1359-6454(95)00453-X ↗
14. X.D. Zhang, Y.G. Li, M.J. Kaufman, and M.H. Loretto: Acta Mater., 1996, vol. 44, pp. 3735–47.10.1016/1359-6454(95)00454-8 ↗
15. P. Wang, M. Kumar, D. Veeraraghaven, and V.K. Vasudevan: Acta Mater., 1998, vol. 46, pp. 13–30.10.1016/S1359-6454(97)00237-1 ↗
16. D. Veeraraghavan, P. Wang, and V.K. Vasudaven: Acta Mater., 1999, vol. 47 (11), pp. 3313–30.10.1016/S1359-6454(99)00195-0 ↗
17. J.E. Wittig and W.H. Hofmeister: Microsc. Microanal., 1998, vol. 4 (2) pp. 538–39.10.1017/S1431927600022819 ↗
18. T.M. Miller, L. Wang, W.H. Hofmeister, J.E. Wittig, and I.M. Anderson: Mater. Res. Soc. Symp. Proc., 2001 vol. 589 pp. 123–28.10.1557/PROC-589-123 ↗
19. D.E. Simms: Master’s Thesis, Vanderbilt University, Nashville, TN, 1996.
20. M.H. Loretto and R.E. Smallman: Defect Analysis in Electron Microscopy, John Wiley and Sons Inc., New York, NY, 1975, pp. 91–98.
21. H.I. Aaronson: Metall. Trans. A, 1993, vol. 24A, pp. 241–7610.1007/BF02657313 ↗
22. H.I. Aaronson and F.K. LeGoues: Metall. Trans. A, 1992, vol. 23A, pp. 1915–44.10.1007/BF02647541 ↗