journal article·2023-03

Functionalized graphene–epoxy nanocomposites: experimental investigation of viscoelastic and viscoplastic behaviors

Ozgen U. Colak, Besim Birkan, Okan Bakbak, Alperen Acar, Deniz Uzunsoy

Publisher page

Abstract

© 2021, The Author(s), under exclusive licence to Springer Nature B.V.In this work, graphene–epoxy nanocomposites are produced for two different graphene fractions (0.1 and 0.5 wt%). Three-roll milling is used as the main strategy to achieve a homogeneous dispersion and prevent agglomeration. To improve the interfacial bonding between graphene nanoflakes (GNF) and epoxy matrix, GNFs are functionalized using Triton X-100 as a surfactant. The effectiveness of this functionalization is investigated using Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR). These spectroscopy results show that the Triton X-100 molecules are successfully adsorbed on the surface of GNFs. To investigate the total viscoelastic–viscoplastic behavior of the nanocomposites, compression tests at three different quasistatic strain rates (1.E-1, 1.E-2, 1.E-3 /s), creep tests at two different stress levels and relaxation tests at two different strain levels are performed. The total time-dependent mechanical behavior of the produced nanocomposites is therefore characterized comprehensively. Elasticity-modulus values obtained from compression tests increased up to 29% and yield stress increased up to 18%. In creep tests, it is observed that the creep strain decreased 32% and 65% at 50 and 100 MPa stress levels, respectively, at 0.1 wt% functionalized graphene flakes (f-GNF)–epoxy nanocomposite. At the same time, with the addition of 0.1 wt% f-GNF to epoxy, during relaxation tests, the stress drop decreased up to 47% compared to pure epoxy at a 3.16% constant strain level. Both creep and relaxation resistance improved when compared to pure epoxy. This total improvement in the mechanical behaviors is explained with the effective dispersion of the GNFs and also a strong interface between the GNFs and the epoxy matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Mechanical Behavior of Composites · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Acar, A., Çolak, Ö.Ü., Uzunsoy, D.: Synthesis and characterization of graphene-epoxy nanocomposites. Mater. Test. 57, 1001–1005 (2015). https://doi.org/10.3139/120.11080410.3139/120.110804 ↗
2. Ahmadi-Moghadam, B., Taheri, F.: Effect of processing parameters on the structure and multi-functional performance of epoxy/GNP-nanocomposites. J. Mater. Sci. 49, 6180–6190 (2014). https://doi.org/10.1007/s10853-014-8332-y10.1007/s10853-014-8332-y ↗
3. Anwer, M.A.S., Wang, J., Naguib, H.E.: 1D/2D CNF/GNP hybrid nanofillers: evaluation of the effect of surfactant on the morphological, mechanical, fracture, and thermal characteristics of their nanocomposites with epoxy resin. Ind. Eng. Chem. Res. 58, 8131–8139 (2019). https://doi.org/10.1021/acs.iecr.9b0095610.1021/acs.iecr.9b00956 ↗
4. Bakbak, O., Birkan, B.E., Acar, A., Colak, O.: Mechanical characterization of Araldite LY 564 epoxy: creep, relaxation, quasi-static compression and high strain rate behaviors. Polym. Bull. (2021). https://doi.org/10.1007/s00289-021-03624-x10.1007/s00289-021-03624-x ↗
5. Balandin, A.A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., Lau, C.N.: Superior thermal conductivity of single-layer graphene. Nano Lett. 8, 902–907 (2008). https://doi.org/10.1021/nl073187210.1021/nl0731872 ↗
6. Carrasco, P.M., Montes, S., García, I., Borghei, M., Jiang, H., Odriozola, I., Cabañero, G., Ruiz, V.: High-concentration aqueous dispersions of graphene produced by exfoliation of graphite using cellulose nanocrystals. Carbon 70, 157–163 (2014). https://doi.org/10.1016/j.carbon.2013.12.08610.1016/j.carbon.2013.12.086 ↗
7. Chandrasekaran, S., Seidel, C., Schulte, K.: Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: mechanical, electrical and thermal properties. Eur. Polym. J. 49, 3878–3888 (2013). https://doi.org/10.1016/j.eurpolymj.2013.10.00810.1016/j.eurpolymj.2013.10.008 ↗
8. Chandrasekaran, S., Sato, N., Tölle, F., Mülhaupt, R., Fiedler, B., Schulte, K.: Fracture toughness and failure mechanism of graphene based epoxy composites. Compos. Sci. Technol. 97, 90–99 (2014). https://doi.org/10.1016/j.compscitech.2014.03.01410.1016/j.compscitech.2014.03.014 ↗
9. Chen, Y., Zhao, H., Sheng, L., Yu, L., An, K., Xu, J., Ando, Y., Zhao, X.: Mass-production of highly-crystalline few-layer graphene sheets by arc discharge in various H2–inert gas mixtures. Chem. Phys. Lett. 538, 72–76 (2012). https://doi.org/10.1016/j.cplett.2012.04.02010.1016/j.cplett.2012.04.020 ↗
10. Colak, O.U., Cakir, Y.: Material model parameter estimation with genetic algorithm optimization method and modeling of strain and temperature dependent behavior of epoxy resin with cooperative-VBO model. Mech. Mater. 135, 57–66 (2019). https://doi.org/10.1016/j.mechmat.2019.04.02310.1016/j.mechmat.2019.04.023 ↗
11. Colak, Ö.U., Bahlouli, N., Uzunsoy, D., Francart, C.: High strain rate behavior of graphene-epoxy nanocomposites. Polym. Test. 81, 106219 (2020). https://doi.org/10.1016/j.polymertesting.2019.10621910.1016/j.polymertesting.2019.106219 ↗
12. Cotul, U., Parmak, E.D.S., Kaykilarli, C., Saray, O., Colak, O., Uzunsoy, D.: Development of high purity, few-layer graphene synthesis by electric arc discharge technique. Acta Phys. Pol. A 134, 289–291 (2018). https://doi.org/10.12693/APhysPolA.134.28910.12693/APhysPolA.134.289 ↗
13. Dai, J., Peng, C., Wang, F., Zhang, G., Huang, Z.: Effects of functionalized graphene nanoplatelets on the morphology and properties of phenolic resins. J. Nanomater. 2016, 1–7 (2016). https://doi.org/10.1155/2016/348516710.1155/2016/3485167 ↗
14. Geng, Y., Liu, M.Y., Li, J., Shi, X.M., Kim, J.K.: Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites. Composites, Part A, Appl. Sci. Manuf. 39, 1876–1883 (2008). https://doi.org/10.1016/j.compositesa.2008.09.00910.1016/j.compositesa.2008.09.009 ↗
15. Georgakilas, V., Tiwari, J.N., Kemp, K.C., Perman, J.A., Bourlinos, A.B., Kim, K.S., Zboril, R.: Noncovalent functionalization of graphene and graphene oxide for energy materials, biosensing, catalytic, and biomedical applications. Chem. Rev. 116, 5464–5519 (2016). https://doi.org/10.1021/acs.chemrev.5b0062010.1021/acs.chemrev.5b00620 ↗
16. Hashim, U.R., Jumahat, A.: Improved tensile and fracture toughness properties of graphene nanoplatelets filled epoxy polymer via solvent compounding shear milling method. Mater. Res. Express 6, 025303 (2018). https://doi.org/10.1088/2053-1591/aaeaf010.1088/2053-1591/aaeaf0 ↗
17. Imran, K.A., Shivakumar, K.N.: Enhancement of electrical conductivity of epoxy using graphene and determination of their thermo-mechanical properties. J. Reinf. Plast. Compos. 37, 118–133 (2018). https://doi.org/10.1177/073168441773614310.1177/0731684417736143 ↗
18. Jang, J.I.: New Developments in Photon and Materials Research. Nova Science Publishers, Incorporated, ??? (2013)
19. Jian, W., Lau, D.: Creep performance of CNT-based nanocomposites: a parametric study. Carbon 153, 745–756 (2019). https://doi.org/10.1016/j.carbon.2019.07.06910.1016/j.carbon.2019.07.069 ↗
20. Kaykılarlı, C., Uzunsoy, D., Parmak, E.D.Ş., Fellah, M.F., Çakır, Ö.Ç.: Boron and nitrogen doping in graphene: an experimental and density functional theory (DFT) study. Nano Express 1, 010027 (2020). https://doi.org/10.1088/2632-959X/ab89e910.1088/2632-959X/ab89e9 ↗
21. Khabaz-Aghdam, A., Behjat, B., da Silva, L.F.M., Marques, E.A.S.: A new theoretical creep model of an epoxy-graphene composite based on experimental investigation: effect of graphene content. J. Compos. Mater. 54, 2461–2472 (2020). https://doi.org/10.1177/002199831989580610.1177/0021998319895806 ↗
22. Kudin, K.N., Ozbas, B., Schniepp, H.C., Prud’homme, R.K., Aksay, I.A., Car, R.: Raman spectra of graphite oxide and functionalized graphene sheets. Nano Lett. 8, 36–41 (2008). https://doi.org/10.1021/nl071822y10.1021/nl071822y ↗
23. Lee, H.-N., Paeng, K., Swallen, S.F., Ediger, M.D.: Direct measurement of molecular mobility in actively deformed polymer glasses. Science 323, 231–234 (2009). https://doi.org/10.1126/science.116599510.1126/science.1165995 ↗
24. Li, Q., Church, J.S., Kafi, A., Naebe, M., Fox, B.L.: An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents. J. Nanopart. Res. 16, 2513 (2014). https://doi.org/10.1007/s11051-014-2513-010.1007/s11051-014-2513-0 ↗
25. Li, Y., Tang, J., Huang, L., Wang, Y., Liu, J., Ge, X., Tjong, S.C., Li, R.K.Y., Belfiore, L.A.: Facile preparation, characterization and performance of noncovalently functionalized graphene/epoxy nanocomposites with poly(sodium 4-styrenesulfonate). Composites, Part A, Appl. Sci. Manuf. 68, 1–9 (2015). https://doi.org/10.1016/j.compositesa.2014.09.01610.1016/j.compositesa.2014.09.016 ↗
26. Malysheva, G.V., Akhmetova, E.S., Marycheva, A.N.: Estimation of glass transition temperature of polysulfone-modified epoxy binders. Glass Phys. Chem. 40, 543–548 (2014). https://doi.org/10.1134/S108765961405009510.1134/S1087659614050095 ↗
27. Martin-Gallego, M., Yuste-Sanchez, V., Sanchez-Hidalgo, R., Verdejo, R., Lopez-Manchado, M.A.: Epoxy nanocomposites filled with carbon nanoparticles. Chem. Rec. 18, 928–939 (2018). https://doi.org/10.1002/tcr.20170009510.1002/tcr.201700095 ↗
28. McAllister, M.J., Li, J.-L., Adamson, D.H., Schniepp, H.C., Abdala, A.A., Liu, J., Herrera-Alonso, M., Milius, D.L., Car, R., Prud’homme, R.K., Aksay, I.A.: Single sheet functionalized graphene by oxidation and thermal expansion of graphite. Chem. Mater. 19, 4396–4404 (2007). https://doi.org/10.1021/cm063080010.1021/cm0630800 ↗
29. Mohd Amran, N.A., Ahmad, S., Chen, R.S., Shahdan, D., Flaifel, M.H., Omar, A.: Assessment of mechanical and electrical performances of polylactic acid/liquid natural rubber/graphene platelets nanocomposites in the light of different graphene platelets functionalization routes. Macromol. Chem. Phys. 222, 2100185 (2021). https://doi.org/10.1002/macp.20210018510.1002/macp.202100185 ↗
30. Moriche, R., Prolongo, S.G., Sánchez, M., Jiménez-Suárez, A., Sayagués, M.J., Ureña, A.: Morphological changes on graphene nanoplatelets induced during dispersion into an epoxy resin by different methods. Composites, Part B, Eng. 72, 199–205 (2015). https://doi.org/10.1016/j.compositesb.2014.12.01210.1016/j.compositesb.2014.12.012 ↗
31. Ni, Z., Wang, Y., Yu, T., Shen, Z.: Raman spectroscopy and imaging of graphene. Nano Res. 1, 273–291 (2008). https://doi.org/10.1007/s12274-008-8036-110.1007/s12274-008-8036-1 ↗
32. Papanicolaou, G.C., Xepapadaki, A.G., Drakopoulos, E.D., Papaefthymiou, K.P., Portan, D.V.: Interphasial viscoelastic behavior of CNT reinforced nanocomposites studied by means of the concept of the hybrid viscoelastic interphase. J. Appl. Polym. Sci. 124, 1578–1588 (2012). https://doi.org/10.1002/app.3520210.1002/app.35202 ↗
33. Poutrel, Q.-A., Wang, Z., Wang, D., Soutis, C., Gresil, M.: Effect of pre and post-dispersion on electro-thermo-mechanical properties of a graphene enhanced epoxy. Appl. Compos. Mater. 24, 313–336 (2017). https://doi.org/10.1007/s10443-016-9541-010.1007/s10443-016-9541-0 ↗
34. Prolongo, S.G., Jimenez-Suarez, A., Moriche, R., Ureña, A.: In situ processing of epoxy composites reinforced with graphene nanoplatelets. Compos. Sci. Technol. 86, 185–191 (2013). https://doi.org/10.1016/j.compscitech.2013.06.02010.1016/j.compscitech.2013.06.020 ↗
35. Qamar, S., Yasin, S., Ramzan, N., Iqbal, T., Akhtar, M.N.: Preparation of stable dispersion of graphene using copolymers: dispersity and aromaticity analysis. Soft Mater. 17, 190–202 (2019). https://doi.org/10.1080/1539445X.2019.158367310.1080/1539445X.2019.1583673 ↗
36. Shadlou, S., Ahmadi-Moghadam, B., Taheri, F.: The effect of strain-rate on the tensile and compressive behavior of graphene reinforced epoxy/nanocomposites. Mater. Des. 59, 439–447 (2014). https://doi.org/10.1016/j.matdes.2014.03.02010.1016/j.matdes.2014.03.020 ↗
37. Tan, H., Jiang, L.Y., Huang, Y., Liu, B., Hwang, K.C.: The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials. Compos. Sci. Technol. 67, 2941–2946 (2007). https://doi.org/10.1016/j.compscitech.2007.05.01610.1016/j.compscitech.2007.05.016 ↗
38. Tang, L.-C., Wang, X., Gong, L.-X., Peng, K., Zhao, L., Chen, Q., Wu, L.-B., Jiang, J.-X., Lai, G.-Q.: Creep and recovery of polystyrene composites filled with graphene additives. Compos. Sci. Technol. 91, 63–70 (2014). https://doi.org/10.1016/j.compscitech.2013.11.02810.1016/j.compscitech.2013.11.028 ↗
39. Wan, Y.-J., Tang, L.-C., Yan, D., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., Lai, G.-Q.: Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process. Compos. Sci. Technol. 82, 60–68 (2013). https://doi.org/10.1016/j.compscitech.2013.04.00910.1016/j.compscitech.2013.04.009 ↗
40. Wang, X., Jin, J., Song, M.: An investigation of the mechanism of graphene toughening epoxy. Carbon 65, 324–333 (2013). https://doi.org/10.1016/j.carbon.2013.08.03210.1016/j.carbon.2013.08.032 ↗
41. Wang, F., Drzal, L.T., Qin, Y., Huang, Z.: Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J. Mater. Sci. 50, 1082–1093 (2015a). https://doi.org/10.1007/s10853-014-8665-610.1007/s10853-014-8665-6 ↗
42. Wang, X., Gong, L.-X., Tang, L.-C., Peng, K., Pei, Y.-B., Zhao, L., Wu, L.-B., Jiang, J.-X.: Temperature dependence of creep and recovery behaviors of polymer composites filled with chemically reduced graphene oxide. Composites, Part A, Appl. Sci. Manuf. 69, 288–298 (2015b). https://doi.org/10.1016/j.compositesa.2014.11.03110.1016/j.compositesa.2014.11.031 ↗
43. Wu, Y., Wang, B., Ma, Y., Huang, Y., Li, N., Zhang, F., Chen, Y.: Efficient and large-scale synthesis of few-layered graphene using an arc-discharge method and conductivity studies of the resulting films. Nano Res. 3, 661–669 (2010). https://doi.org/10.1007/s12274-010-0027-310.1007/s12274-010-0027-3 ↗
44. Yang, J., Zhang, Z., Friedrich, K., Schlarb, A.K.: Creep resistant polymer nanocomposites reinforced with multiwalled carbon nanotubes. Macromol. Rapid Commun. 28, 955–961 (2007). https://doi.org/10.1002/marc.20060086610.1002/marc.200600866 ↗
45. Zandiatashbar, A., Picu, C.R., Koratkar, N.: Control of epoxy creep using graphene. Small 8, 1676–1682 (2012). https://doi.org/10.1002/smll.20110268610.1002/smll.201102686 ↗
46. Zhang, W., Joshi, A., Wang, Z., Kane, R.S., Koratkar, N.: Creep mitigation in composites using carbon nanotube additives. Nanotechnology 18, 185703 (2007). https://doi.org/10.1088/0957-4484/18/18/18570310.1088/0957-4484/18/18/185703 ↗
47. Zhang, G., Wang, F., Dai, J., Huang, Z.: Effect of functionalization of graphene nanoplatelets on the mechanical and thermal properties of silicone rubber composites. Materials 9, 92 (2016). https://doi.org/10.3390/ma902009210.3390/ma9020092 ↗