journal article·2023-03Open access

Amino-tethering synthesis strategy toward highly accessible sub-3-nm L10-PtM catalysts for high-power fuel cells

Qing Gong, Hong Zhang, Haoran Yu, Sungho Jeon, Yang Ren, Zhenzhen Yang, Cheng-Jun Sun, Eric A. Stach, Alexandre C. Foucher, Yikang Yu, Matthew Smart, Gabriel M. Filippelli, David A. Cullen, Ping Liu, Jian Xie

Matter· Volume 6· Issue 3

Abstract

Because of the poor accessibility of embedded active sites, platinum (Pt)-based electrocatalysts suffer from insufficient Pt utilization and mass transport in membrane electrode assemblies (MEAs), limiting their performance in polymer electrolyte membrane fuel cells. Here, we report a simple and universal approach to depositing sub-3-nm L10-PtM nanoparticles over external surfaces of carbon supports through pore-tailored amino (NH2)-modification, which enables not only excellent activity for the oxygen reduction reaction, but also enhanced Pt utilization and mass transport in MEAs. Using a low loading of 0.10 mgPt·cm−2, the MEA of PtCo/KB-NH2 delivered an excellent mass activity of 0.691 A·mgPt−1, a record-high power density of 0.96 W·cm−2 at 0.67 V, and only a 30-mV drop at 0.80 A·cm−2 after 30,000 voltage cycles, which meets nearly all targets set by the Department of Energy. This work provides an efficient strategy for designing advanced Pt-based electrocatalysts and realizing high-power fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Achievements in Pt nanoalloy oxygen reduction reaction catalysts: strain engineering, stability and atom utilization efficiency10.1039/D1CC05534H ↗
2. Achievements, challenges and perspectives on cathode catalysts in proton exchange membrane fuel cells for transportation10.1038/s41929-019-0304-9 ↗
3. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
4. Recent advances in electrocatalysts for oxygen reduction reaction10.1021/acs.chemrev.5b00462 ↗
5. Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction10.1039/C4CS00484A ↗
6. Nanostructured Pt-alloy electrocatalysts for PEM fuel cell oxygen reduction reaction10.1039/b912552c ↗
7. Understanding catalytic activity trends in the oxygen reduction reaction10.1021/acs.chemrev.7b00488 ↗
8. Changing the activity of electrocatalysts for oxygen reduction by tuning the surface electronic structure10.1002/anie.200504386 ↗
9. Alloys of platinum and early transition metals as oxygen reduction electrocatalysts10.1038/nchem.367 ↗
10. Lattice-strain control of the activity in dealloyed core-shell fuel cell catalysts10.1038/nchem.623 ↗
11. Understanding the electrocatalysis of oxygen reduction on platinum and its alloys10.1039/c2ee03590a ↗
12. Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell10.1016/j.jpowsour.2007.07.004 ↗
13. Stability of platinum based alloy cathode catalysts in PEM fuel cells10.1016/j.jpowsour.2005.05.011 ↗
14. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2008.06.006 ↗
15. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
16. Atomic arrangement engineering of metallic nanocrystals for energy-conversion electrocatalysis10.1016/j.joule.2019.03.014 ↗
17. Random alloyed versus intermetallic nanoparticles: a comparison of electrocatalytic performance10.1002/adma.201801563 ↗
18. New approach to fully ordered fct-FePt nanoparticles for much enhanced electrocatalysis in acid10.1021/acs.nanolett.5b00320 ↗
19. Hard-magnet L10-CoPt nanoparticles advance fuel cell catalysis10.1016/j.joule.2018.09.016 ↗
20. Fe Stabilization by intermetallic L10-FePt and Pt catalysis enhancement in L10-FePt/Pt nanoparticles for efficient oxygen reduction reaction in fuel cells10.1021/jacs.7b12829 ↗
21. Recent advances in nanostructured intermetallic electrocatalysts for renewable energy conversion reactions10.1039/D0TA01809K ↗
22. Conversion of PtNi alloy from disordered to ordered for enhanced activity and durability in methanol-tolerant oxygen reduction reactions10.1007/s12274-015-0784-0 ↗
23. Electrocatalysis on platinum nanoparticles: particle size effect on oxygen reduction reaction activity10.1021/nl2017459 ↗
24. Atomic-scale modeling of particle size effects for the oxygen reduction reaction on Pt10.1007/s10562-011-0637-8 ↗
25. Structurally ordered FePt nanoparticles and their enhanced catalysis for oxygen reduction reaction10.1021/ja1009629 ↗
26. Tuning the electrocatalytic oxygen reduction reaction activity of Pt-Co nanocrystals by cobalt concentration with atomic-scale understanding10.1021/acsami.9b06346 ↗
27. Tungsten-doped L10-PtCo ultrasmall nanoparticles as a high-performance fuel cell cathode10.1002/anie.201908824 ↗
28. Anisotropic strain tuning of L10 ternary nanoparticles for oxygen reduction10.1021/jacs.0c08962 ↗
29. Pt-Co@Pt octahedral nanocrystals: enhancing their activity and durability toward oxygen reduction with an intermetallic core and an ultrathin shell10.1021/jacs.1c04160 ↗
30. Ternary CoPtAu nanoparticles as a general catalyst for highly efficient electro-oxidation of liquid fuels10.1002/anie.201906137 ↗
31. Sub-6 nm fully ordered L10-Pt–Ni–Co nanoparticles enhance oxygen reduction via Co doping induced ferromagnetism enhancement and optimized surface strain10.1002/aenm.201803771 ↗
32. Biaxial strains mediated oxygen reduction electrocatalysis on fenton reaction resistant L10-PtZn fuel cell cathode10.1002/aenm.202000179 ↗
33. Sub-4 nm PtZn intermetallic nanoparticles for enhanced mass and specific activities in catalytic electrooxidation reaction10.1021/jacs.6b12780 ↗
34. Fine-grained and fully ordered intermetallic PtFe catalysts with largely enhanced catalytic activity and durability10.1039/C6EE01204C ↗
35. Direct synthesis of intermetallic platinum-alloy nanoparticles highly loaded on carbon supports for efficient electrocatalysis10.1021/jacs.0c05140 ↗
36. Highly stable and ordered intermetallic PtCo alloy catalyst supported on graphitized carbon containing Co@CN for oxygen reduction reaction10.1039/D0TA05182A ↗
37. Highly durable and active PtFe nanocatalyst for electrochemical oxygen reduction reaction10.1021/jacs.5b09653 ↗
38. Direct thermal annealing synthesis of ordered Pt alloy nanoparticles coated with a thin N-doped carbon shell for the oxygen reduction reaction10.1021/acscatal.1c02434 ↗
39. Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells10.1038/s41560-021-00824-7 ↗
40. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
41. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
42. Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells10.1038/s41563-019-0487-0 ↗
43. Understanding Pt nanoparticle anchoring on graphene supports through surface functionalization10.1021/acscatal.5b02722 ↗
44. Investigation of the interaction between nafion ionomer and surface functionalized carbon black using both ultrasmall angle X-ray scattering and Cryo-TEM10.1021/acsami.6b12949 ↗
45. The effect of carbon support surface functionalization on PEM fuel cell performance, durability, and ionomer coverage in the catalyst layer10.1149/1945-7111/ab7ea3 ↗
46. Improved oxygen reduction activity on Pt3Ni (111) via increased surface site availability10.1126/science.1135941 ↗
47. Facile Synthesis of highly faceted multioctahedral Pt nanocrystals through controlled overgrowth10.1021/nl802959b ↗
48. Structural effects in electrocatalysis: oxygen reduction on platinum low index single-crystal surfaces in perchloric acid solutions10.1016/0022-0728(94)03467-2 ↗
49. Size dependence of ordering in FePt nanoparticles10.1063/1.1643187 ↗
50. Unique electrochemical adsorption properties of Pt-skin surfaces10.1002/anie.201107668 ↗
51. Comparative study of the electrocatalytically active surface areas (ECSAs) of Pt alloy nanoparticles evaluated by Hupd and CO-stripping voltammetry10.1007/s12678-014-0205-2 ↗
52. Electrochemical methods of real surface area determination of noble metal electrodes–an overview10.20964/2016.06.71 ↗
53. Atomically dispersed single iron sites for promoting Pt and Pt3Co fuel cell catalysts: performance and durability improvements10.1039/D1EE01675J ↗
54. High-loaded sub-6 nm PtCo intermetallic compounds with highly efficient performance expression in PEMFCs10.1039/D1EE02530A ↗
55. Ordered Pt3Co intermetallic nanoparticles derived from metal-organic frameworks for oxygen reduction10.1021/acs.nanolett.8b00978 ↗
56. Mechanism of oxygen reduction reaction on Pt(111) in alkaline solution: importance of chemisorbed water on surface10.1021/acs.jpcc.6b05126 ↗
57. Oxygen reduction on well-defined core−shell nanocatalysts: particle size, facet, and Pt shell thickness effects10.1021/ja9067645 ↗
58. Effects of ink formulation on construction of catalyst layers for high-performance polymer electrolyte membrane fuel cells10.1021/acsami.1c06711 ↗
59. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs10.1016/j.apcatb.2004.06.021 ↗
60. Borup
61. Durability study of Pt3Ni1 catalysts as cathode in PEM fuel cells10.1016/j.elecom.2004.05.028 ↗
62. Heat treatment of carbon-based powders carrying platinum alloy catalysts for oxygen reduction: influence on corrosion resistance and particle size10.1016/S0378-7753(96)02425-1 ↗
63. PtCo/C cathode catalyst for improved durability in PEMFCs10.1016/j.jpowsour.2004.11.067 ↗
64. Enhanced Pt/C catalyst stability using p-benzensulfonic acid functionalized carbon blacks as catalyst supports10.1016/j.electacta.2013.01.097 ↗
65. Enhanced MEA performance for PEMFCs under low relative humidity and low oxygen content conditions via catalyst functionalization10.1149/2.0051707jes ↗
66. Three-dimensional spatial distributions of Pt catalyst nanoparticles on carbon substrates in polymer electrolyte fuel cells10.5796/electrochemistry.79.374 ↗
67. Zhang · 2011
68. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
69. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
70. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
71. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
72. Electrochemical dissolution of surface alloys in acids: thermodynamic trends from first-principles calculations10.1016/j.electacta.2007.02.082 ↗