journal article·2005-02

Prediction of bond failure and deflection of carbon fiber-reinforced plastic reinforced concrete beams

A. Maji, A. L. Orozco

Experimental Mechanics· Volume 45· Issue 1
Publisher page

Abstract

Carbon fiber-reinforced plastic (CFRP) reinforced concrete beams can fail due to interface debonding, due to the high tensile strength of such rebars. A set of 16 concrete beams reinforced with different amounts of CFRP reinforcement was subject to static three-point bending. The beam dimensions and CFRP reinforcements used were selected to demonstrate a transition from compression failure to bond failure with decreasing reinforcement ratio. It is shown that accurate bond strength data to predict such failures can be obtained from a “hinged-beam” test configuration, rather than the conventional direct “pull-out” tests. Deflection under service loads can also be predicted more accurately using a proposed equation that includes the reinforcement ratio and the elastic modulus of the reinforcement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. American Concrete Institute, “Guide for the Design and Construction of Concrete Reinforced with FRP Bars,” ACI 440. IR0-03 (2003).
2. Faza, S. and GangaRao, H.V.S., “Bending and Bond Behavior of Concrete Beams Reinforced with Fiber-reinforced Plastic Rebars,” WVDOH-RP-83 Phase I Report, West Virginia University, 128–173 (1992).
3. Focacci, F., Nanni, A., andBakis, C. E., Local Bond-slip Relationship for FRP Reinforcement in Concrete,”Journal of Composites for Contruction. ASCE.4(1),24–31 (2000).10.1061/(ASCE)1090-0268(2000)4:1(24) ↗
4. Cosenza, E., Manfredi, G., and Realfonzo, R., “Analytical Modeling of Bond between FRP Reinforcing Bars and Concrete,” Non-metallic (FRP) Reinforcement for Concrete Structures, RILEM, 164–172 (1995).
5. Freimanis, A.J., Bakis, C.E., Nanni, A., and Gremel, D., “A Comparison of Pull-out and Tensile Behaviors of FRP Reinforcement for Concrete,” Proceedings of the 2nd International Conference on Composites in Infrastructure, Tuscon, AZ, 52–65 (1998).
6. Kanakubo, T., Yonemaru, K., Fukuyama, H., Fujisawa, M., and Sonobe, Y., “Bond Performance of Concrete Members Reinforced with FRP Bars,” Proceedings of the International Symposium on Fiber-reinforced Plastic Reinforcement for Concrete Structures, Vancouver, Canada, ACI SP-138, 767–788 (1993).
7. Faza, S.S. and GangaRao, H.V.S., “Theoretical and Experimental Correlation of Behavior of Concrete Beams Reinforced with Plastic Rebars,” Proceedings of the International Symposium on Fiber-reinforced Plastic Reinforcement for Concrete Structures, Vancouver, Canada, ACI SP-138, 599–614 (1993).
8. Sakai, T., Kanakubo, T., Yonemaru, K., and Fukuyama, H., “Bond Splitting Behavior of Continuous Fiber Reinforced Concrete Members,” Proceedings of the International Symposium on Fiber-reinforced Polymer for Reinforced Concrete Structures, Baltimore, MD, ACI SP-188, 1131–1144 (1999).
9. Makitani, E., Irisawa, I., and Nishiura, N., “Investigation of Bond in Concrete Member with Fiber Reinforced Plastic Rebars,” Proceedings of the International Symposium on Fiber-reinforced Plastic Reinforcement for Concrete Structures, Vancouver, Canada, ACI SP-138, 315–331 (1993).
10. American Concrete Institute (ACI), “Building Code Requirements for Reinforced Concrete and Commentary,” ACI 318-99 (1999).
11. Nawy, E. G., andNeuwerth, G. E., “Fiberglass Reinforced Concrete Slabs and Beams,”Journal of the Structural Division, Proceedings of ASCE,103,421–440 (1977).10.1061/JSDEAG.0004559 ↗
12. Alsayed, S. H. andAlhozaimy, A. M., “Ductility of Concrete Beams Reinforced with FRP Bars and Steel Fibers,”Journal of Composite Materials,33 (19),1792–1806 (1999).10.1177/002199839903301902 ↗
13. Alkhrdaji, T., Mettemeyer, M., Nanni, A., and Belarbi, A., “Flexural Behavior of FRP Reinforced Concrete Members,” Center for Infrastructure Engineering Studies. University of Missouri-Rolla. CIES 99-15, http://www.rb2c.umr.edu/projects/reports/FRP-RC-Flexural_Design-3pdf (1999).
14. Nanni, A., “Flexural Behavior and Design of Reinforced Concrete Using FRP Rods,”Journal of Structural Engineering, ASCE,119 (11),3344–3359 (1993).10.1061/(ASCE)0733-9445(1993)119:11(3344) ↗
15. GangaRao, H. andVijay, P.V., “Design of Concrete Members Reinforced with GFRP Bars,”Proceedings of the 3rd International Symposium on Non-metallic (FRP) Reinforcement for Concrete Structures (FRPCS-3), Japan Concrete Institute, Vol. 1, 143–150 (1997).
16. Mutsoyoshi, H., Uehara, K., andMachida, A., “Mechanical Properties and Design Method of Concrete Beams Reinforced with Carbon Fiber Reinforced Plastics,”Transactions of the Japan Concrete Institute, Japan Concrete Institute,12,231–238 (1990).
17. Gao, D., Benmokrane, B., andMasmoudi, R., “A Calculating Method of Flexural Properties of FRP Reinforced Concrete Beam. Part I: Crack Width and Deflection,”Technical Report, Department of Civil Engineering, University of Sherbrooke, Quebec, Canada, 24 pp (1998).
18. American Concrete Institute (ACI), “State-of-the-art Report on Fiber-reinforced Plastic Reinforcement for Concrete Structures,” ACI 440R-96, Manual of Concrete Practice (1996).
19. Nanni, A., and Faza, S., “Designing and Constructing with FRP Bars: An Emerging Technology,” Concrete International, November, 53–58 (2002).
20. Hognestad, E., Hansen, N. M., andMc Henry, D., “Concrete Stress Distribution in Ultimate Strength Design,”ACI Journal, Proceedings,52(4),455–479 (1955).
21. Russo, G., Zingone, G., andRomano, F., “Analytical Solution for Bond-slip of Reinforcing Bars in R. C. Joints”Journal of Structural Engineering, ASCE,116(2),336–355 (1990).10.1061/(ASCE)0733-9445(1990)116:2(336) ↗