Pre-notched dog bone small punch specimens for the estimation of fracture properties
Source abstract
Abstract
In recent years, the pre-notched or pre-cracked small punch test (P-SPT) has been successfully used to estimate the fracture properties of metallic materials for cases in which there is not sufficient material to identify these properties from standard tests, such as CT or SENB specimens. The P-SPT basically consists of deforming a pre-notched miniature specimen, whose edges are firmly gripped by a die, using a high strength punch. The novelty of this paper lies in the estimation of fracture properties using dog-bone-shaped specimens with different confinement levels. With these specimens, three confinement variations have been studied. The results obtained enable the establishment of a variation of fracture properties depending on the level of confinement of each miniature specimen and selection of the most appropriate confinement for this goal.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Small Punch Test evaluation of intergranular embrittlement of an alloy steel10.1016/0036-9748(83)90373-3 ↗
2. A review of the ESB small punch test data on various plant components with special emphasis on fractographic details10.1016/S1350-6307(01)00034-6 ↗
3. Effect of geometric factors and processing parameters on plastic damage of SUS304 stainless steel by small punch test10.1016/j.matdes.2012.05.029 ↗
4. Small-punch and TEM disk testing techniques and their application to characterization of radiation damage10.1007/BF01197651 ↗
5. Small punch tests to estimate the mechanical properties of steels for steam power plant: I. Mechanical strength10.1016/S0308-0161(98)00074-X ↗
6. Development of a further-miniaturized specimen of 3 mm diameter for tem disk small punch tests10.1016/0022-3115(87)90092-4 ↗
7. A study concerning material fracture toughness and some small punch test data for low alloy steels10.1016/j.engfailanal.2003.05.020 ↗
8. Determination of the fracture toughness by applying a structural integrity approach to pre-cracked Small Punch Test specimens10.1016/j.engfracmech.2010.09.004 ↗
9. Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens10.1016/j.engfailanal.2011.08.004 ↗
10. Evaluation of fracture toughness by notched small punch tests with Weibull stress method10.1016/j.matdes.2013.04.071 ↗
11. Identification of ductile damage and fracture parameters from the small punch test using neural networks10.1016/j.engfracmech.2005.10.007 ↗
12. Determination of the Gurson-Tvergaard damage model parameters for simulating small punch tests10.1111/j.1460-2695.2010.01481.x ↗
13. Damage modelling in small punch test specimens10.1016/j.tafmec.2016.09.002 ↗
14. Stress corrosion cracking and hydrogen embrittlement studies of austenitic and ferritic steels by small punch test10.1016/0022-3115(88)90409-6 ↗
15. Evaluation of stress corrosion cracking susceptibility of nanocrystallized stainless steel 304L welded joint by small punch test10.1016/j.matdes.2013.06.019 ↗
16. Determination of creep property of 1.25Cr0.5Mo pearlitic steels by small punch test10.1016/j.engfailanal.2012.10.004 ↗
17. Small punch creep in Fe28Al3Cr0.02Ce alloy10.1016/j.intermet.2004.04.043 ↗
18. CEN Workshop Agreement · 2007
19. The J-integral as a fracture criterion
20. Inicio de fisuración en probetas miniatura de punzonado10.6036/4107 ↗
21. Influence of biaxial pre-deformation on fracture properties using pre-notched small punch specimens10.1016/j.engfracmech.2014.10.001 ↗