The effects of stabilizing treatment on microstructure and corrosion resistance of 316Ti stainless steel
Source abstract
Abstract
Abstract 316Ti stainless steel (316Ti) is given a stabilizing treatment in order to improve the intergranular corrosion resistance and service life. The parameters of 316Ti heat treatment were optimized in this work. The microstructure and intergranular corrosion resistance of 316Ti has been characterized by means of double-loop electrochemical potentiokinetic reactivation (DL-EPR), optical microscope (OM) and scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS) analysis. The results show that the intergranular corrosion resistance increased with increasing aging temperature. Also, the titanium carbonitrides were formed in the substrate during the stabilizing treatment and the size increased with increasing aging time. Moreover, the relation of the amount of precipitated phases with intergranular corrosion resistance in 316Ti was established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Corrosion behaviour of stainless steel (AISI 321) in alcoholic-H2SO4 mixtures10.2320/matertrans1989.32.251 ↗
2. Corrosion behaviour of stainless steels in aqueous solutions of methanesulfonic acid10.1016/j.corsci.2010.04.001 ↗
3. Corrosion resistance of austenitic steels and alloys in high temperature water10.1016/S0022-3115(96)00065-7 ↗
4. SCC susceptibility of type 316Ti stainless steel in supercritical water10.1016/j.jnucmat.2014.12.014 ↗
5. Corrosion mechanisms of candidate structural materials for supercritical water-cooled reactor10.1007/s11708-009-0024-y ↗
6. Stress corrosion cracking behavior of cold-drawn 316 austenitic stainless steels in simulated PWR environment10.1016/j.corsci.2016.08.014 ↗
7. Formation mechanism of titanium and niobium carbides in hardfacing alloy10.1007/s12598-016-0777-5 ↗
8. Microstructural stability of titanium-modified type 316 and type 321 stainless steel10.1007/BF03161827 ↗
9. Precipitation behavior of carbonitrides in type 347 stainless steels with various C and N contents10.1007/s11661-002-0080-y ↗
10. Influence of sigma phase on corrosion behavior of 316L stainless steel in high temperature and high pressure water10.1080/09603409.2016.1245470 ↗
11. Microstructure evolution of HP40-Nb alloys during aging under air at 1000 °C10.1016/j.matchar.2009.04.007 ↗
12. Formation of carbonitride precipitates in hardfacing alloy with niobium addition10.1007/s12598-013-0016-2 ↗
13. Influence of titanium addition on the microstructure of the novel ferrous-based stainless steel10.1016/j.jallcom.2011.03.174 ↗
14. Activation energies ratio as corrosion indicator for different heat treated stainless steels10.1016/j.matdes.2015.10.035 ↗
15. Effect of deformation-induced phase transformation on AISI 316 stainless steel corrosion resistance10.1016/j.engfailanal.2017.05.031 ↗
16. S. R · 2006
17. Effect of laser peening on electrochemical properties of titanium stabilized 321 steel10.1016/j.matchemphys.2017.02.022 ↗
18. The pitting corrosion resistance of microcrystalline coatings of sputtered 321 stainless steel10.5006/1.3585054 ↗
19. The double loop reactivation method for detecting sensitization in AISI 304 stainless steels10.5006/1.3581921 ↗
20. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering10.1016/S1359-6454(02)00064-2 ↗
21. Determination of susceptibility to intergranular corrosion and electrochemical reactivation behaviour of AISI 316L type stainless steel10.1016/j.corsci.2006.01.003 ↗
22. Development of precipitate size and volume fraction of niobium carbonitrides in stabilised stainless steel
23. Distribution of strong carbide forming elements in hard facing weld metal
24. Response of second phase particles in Ti-V-Nb microalloyed steel during weld thermal CyclesTi-V-Nb
25. Influence of Ti, C and N concentration on the intergranular corrosion behaviour of AISI 316Ti and 321 stainless steels10.1016/j.actamat.2006.11.021 ↗