Quantitative assessment of the hydrogen induced cracking for 2.25Cr-1Mo-0.25V steel under electrochemical charging conditions
Source abstract
Abstract
Abstract Hydrogen induced cracking (HIC) sensitivity of a vanadium-modified high strength steel at room temperature was studied by hydrogen concentration measurement, post-failure analysis, and interface characterization. It was found that the HIC sensitivity was relatively low as indicated by the small number of surface blisters and the random occurrence of internal cracks. This is partially attributed to the low hydrogen pressure in the defects, resulting from the high hydrogen solubility of the material. The immune inclusions with no cracks were identified after severe charging condition featuring more intact interface, indicating that the integrity of the interface and the size of voids may control the crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Effect of weld consumable conditioning on the diffusible hydrogen and subsequent residual stress and flexural strength of multipass welded P91 steels10.1007/s11663-018-1314-8 ↗
2. Microstructure and mechanical property relationship for different heat treatment and hydrogen level in multi-pass welded P91 steel joint10.1016/j.jmapro.2017.06.009 ↗
3. Some studies on P91 steel and their weldments10.1016/j.jallcom.2018.01.120 ↗
4. Diffusible hydrogen level in deposited metal and their effect on tensile properties and flexural strength of P91 steel10.1115/1.4035764 ↗
5. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application10.1016/j.jmapro.2020.08.019 ↗
6. Influence of hydrogen and annealing process on the microstructural evolution and fracture micromechanisms of medium Mn steel: An in-situ TEM investigation10.1016/j.ijhydene.2020.05.142 ↗
7. Evaluation of the influence of hydrogen on some commercial DP, Q&P and TWIP advanced high-strength steels during automobile service10.1016/j.engfailanal.2018.08.011 ↗
8. Failure investigation of hydrogen induced cracking of stabilator skin in jet aircraft10.1016/j.engfailanal.2018.05.019 ↗
9. Comprehensive study on hydrogen induced cracking of electrical resistance welded API X52 pipeline steel10.1016/j.ijhydene.2020.09.219 ↗
10. Hydrogen trapping sites and hydrogen-induced cracking in high strength quenching & partitioning (Q&P) treated steel10.1016/j.ijhydene.2014.06.079 ↗
11. Method for the quantitative assessment of transverse weld metal hydrogen cracking10.1016/j.matchar.2007.08.015 ↗
12. Study on hydrogen-assisted cracking in high-strength steels by using the granjon implant test10.1007/s13632-017-0351-z ↗
13. Hydrogen induced cold cracking of creep resistant ferritic P91 steel for different diffusible hydrogen levels in deposited metal10.1016/j.ijhydene.2016.07.202 ↗
14. Hydrogen induced fast-fracture10.1016/j.jmps.2019.103740 ↗
15. Effect of Nb on the hydrogen-induced cracking of high-strength low-alloy steel10.1016/j.corsci.2018.04.041 ↗
16. Crack and blister initiation and growth in purified iron due to hydrogen loading10.1016/j.actamat.2016.05.034 ↗
17. Suresh · 1998
18. Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced cracking10.1016/j.corsci.2010.12.011 ↗
19. Recent progress in microstructural hydrogen mapping in steels: quantification, kinetic analysis, and multi-scale characterisation10.1080/02670836.2017.1299276 ↗
20. Hydrogen diffusion and trapping process around MnS precipitates in αFe examined by tritium autoradiography10.1016/j.jallcom.2007.02.005 ↗
21. A general model for hydrogen trapping at the inclusion-matrix interface and its relation to crack initiation10.1080/14786435.2017.1378451 ↗
22. Chapter 5 – Mechanisms
23. Hydrogen trapping in AISI 4340 steel10.1179/030634583790420619 ↗
24. Spatially resolved localization and characterization of trapped hydrogen in zero to three dimensional defects inside ferritic steel10.1016/j.actamat.2017.10.066 ↗
25. Hydrogen-trapping mechanisms in nanostructured steels10.1007/s11661-013-1795-7 ↗
26. Origin of hydrogen trapping site in vanadium carbide precipitation strengthening steel10.1016/j.actamat.2018.05.003 ↗
27. Role of nonmetallic inclusions in hydrogen embrittlement of high-strength carbon steels with different microalloying10.1007/s11661-014-2447-2 ↗
28. Investigation of hydrogen attack in 2.25Cr-1Mo steels with a high-triaxiality void growth model10.1016/1359-6454(95)00203-0 ↗
29. The thermodynamics of decohesion10.1016/j.actamat.2003.11.007 ↗
30. Effect of high temperature deformation on the microstructure, mechanical properties and hydrogen embrittlement of 2.25Cr–1Mo-0.25 V steel10.1016/j.ijhydene.2017.07.237 ↗
31. Evaluation of repair welding procedures for 2.25 Cr–1Mo and 9Cr–1Mo steel welds10.1179/136217101101538587 ↗
32. Improved hydrogen embrittlement resistance after quenching–tempering treatment for a Cr-Mo-V high strength steel10.1016/j.ijhydene.2019.09.142 ↗
33. Hydrogen trap on the microstructure of Cr-Mo type steels10.4028/www.scientific.net/DDF.283-286.370 ↗
34. Influence of the decomposition behavior of retained austenite during tempering on the mechanical properties of 2.25Cr-1Mo-0.25 V steel10.1016/j.msea.2018.11.014 ↗
35. Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel10.1126/science.aal2418 ↗
36. Hydrogen diffusion and solubility in vanadium modified pressure vessel steels10.1016/0956-716X(92)90525-J ↗
37. Modelling hydrogen-induced cracking in steel using a coupled diffusion stress finite element analysis10.1016/S0308-0161(97)00019-7 ↗
38. A. SA542, Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum and Chromium-Molybdenum-Vanadium, ASME SA542, 2019.
39. Quantification of hydrogen diffusion and trapping in 2.25Cr-1Mo and 3Cr-1Mo-V steels with the electrochemical permeation technique and melt extractions10.1007/s11661-004-0253-y ↗
40. Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking10.1016/j.ijhydene.2009.09.090 ↗
41. Y. Tanaka, S. Aihara, S. Konosu, K. Hayashi, M. Yuga, H. Yamamoto, N. Ohtsuka, H. Mimura, Combined effect of temper and hydrogen embrittlement on impact properties of Cr-Mo steels, in: ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference, 2006, pp. 555–561.10.1115/PVP2006-ICPVT-11-93360 ↗
42. Effect of initial hydrogen distribution on the parameter extraction of the thermal desorption spectra: A finite element study10.1016/j.ijhydene.2020.06.214 ↗
43. Bulk diffusion-controlled thermal desorption spectroscopy with examples for hydrogen in iron10.1007/s11661-015-3236-2 ↗
44. Prevention of hydrogen embrittlement in steels10.2355/isijinternational.ISIJINT-2015-430 ↗
45. Role of inclusions in the pitting initiation of pipeline steel and the effect of electron irradiation in SEM10.1016/j.corsci.2017.10.029 ↗
46. Effect of calcium treatments and strain rate on reheat cracking of vanadium-modified 2.25 Cr-1Mo steel10.1016/S1044-5803(98)00017-5 ↗
47. Calcium modification of spinel inclusions in aluminum-killed steel: reaction steps10.1007/s11663-012-9660-4 ↗
48. Tm · 2016
49. Effect of deformation and charging conditions on crack and blister formation during electrochemical hydrogen charging10.1016/j.actamat.2017.01.013 ↗
50. Effect of microstructures and inclusions on hydrogen-induced cracking and blistering of A537 steel10.1016/j.msea.2015.06.085 ↗
51. Internal and surface damage of multiphase steels and pure iron after electrochemical hydrogen charging10.1016/j.corsci.2011.05.060 ↗
52. Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering10.1016/j.ijhydene.2016.04.114 ↗
53. Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters10.1016/j.ijhydene.2016.05.235 ↗
54. Electrochemical hydrogen charging to simulate hydrogen flaking in pressure vessel steels10.1016/j.engfracmech.2019.106546 ↗
55. Hydrogen embrittlement understood10.1007/s11661-015-2836-1 ↗
56. Numerical analysis of hydrogen transport near a blunting crack tip10.1016/0022-5096(89)90002-1 ↗
57. Modeling hydrogen transport by dislocations10.1016/j.jmps.2015.03.002 ↗
58. Hydrogen transport near a blunting crack tip10.1016/S0022-5096(98)00064-7 ↗
59. An effective finite element model for the prediction of hydrogen induced cracking in steel pipelines10.1016/j.ijhydene.2012.08.046 ↗
60. Experimental investigation of the effect of hydrogen on fracture toughness of 2.25 Cr-1Mo-0.25 V steel and welds after annealing10.3390/ma11040499 ↗
61. Hydrogen embrittlement understood10.1007/s11663-015-0325-y ↗
62. Study of the stability of α-Fe/MnS interfaces from first principles and experiment10.1016/j.apsusc.2019.144017 ↗
63. First principles calculation of interfacial stability, energy, and elemental diffusional stability of Fe (111)/Al2O3 (0001) interface10.1063/1.5123256 ↗