Failure analysis of an air-cooled heat exchanger in natural gas dehydration unit
Source abstract
Abstract
Abstract Corrosion and erosion can have a synergistic effect on failure related to heat exchangers in gas refineries. This work presents failure analysis of outlet piping of an air-cooled gas cooler in a natural gas refinery. Visual inspection as well as thickness measurements were employed to determine the severity of metal loss. Chemical composition analysis and hardness measurements were performed in order to make sure of authentication of base and weld metals. Metallographic investigation indicated that no metallurgical changes have been occurred. Assessment of service condition revealed that temperature drop of gas stream passing through the gas cooler resulted in water condensation followed by corrosion. On the other hand, calculations of critical velocity of fluid revealed that gas velocity exceeded the critical velocity which intensified the erosion and flow induced damages. Thus, it was concluded that although general CO2 corrosion plays a role on the metal loss, flow induced localized corrosion and erosion were the main causes of failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Erosion and Abrasive Machining · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. CO2 corrosion control in oil and gas production design
2. Engineering,
3. Santos · Natural gas dehydration by molecular sieve in offshore plants: Impact of increasing carbon dioxide content · 2017 · 149 · 760
4. Zirrahi · Prediction of water content of sour and acid gases · 2010 · 299 · 171
5. Papavinasam · 2013
6. El-Sherik · 2017
7. Principles and prevention of corrosion, Alpha Science
8. Kermani · Carbon dioxide corrosion in oil and gas production—a compendium · 2003 · 59 · 659
9. R. Botermans, P. Smith, Process Piping Design Handbook: Advanced Piping Design. Volume Two, Gulf Pub., 2008.
10. Failure Analysis of α-MDEA Air-Cooled Heat Exchanger of CO2 Removal Unit Based on the Semiquantitative Risk-Based Inspection
11. Esmaeili · Failure analysis of air cooler tubes in a gas refinery · 2017 · 6 · 191
12. A.B. Radwan, A.M. Abdullah, H.J. Roven, A.M. Mohamed, H. Sk, Failure analysis of 316L air cooler stainless steel tube in a natural gas production field, 10 (2015) 7606-7621.10.1016/S1452-3981(23)17375-5 ↗
13. Addepalli · Degradation study of heat exchangers · 2015 · 38 · 137
14. Design
15. Shah · 2003
16. Fujisawa · Critical consideration on wall thinning rate by liquid droplet impingement erosion · 2012 · 4 · 79
17. API, Washington DC, 14E: Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems (1991).
18. Engineering
19. Poulson · Complexities in predicting erosion corrosion · 1999 · 233 · 497
20. K. Efird, Disturbed flow and flow-accelerated corrosion in oil and gas production (1998).10.1115/1.2795013 ↗
21. A combined CFD-experimental method for developing an erosion equation for both gas-sand and liquid-sand flows
22. Revie · 2011
23. A. Gujba, L. Hackel, D. Kevorkov, M. Medraj, Water droplet erosion behaviour of Ti–6Al–4V and mechanisms of material damage at the early and advanced stages, 358 (2016) 109-122.10.1016/j.wear.2016.04.008 ↗