Failure analysis and performance of compact and slender carved stone walls under compression and seismic loading by the FEM approach
Source abstract
Abstract
Abstract Most of existing constructions were built of unreinforced masonry. The behavior of this material is governed by the physical and mechanical characteristics of the composite, self-weight and earthquake loading. The heterogeneity of masonry is also reflected in the anisotropic behavior of this material with different performance and failure under seismic forces. The capability of the applied model to simulate the nonlinear behavior of masonry and collapse modes on compact walls is validated through numerical examples under uniaxial compression, seismic loading and experimental results. The compact walls with solid section presented a poor performance with brittle failure. Conversely, the compact walls with window presented a more ductile performance by the redistribution of stresses. This combined failure by bending and shear stresses is also observed in two slender masonry towers with solid section and with one large window at belfry. Both towers did not present masonry crushing at ultimate conditions and it is not observed the failure by shear stresses at belfry because only one window is included in the FEM model of the tower. Other reported works on the same tower are used to compare the results by including more windows at belfry to induce a brittle failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Building code requirements for structural concrete and commentary
2. Collapse of the clock tower in Finale Emilia after the May 2012 Emilia Romagna earthquake sequence: numerical insight10.1016/j.engstruct.2014.04.026 ↗
3. Collapse analysis of the Clock and Fortified towers of Finale Emilia, Italy, after the 2012 Emilia Romagna seismic sequence: lesson learned and reconstruction hypotheses10.1016/j.conbuildmat.2016.03.220 ↗
4. The Tehuacan earthquake of June 15th, 1999 (in Spanish)
5. Guidelines for earthquake resistant non-engineered construction
6. Earthquake simulator tests on unreinforced masonry walls before and after upgrading with composites
7. Implementation and validation of a total displacement non-linear homogenization approach for in-plane loaded masonry10.1016/j.compstruc.2016.08.001 ↗
8. Numerical assessment of the static and seismic behaviour of the basilica of Santa Maria all'Impruneta (Italy)10.1016/j.conbuildmat.2010.12.028 ↗
9. Binda · 1992 · 11
10. Learning from failure: Long-term behaviour of heavy masonry structures
11. A constitutive model for masonry: Formulation and implementation for the analysis of complex structures (in Italian)
12. A micromechanical inelastic model for historical masonry10.1080/13632460609350605 ↗
13. In-plane strength of unreinforced masonry piers10.1002/eqe.860 ↗
14. A simplified homogenization-discrete element model for the nonlinear static analysis of masonry walls out-of-plane loaded10.1016/j.engstruct.2010.04.010 ↗
15. Seismic vulnerability assessment of a monumental masonry building10.1016/j.engstruct.2017.01.035 ↗
16. Curti · 2008
17. Static cyclic response of masonry walls retrofitted with fiber reinforced polymers
18. EERI · 2011
19. Eurocode 2 · 2004
20. FEMA-274 · 1997
21. “Damage models for the seismic response of brick masonry shear walls.” part I and II10.1002/(SICI)1096-9845(199704)26:4<441::AID-EQE651>3.0.CO;2-0 ↗
22. Ambient vibration testing of historic masonry towers for structural identification and damage assessment10.1016/j.conbuildmat.2006.01.007 ↗
23. GES · 1993
24. Earthquake hazard and damage on traditional rural structures in Turkey10.5194/nhess-10-605-2010 ↗
25. Interface model applied to fracture of masonry structures10.1061/(ASCE)0733-9445(1994)120:1(63) ↗
26. Lourenço · 1996
27. Multisurface interface model for analysis of masonry structures10.1061/(ASCE)0733-9399(1997)123:7(660) ↗
28. Continuum model for masonry: Parameter estimation and validation10.1061/(ASCE)0733-9445(1998)124:6(642) ↗
29. Validation of analytical and continuum numerical methods for estimating the compressive strength of masonry10.1016/j.compstruc.2006.08.009 ↗
30. Monitoring medieval structures in Pavia
31. Meli · 1998
32. Simple lower bound limit analysis homogenization model for in- and out-of-plane loaded masonry walls10.1016/j.conbuildmat.2011.01.012 ↗
33. Simple homogenization model for the non-linear analysis of in-plane loaded masonry walls10.1016/j.compstruc.2011.05.004 ↗
34. Mistler · 2006
35. Experimental study of seismic behaviour of typical Iranian URM brick walls
36. Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional interfaces and limit analysis formulation10.1016/j.ijsolstr.2005.02.010 ↗
37. Three-dimensional limit analysis of rigid blocks assemblages. Part II: Load-path following solution procedure and validation10.1016/j.ijsolstr.2005.02.011 ↗
38. Non-linear static analysis of rigid block models for structural assessment of ancient masonry constructions10.1016/j.ijsolstr.2017.07.022 ↗
39. Ötes · 2006
40. Seismic assessment of bell towers of Mexican colonial churches
41. Description of inelastic behaviour of structural masonry10.1016/S0020-7683(03)00174-4 ↗
42. Preciado · 2011
43. Performance of the Christchurch, New Zealand Cathedral during the M7.1 2010 Canterbury earthquake.
44. Seismic vulnerability and failure modes simulation of ancient masonry towers by validated virtual finite element models10.1016/j.engfailanal.2015.07.030 ↗
45. Façade seismic failure simulation of an old Cathedral in Colima, Mexico by 3D Limit Analysis and Nonlinear Finite Element Method10.1016/j.engfailanal.2014.12.003 ↗
46. Seismic vulnerability enhancement of medieval and masonry bell towers externally prestressed with unbonded smart tendons10.1016/j.engstruct.2016.05.007 ↗
47. Preciado · 2017
48. Nonlinear earthquake capacity of slender old masonry structures prestressed with steel, FRP and NiTi SMA tendons
49. Deformation controlled tests in masonry shear walls (in Dutch)
50. Structural masonry: An experimental/numerical basis for practical design rules
51. Evaluation of different approaches for the estimation of the seismic vulnerability of masonry towers10.1007/s10518-017-0258-8 ↗
52. Schlegel · 2004
53. Sperbeck · 2009
54. Rocking confined masonry walls with hysteretic energy dissipators and shake-table validation
55. Urban · 2007
56. Seismic assessment of historical masonry towers by means of simplified approaches and standard FEM10.1016/j.conbuildmat.2016.01.025 ↗
57. Non-linear dynamic and static analyses on eight historical masonry towers in the North-East of Italy10.1016/j.engstruct.2016.02.004 ↗
58. Deformation controlled tension and compression tests in units, mortar and masonry (in Dutch)
59. Deformation controlled tests in masonry shear walls, Part 2 (in Dutch)