Failure analysis of nozzle clogging during Super304H stainless steel continuous casting production
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y. Sawaragi, S. Hirano, TS5c2 - The development of a new 18-8 austenitic stainless steel (0.lC-18Cr-9Ni-3Cu-Nb, N) with high elevated temperatures strength for fossil power boilers, in: M. Jono, T. Inoue (Eds.), Mech. Behav. Mater. VI, Pergamon, Oxford, 1992: pp. 589–594. doi: 10.1016/B978-0-08-037890-9.50491-9.10.1016/B978-0-08-037890-9.50491-9 ↗
2. History of power plants and progress in heat resistant steels10.2355/isijinternational.41.612 ↗
3. Effect of Cu content on aging precipitation behaviors of Cu-rich phase in Fe-Cr-Ni alloy10.1016/S1006-706X(10)60101-X ↗
4. The effect of surface finish on the scaling behavior of stainless steel in steam and supercritical water10.1007/s11085-013-9380-4 ↗
5. An experimental and thermodynamic study of non-metallic inclusions in high Si stainless steels regarding clogging during casting10.1002/srin.201300368 ↗
6. A transient nozzle clog formation and peeling model10.1007/s11663-022-02638-8 ↗
7. Attachment of liquid calcium aluminate inclusions on inner wall of submerged entry nozzle during continuous casting of calcium-treated steel10.2355/isijinternational.54.2813 ↗
8. Microstructures and formation of tundish clogging deposits in Ti-alloyed Al-killed steel10.1007/s11663-020-01903-y ↗
9. Clogging growth on the submerged entry nozzle during continuous casting of a Ca-treated and Al-killed resulfurized steel10.1007/s11663-023-02829-x ↗
10. dependence of the clogging possibility of the submerged entry nozzle during steel continuous casting process on the liquid fraction of non-metallic inclusions in the molten Al-killed Ca-treated steel10.3390/met10091205 ↗
11. Effect of interfacial reaction behaviour on the clogging of SEN in the continuous casting of bearing steel containing rare earth elements10.1016/j.jallcom.2019.04.010 ↗
12. Significance of non‐metallic inclusions for the clogging phenomenon in continuous casting of steel – a review10.1002/srin.202200086 ↗
13. Submerged entry nozzle clogging during continuous casting of Al-killed steel
14. Technology for production of austenite type clean stainless steel10.2355/isijinternational.46.1795 ↗
15. Post-mortem ladle shroud analysis from the casting of Al-killed steel: microstructures and origin of alumina clogging deposits10.1007/s11663-021-02189-4 ↗
16. Rapid identification of calcium aluminate inclusions in steels using cathodoluminescence analysis10.1007/s11663-018-1362-0 ↗
17. Analysis of the failure causes in the flattening test of 2205 duplex stainless steel seamless tubes10.1016/j.engfailanal.2024.108322 ↗
18. The formation mechanism of flaw detection in wind power gear steel10.1016/j.engfailanal.2025.109417 ↗
19. Defects as a root cause of fatigue failure of metallic components. II: Non-metallic inclusions10.1016/j.engfailanal.2019.01.054 ↗
20. Corrosion of nozzle refractories by liquid inclusion in high oxygen steels10.2355/isijinternational.52.1281 ↗
21. Interfacial reaction between Al2O3–SiO2–C refractory and Al/Ti-killed steels10.2355/isijinternational.54.827 ↗
22. Formation mechanism of large-sized CaO-SiO2-CaF2-Al2O3-MgO composite inclusions in super 304H stainless steel rods
23. Agglomeration and clustering of CaO-Al2O3-MgO leading to super large-size line-shape inclusions in high carbon chromium bearing steel10.1007/s11663-021-02387-0 ↗
24. A thermodynamic study on the inclusion formation in ferritic stainless steel melt10.2355/isijinternational.44.1134 ↗
25. Control of formation of spinel inclusion in type 304 stainless steel by slag composition10.2355/tetsutohagane.93.475 ↗
26. Formation mechanism of spinel-type inclusions in high-alloyed stainless steel melts10.1007/s11663-007-9066-x ↗
27. Formation and removal mechanism of SiO2-MnO-Al2O3 inclusions in Al-killed 42CrMo4 wind turbine bearing steel forgings
28. Characteristics of nozzle clogging and evolution of oxide inclusion for Al-killed Ti-stabilized 18Cr stainless steel10.1007/s11663-019-01708-8 ↗
29. A transient model for nozzle clogging10.1016/j.powtec.2018.01.053 ↗
30. Calculation accuracy and efficiency of a transient model for submerged entry nozzle clogging10.1007/s11663-019-01551-x ↗