journal article·2023-10Open access

A novel analytical procedure for fatigue strength assessment and lifetime estimation of AM metallic components

Sabrina Vantadori, Camilla Ronchei, Daniela Scorza, Andrea Zanichelli

Abstract

In the present paper, a novel analytical procedure for both fatigue strength assessment and lifetime estimation of Additively Manufactured (AM) metallic components is proposed. More precisely, the procedure is able to take into account the intrinsic defects (generally characterising AM metals), which are responsible for a detrimental effect on fatigue limits. Such a procedure is based on the joint application of: (i) the Kitagawa-Takahashi diagram, for the fatigue limits calculation and (ii) the criterion of Carpinteri et al., for the fatigue strength assessment and lifetime estimation. In particular, such a diagram is formulated by alternatively exploiting the area parameter model and the modified El-Haddad model. The novel procedure is applied to some experimental data available in the literature related to AM AlSi10Mg specimens, subjected to cyclic axial and torsional loading. The theoretical results are compared with the experimental data, highlighting which of the above two formulations provides more accurate results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing10.1016/j.matdes.2019.108091 ↗
2. Ni. Sanaei, A. Fatemi, Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review, Prog. Mater. Sci. 117 (2021) 100724.10.1016/j.pmatsci.2020.100724 ↗
3. Pore defects in laser powder bed fusion: formation mechanism, control method, and perspectives10.1016/j.jallcom.2023.169215 ↗
4. Comparison on mechanical behavior and microstructural features between traditional and AM AISI 316L10.1111/ffe.13872 ↗
5. Structural integrity issues of additively manufactured railway components: progress and challenges10.1016/j.engfailanal.2023.107265 ↗
6. Parametric investigation of micro-pores coalescence in the microstructure of LPBF manufactured AISI 316 stainless steel under high cycle fatigue loading10.1016/j.engfailanal.2022.106942 ↗
7. Microstructural defects governing torsional fatigue failure of additively manufactured as-built and heat-treated Inconel 71810.1016/j.engfailanal.2022.106975 ↗
8. Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects10.1111/ffe.13000 ↗
9. Accelerated process optimization for laser-based additive manufacturing by leveraging similar prior studies10.1080/0740817X.2016.1189629 ↗
10. Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V10.1111/ffe.13361 ↗
11. Density-based optimization of the laser powder bed fusion process based on a modelling framework10.3390/alloys2010004 ↗
12. Data driven method for predicting the effect of process parameters on the fatigue response of additive manufactured AlSi10Mg parts10.1016/j.ijfatigue.2023.107500 ↗
13. Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy10.3221/IGF-ESIS.53.26 ↗
14. Impact behavior of gravity cast AlSi10Mg alloy: Effect of hot isostatic pressing and innovative high pressure T6 heat treatment10.3221/IGF-ESIS.64.13 ↗
15. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
16. The effect of heat treatment on the room and high temperature mechanical properties of AlSi10Mg alloy fabricated by selective laser melting10.1016/j.jmrt.2023.02.086 ↗
17. Non-metallic inclusions in 17–4PH stainless steel parts produced by selective laser melting10.1016/j.matdes.2017.11.063 ↗
18. Tailoring the alloy composition for wire arc additive manufacturing utilizing metal-cored wires in the cold metal transfer process10.1016/j.matdes.2022.110453 ↗
19. A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2020.105584 ↗
20. The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2021.106317 ↗
21. Defect-Driven topology optimization for fatigue design of additive manufacturing structures: application on a real industrial aerospace component10.1016/j.engfailanal.2022.106737 ↗
22. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by additive manufacturing10.1016/j.prostr.2017.11.054 ↗
23. Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness10.1111/ffe.13077 ↗
24. Notch-defect interaction in additively manufactured Inconel 71810.1016/j.ijfatigue.2018.12.021 ↗
25. Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects10.1111/ffe.13300 ↗
26. A machine-learning fatigue life prediction approach of additively manufactured metals10.1016/j.engfracmech.2020.107508 ↗
27. The potency of defects on fatigue of additively manufactured metals10.1016/j.ijmecsci.2022.107185 ↗
28. H. Kitagawa, S. Takahashi, Applicability of fracture mechanics to very small cracks or the cracks in the early stage, in: Proceedings of 2nd International Conference on Mechanical Behaviour of Materials, Boston, MA, 1976, pp. 627–631.
29. Murakami · 2002
30. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
31. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
32. A new FE post-processor for probabilistic fatigue assessment in the presence of defects and its application to AM parts10.1016/j.ijfatigue.2019.04.008 ↗
33. A benchmark activity on the fatigue life assessment of AlSi10Mg components manufactured by L-PBF10.1016/j.matdes.2022.110713 ↗
34. Fatigue failure mechanisms for AlSi10Mg manufactured by L-PBF under axial and torsional loads: The role of defects and residual stresses10.1016/j.ijfatigue.2022.106903 ↗
35. Critical plane orientation influence on multiaxial high-cycle fatigue assessment10.1134/S1029959915040074 ↗
36. Crack initiation and life estimation for 316 and 430 stainless steel specimens by means of a critical plane approach10.1016/j.ijfatigue.2020.105677 ↗
37. Notch fatigue life estimation of Ti-6Al-4V10.1016/j.engfailanal.2020.105098 ↗
38. Fatigue behaviour assessment of ductile cast iron smooth specimens10.1016/j.ijfatigue.2021.106459 ↗
39. Modelling of fatigue thresholds for small cracks in a mild steel by “Strip-Yield” model10.1016/j.engfracmech.2009.04.015 ↗
40. Inclusion rating by statistics of extreme values and its application to fatigue strength prediction and quality control of materials10.6028/jres.099.032 ↗
41. Y. Murakami, S. Fukuda, T. Endo, Effect of Micro-hole on Fatigue Strength 1st Report, Effect of Micro-hole: Dia.: 40 / 50 / 80 / 100 & 200μm) on the Fatigue Strength of 0.13% and 0.46% Carbon Steels. Trans. Jpn. Soc. Mech. Eng. Series I 44 (1978) 4003-4013.10.1299/kikai1938.44.4003 ↗
42. Multiaxial high cycle fatigue threshold with small defects and cracks10.1016/j.engfracmech.2014.03.017 ↗
43. Fatigue crack propagation of short crack10.1115/1.3443647 ↗
44. SIF and threshold for small cracks at small notches under torsion10.1046/j.1460-2695.2000.00260.x ↗
45. ECKA Granules Germany GmbH. https://www.kymerainternational.com/ (accessed 15 May).
46. Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting10.1016/j.heliyon.2019.e01186 ↗
47. Effect of post-heat treatment on the corrosion behavior of AlSi10Mg alloy produced by additive manufacturing10.1007/s11837-018-3298-x ↗
48. Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting10.3221/IGF-ESIS.60.26 ↗