journal article·2020-11

Field investigation and structural analysis of wind-induced collapse of outdoor single-post billboards

Jiayi Wen, Qiang Xie

Publisher page

Abstract

Abstract Outdoor single-post billboards, which consist of a supporting steel column and two or three billboard panels, are widely used in public places. However, wind-induced collapse of these billboards has been frequently witnessed, which indicates that improvement to the current design would be worthwhile. To study the wind-induced collapse mechanism of single-post billboards, a field investigation and a dynamic simulation of billboards destroyed by the super-typhoon Mujigae were carried out. The results indicate that the current Chinese design standard might heavily underestimate the actual wind loads and dynamic responses. Moreover, two collapse modes were identified: an abrupt mode caused by fracture of the anchor bolts and a gradual mode caused by severe local buckling of the steel column. A further push-over analysis found that different design combinations of the steel column and the anchor bolts can lead to different collapse modes. Three types of design combinations were defined: elastic, acceptable and unacceptable designs. To avoid the abrupt collapse mode, either elastic or acceptable designs should be adopted in engineering practice. For the gradual collapse mode, local buckling resistance of billboards were evaluated based on the European Standard EN1993-1-6, which proved to be applicable for billboards through this evaluation. Moreover, some instructive suggestions were proposed for the design of single-post billboards.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wind and Air Flow Studies · Structural Response to Dynamic Loads · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Determining the crack acceptability in the welded joints of a wind loaded cylindrical steel shell structure10.1016/j.engfailanal.2018.04.032 ↗
2. CECS 148—2003, Technical specification for steel structures of outdoor advertisement facility, Architecture & Building Press, Beijing, China, 2003 (in Chinese).
3. Simiu · 1996
4. An investigation of the forces on flat plates normal to a turbulent flow10.1017/S0022112071000478 ↗
5. Wind loads on free-standing walls in turbulent boundary layers10.1016/0167-6105(94)90074-4 ↗
6. Wind loads on rectangular signboards and hoardings10.1016/S0167-6105(00)00068-4 ↗
7. Experimental study of wind loading of rectangular sign structures10.1016/j.jweia.2014.04.005 ↗
8. Wind tunnel evaluation of mean wind pressure on frame-type signboard10.1016/j.jweia.2006.01.006 ↗
9. AS/NZS 1170.0—2011, Structural design actions Part 2: wind actions, Standards Australia Limited & Standards New Zealand, Sydney & Wellington, 2011.
10. Wind tunnel model tests of large billboards10.1260/136943309787522650 ↗
11. Characteristic of wind pressure distribution on large single column supported billboards
12. Wind load characteristics of large billboard structures with two-plate and three-plate configurations
13. Wind load effect of single-column-supported two-plate billboard structures10.1016/j.jweia.2018.05.013 ↗
14. An · 2009
15. Dynamic of billboard thin plate10.1016/j.proeng.2012.07.094 ↗
16. Wind-induced vibration of UHV transmission tower line system10.1016/j.jweia.2017.10.011 ↗
17. 3D wind buckling analysis of long steel corrugated silos with vertical stiffeners10.1016/j.engfailanal.2018.03.031 ↗
18. M. Alonso-Martinez, J.M. Adam, F.P. Alvarez-Rabanal, J. J. del Coz Díaz, Wind turbine tower collapse due to flange failure: FEM and DOE analyses, Eng. Fail. Anal., 104 (2019) 932-949.10.1016/j.engfailanal.2019.06.045 ↗
19. Behavior of thin-walled circular hollow section tubes subjected to bending10.1016/j.tws.2013.08.014 ↗
20. ANSI/AISC 360-10, Specification for structural steel buildings, American Institute of Steel Construction, 2010.
21. SAA steel structures code, AS4100, Standards Association of Australia, 2012.
22. Engineering critical assessment of steel shell structure elements welded joints under high cycle fatigue10.1016/j.engfailanal.2020.104578 ↗
23. Instability of thin steel cylindrical shells under bending10.1016/j.tws.2018.12.043 ↗
24. Eurocode 3, Design of steel structures, Part 1–6: Strength and stability of shell structures, European Committee for Standardisation, 2007.
25. Shell buckling evaluation of thin-walled steel tanks filled at low liquid level according to current design codes
26. Numerical evaluation on shell buckling of empty thin-walled steel tanks under wind load according to current American and European design codes10.1016/j.tws.2015.07.007 ↗
27. Buckling of cylindrical open-topped steel tanks under wind load10.1016/j.tws.2014.02.010 ↗
28. Stress analysis of a steel structure comprising cylindrical shell with billboard tower
29. Department of Information Industry of Zhejiang Province, Path of historic typhoon, 2016 (accessed 16 October 2018). http://typhoon.zjwater.gov.cn/default.aspx.
30. China Meteorological Data Service Center, Imagery products derived from basic radar reflectivity, 2015 (accessed 22 October 2018). http://data.cma.cn/data/cdcdetail/dataCode/J.0012.0001P.html.
31. An exponential ductile continuum damage model for metals10.1007/BF00040369 ↗
32. GB 50017-2017, Standard for design of steel structures, China Building Industry Press, Beijing, China, 2017 (in Chinese).
33. Hu · 2017
34. JGJ 145-2015, Technical specification for post-installed fastenings in concrete structures, Architecture & Building Press, Beijing, China, 2015 (in Chinese).
35. Roberts · 1990
36. Assessment and retrofitting of an existing steel structure subjected to windinduced failure analysis10.1016/j.jobe.2019.01.005 ↗
37. Failure analysis of large-scale wind power structure under simulated typhoon
38. Artificial wind generation and structural response10.1061/(ASCE)0733-9445(1987)113:12(2382) ↗
39. GB 50009-2012, Load code for the design of building structures, China Building Industry Press, Beijing, China, 2012 (in Chinese).