The compressive behaviour of beech and birch at different moisture and temperature conditions along the grain
Source abstract
Abstract
As demand grows to replace petroleum-derived materials with more environmentally friendly materials, the use of wood in high-performance applications in the automotive industry has received increasing attention. Understanding the behaviour of wood during forming processes is an essential step towards its successful implementation in the automotive sector. This study accordingly investigates the compressive response and failure behaviour of two hardwood species (beech and birch) at different moisture and temperature levels. The experimental tests were conducted at 20, 60, 100 and 140 °C on samples with various moisture levels, ranging from completely dry to wet conditions. The stress–strain curves were analysed, and the failure modes were examined using visual observations and microscopic analyses. The results demonstrated that, when beech and birch were tested in standard laboratory conditions, the dominant mode of failure was the kink band, where the fibres buckled in an approximately sigmoidal shape. However, when the wet wood was tested at temperatures of 60 °C and above, the stress–strain curves showed long stress plateau region as well as strain hardening. We hypothesise that, at elevated moisture and temperature levels, the cell walls, promoted by the improved flexibility of the polymer network, start to fold, hence, the load stabilises or even slightly decreases. This corresponds to the plateau stage in the stress–strain curves of beech and birch. With further loading, the distance between the folds becomes rather small and compaction of the folds (or densification) apears to occur, corresponding to the observed strain–hardening stage. This hypothsis is supported by the concertina-like folds seen in the scanning electron microscope (SEM) graphs of post-tested specimens. Here, we present and discuss the effect of rays, as well as cell wall/lumen ratio, on the compression behaviour of wood, and the stability of the forming process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Classic projects: Hughes H-4 Hercules 'Spruce Goose', Engineering & Technology, 2012, pp. 112–113.10.1049/et.2012.0938 ↗
2. Falconer · 2013
3. Liquid ammonia-solvent combinations in wood plasticization - chemical treatments
4. H. Schneider, Flugzeug - Typenbuch 1939/40, Handbuch der deutschen Luftfahrt- und Zubehör- Industrie, Gondrom Verlag GmbH, 1988.
5. The Development of the bent-wood furniture industry 1869–1914
6. S. Veigel, U. Müller, Compound material on the basis of a wood veneer and method for producing such a compound material.
7. Kink band initiation and band broadening in clear wood under compressive loading10.1016/S0167-6636(96)00043-9 ↗
8. Axial compression strength of Norway spruce related to structural variability and lignin content10.1016/S1359-835X(02)00182-3 ↗
9. Compressive response and failure of balsa wood10.1016/j.ijsolstr.2007.07.003 ↗
10. Kink band formation in wood species under compressive loading10.1007/s11340-007-9098-9 ↗
11. Predictions of compressive strength and kink band orientation for wood species10.1016/j.mechmat.2009.11.015 ↗
12. Finite strain analysis of wood species under compressive failure due to kinking10.1016/j.ijsolstr.2011.09.024 ↗
13. Compressive failure of fiber composites10.1016/0022-5096(93)90068-Q ↗
14. Kink band formation and band broadening in fiber composites under compressive loading10.1016/0956-7151(95)00001-C ↗
15. On the compressive failure of fiber-reinforced composites10.1016/0020-7683(94)00157-R ↗
16. Failure mechanisms in thick composites under compressive loading10.1016/1359-8368(95)00010-0 ↗
17. Fundamental-aspects of wood deformation pertaining to manufacture of wood-based composites
18. N. Morsing, Densification of Wood. The influence of hygrothermal treatment on compression of beech perpendicular to gain, in: Department of Structural Engineering and Materials, Technical University of Denmark, 2000.
19. W.E. Hillis, A.N. Rozsa, The softening temperatures of wood, 32(2) (1978) 68–73.10.1515/hfsg.1978.32.2.68 ↗
20. Viscoelastic properties of wood in swelling systems10.1007/BF00366501 ↗
21. Softening temperature of moist wood measured by differential scanning calorimetry10.1515/hfsg.1990.44.3.223 ↗
22. Fundamentals of flakeboard manufacture - viscoelastic behavior of the wood component
23. The effect of the relaxation time on the mechanical properties of longitudinally compressed wood
24. ISO 554 - Standard Atmospheres for Conditioning and/or Testing – Specifications, 1976.
25. Compressive strength of beech and birch at different moisture contents and temperatures10.1007/s10853-023-08882-w ↗
26. ISO 13061-2 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests, International Organization for Standardization, 2014.
27. Softening characteristics of wet wood under quasi static loading10.1515/HF.2000.094 ↗
28. Effect of moisture-content and temperature on the mechanical-properties of wood - an analysis of immediate effects
29. Characterisation of thermally treated beech and birch by means of quasi-static tests and ultrasonic waves10.1038/s41598-023-33054-w ↗
30. Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model10.1016/S0263-8223(00)00091-X ↗
31. Compressive strength of delaminated aerospace composites