Constitutive modeling of high-temperature deformation, fracture mechanisms, and metallurgical study of WAAM-Deposited Inconel 625 alloy

1. Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650 C10.1016/j.msea.2015.12.096 ↗

2. Effect of heat-treatment on microstructural evolution and mechanical behaviour of severely deformed Inconel 71810.1016/j.msea.2018.01.007 ↗

3. Kishor, Gaurav, Krishna Kishore Mugada, Raju Prasad Mahto, and Artem Okulov. “Assessment of microstructure development, defect formation, innovations, and challenges in wire arc based metal additive manufacturing.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): 14644207241302262.10.1177/14644207241302262 ↗

4. Caliari, Felipe Rocha, Kátia Cristiane Gandolpho Candioto, Antônio Augusto Couto, Carlos Ângelo Nunes, and Danieli Aparecida Pereira Reis. “Effect of double aging heat treatment on the short-term creep behavior of the inconel 718.” Journal of Materials Engineering and Performance 25 (2016): 2307-2317.10.1007/s11665-016-2051-2 ↗

5. Effect of Process Conditions on Mechanical and Metallurgical Properties of Wire Arc Additively Manufactured 316L Stainless Steel

6. Microstructural analyses of ATI 718Plus® produced by wire-ARC additive manufacturing process10.1007/s11661-017-4162-2 ↗

7. Microstructural characterization of a polycrystalline nickel-based superalloy processed via tungsten-intert-gas-shaped metal deposition10.1007/s11663-010-9410-4 ↗

8. Xiangfang Xu, and Stewart Williams. “Wire+ Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties.”10.1016/j.matdes.2019.108157 ↗

9. Influence of heat input on the formation of laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of inconel 71810.3390/met10060771 ↗

10. Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire+ arc additive manufacture process10.1016/j.jmatprotec.2018.10.023 ↗

11. Shaped metal deposition of a nickel alloy for aero engine applications10.1016/j.jmatprotec.2007.10.051 ↗

12. Effect of heat treatment on microstructure and mechanical properties of Inconel 625 alloy fabricated by pulsed plasma arc deposition10.1016/j.phpro.2013.11.010 ↗

13. Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer10.1016/j.matdes.2020.109031 ↗

14. Marchese, Giulio, Massimo Lorusso, Simone Parizia, Emilio Bassini, Ji-Won Lee, Flaviana Calignano, Diego Manfredi et al. “Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion.” Materials Science and Engineering: A 729 (2018): 64-75.10.1016/j.msea.2018.05.044 ↗

15. Aerospace, S. A. E. “Aerospace material specification: AMS 5662.” SAE International (2009).

16. Comprehensive and comparative heat treatment of additively manufactured Inconel 625 alloy and corresponding microstructures and mechanical properties10.3390/jmmp6050107 ↗

17. Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing10.1016/j.scriptamat.2016.10.035 ↗

18. Controlling the columnar-to-equiaxed transition during Directed Energy Deposition of Inconel 625

19. Isothermal and thermomechanical fatigue behavior of Inconel 718 superalloy10.1016/j.msea.2018.11.052 ↗

20. Determination of Johnson–Cook plasticity model parameters for Inconel71810.1007/s11665-017-2990-2 ↗

21. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗

22. Microstructure and mechanical properties of Wire Arc Additive Manufactured (WAAM) Inconel 718 parts via post heat treatments10.1016/j.matpr.2022.09.592 ↗

23. Xiao-Jie Zhou, and Yi Huang. “An enhanced Johnson–Cook model for hot compressed A356 aluminum alloy.”10.1002/adem.202000704 ↗

24. Effect of Crystallographic Texture and Grain Orientation on Tribological Properties of WAAM Deposited IN625 Alloy in Weaving Deposition Strategy

25. A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel10.1016/j.msea.2010.07.061 ↗

26. A modified Johnson-Cook model for 10% Cr steel at elevated temperatures and a wide range of strain rates10.1016/j.msea.2017.10.037 ↗

27. A comparative study on arrhenius and Johnson-cook constitutive models for high-temperature deformation of Ti2AlNb-based alloys10.3390/met9020123 ↗

28. Estimation of crystallite size, lattice strain and dislocation density of nanocrystalline carbonate substituted hydroxyapatite by X-ray peak variance analysis10.1016/j.mspro.2014.07.260 ↗

29. Fitzpatrick, Michael E., Antony Thomas Fry, Philip Holdway, F. A. Kandil, J. Shackleton, and L. Suominen. “Determination of residual stresses by X-ray diffraction.” (2005).

30. A critical investigation of the anisotropic behavior in the WAAM-fabricated structure10.1108/RPJ-01-2023-0005 ↗

31. Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies10.1016/j.jmatprotec.2018.08.031 ↗

32. Role of local recrystallization behavior on fatigue performance of SLMed 304L austenitic stainless steels10.1016/j.matchar.2021.111159 ↗

33. Grain refinement by dynamic recrystallization during laser direct energy deposition of 316L stainless steel under thermal cycles10.1016/j.jmapro.2022.01.057 ↗

34. Hirpa Gelgele Lemu, Yosef Wakjira Adugna, and Mesfin Demise Harsibo. “Residual stresses in wire arc additive manufacturing products and their measurement techniques: A systematic review.”10.3390/applmech5030025 ↗

35. In-situ EBSD study on the cube texture evolution in 3 wt% Si steel complemented by ex-situ EBSD experiment—from nucleation to grain growth10.1016/j.actamat.2018.11.054 ↗

36. Kishor, Gaurav, Krishna Kishore Mugada, Raju Prasad Mahto, Aravindan Sivanandam, Ravi Kumar Digavalli, and Murugaiyan Amirthalingam. “Microstructural evolution, crystallographic texture, grain morphology, and mechanical integrity of wire arc additively manufactured Inconel 625 alloy.” Materials Characterization 218 (2024): 114525.10.1016/j.matchar.2024.114525 ↗

37. Effect of equivalent heat input on WAAM Al-Si alloy10.1016/j.ijmecsci.2022.107831 ↗

38. Heat treatment effects on Inconel 625 components fabricated by wire+ arc additively manufacturing (WAAM)—part 2: mechanical properties10.1007/s00170-020-05980-w ↗

39. Sharma, Himanshu, Jonny Singla, Vikrant Singh, Jagtar Singh, Hitesh Kumar, Anuj Bansal, Anil Kumar Singla, Deepak Kumar Goyal, and Munish Kumar Gupta. “Influence of post heat treatment on metallurgical, mechanical, and corrosion analysis of wire arc additive manufactured inconel 625.” Journal of Materials Research and Technology 27 (2023): 5910-5923.10.1016/j.jmrt.2023.11.074 ↗

40. Effects of heat treatment on microstructures and properties of a heterostructured alloy with dissimilar components fabricated by WAAM10.1007/s12598-024-02854-y ↗

41. Cipriano Farias, Francisco Werley, Valdemar Rebelo Duarte, João da Cruz Payão Filho, Norbert Schell, Emad Maawad, Mélanie Bordas-Czaplicki, Fabio Machado Alves da Fonseca, Jonathan Cormier, Telmo Jorge Gomes dos Santos, and João Pedro Oliveira. “Arc-based directed energy deposited Inconel 718: role of heat treatments on high-temperature tensile behavior.” Materials Research Letters 12, no. 2 (2024): 97-107.10.1080/21663831.2023.2297734 ↗

42. Microstructure, mechanical and corrosion study of friction stir processed Inconel 625 additive layers deposited via wire arc direct energy deposition

43. Effect of heat treatment on microstructure and properties of additively manufactured aluminum bronze-steel bimetallic structures10.1016/j.matchar.2023.113462 ↗

44. Wu, Bintao, Zhijun Qiu, Bosheng Dong, Ondrej Muránsky, Hanliang Zhu, Zhiyang Wang, Zengxi Pan, and Huijun Li. “Microstructural characterisation and hardness assessment of wire arc cladded Hastelloy C276 on creep resistant steel P91.” journal of materials research and technology 19 (2022): 3818-3827.10.1016/j.jmrt.2022.06.129 ↗

45. Deposition Strategy on Microstructure Development and Mechanical Properties of Wire Arc Additively Manufactured Austenitic Stainless Steel

46. The effect of residual stresses on hardness measurements10.1007/BF02322494 ↗

47. The influence of alloy composition on residual stresses in heat treated aluminium alloys10.1016/j.matchar.2015.04.017 ↗

48. The effect of post-weld heat-treatment on mechanical-properties and residual-stresses mapping in welded structural steel10.1016/0924-0136(95)01794-1 ↗

49. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 71810.1016/S0921-5093(03)00079-0 ↗

50. Solute effects in grain boundary engineering10.1179/cmq.1995.34.3.165 ↗

51. Microcrack Nucleation and Propagation Investigation ofInconel 740H Alloy Under In SituHigh Temperature Tensile Test

52. Strengthening mechanisms in Inconel 718 superalloy10.1179/030634583790421032 ↗

53. Tensile deformation and fracture characteristics of delta-processed Inconel 718 alloy at elevated temperature10.1016/j.msea.2011.04.074 ↗

54. Tensile, creep behavior and microstructure evolution of an as-cast Ni-based K417G polycrystalline superalloy10.1016/j.jmst.2018.02.007 ↗

55. Ambient and high temperature in situ damage evolution in nickel based IN 718 super alloy10.1016/j.msea.2011.01.111 ↗

56. Mechanism of intermediate temperature embrittlement of Ni and Ni-based superalloys10.1080/10408436.2011.613492 ↗

57. In-situ high-temperature tensile testing of a polycrystalline nickel-based superalloy10.1080/09603409.2016.1180857 ↗

58. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy10.1016/j.msea.2016.10.095 ↗

59. Zhang, Tao, Huigui Li, Hai Gong, Yunxin Wu, Abdulrahaman Shuaibu Ahmad, and Xin Chen. “Effect of rolling force on tensile properties of additively manufactured Inconel 718 at ambient and elevated temperatures.” Journal of Alloys and Compounds 884 (2021): 161050.10.1016/j.jallcom.2021.161050 ↗

60. Studies on the evolution of annealing twins during recrystallization and grain growth in highly rolled pure nickel10.1016/j.msea.2014.11.023 ↗

61. Mechanical Anisotropy and Failure Analysis of Inconel 625 Parts Manufactured Using Wire and Arc Additive Manufacturing (WAAM)10.1007/s11668-024-01860-7 ↗

62. Grain refinement in wire-arc additive manufactured Inconel 82 alloy through controlled heat input10.1016/j.jallcom.2022.166949 ↗