journal article·2024-08

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Asif Mahmood, Chuanwen Sun, Wei Li, Gang Liu, Zhenduo Sun

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Fatigue and fracture mechanics · Titanium Alloys Microstructure and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Faceted crack induced failure behavior and micro-crack growth based strength evaluation of titanium alloys under very high cycle fatigue10.1016/j.ijfatigue.2019.105369 ↗
2. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
3. On the mechanism of fatigue failure in the superlong life regime (N> 107 cycles), part II: a fractographic investigation10.1046/j.1460-2695.2000.00343.x ↗
4. Nanograin layer formation at crack initiation zone for very-high-cycle fatigue of a Ti-6Al-4V alloy10.1111/ffe.12562 ↗
5. Effect of grain size on the very high cycle fatigue behavior and notch sensitivity of titanium10.1016/j.tafmec.2019.102362 ↗
6. Investigating environmental effects on small fatigue crack growth in Ti–6242S using combined ultrasonic fatigue and scanning electron microscopy10.1016/j.ijfatigue.2014.09.007 ↗
7. Effect of microstructure on ultra-high cycle fatigue behavior of Ti–6Al–4V10.1016/j.msea.2007.04.062 ↗
8. Gigacycle fatigue properties of Ti-6Al-4V alloy under tensile mean stress10.1016/j.msea.2014.01.019 ↗
9. Crack initiation mechanisms of Ti6Al4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.04.026 ↗
10. Very high cycle fatigue of TC4 titanium alloy under variable stress ratio: Failure mechanism and life prediction10.1016/j.ijfatigue.2017.08.004 ↗
11. Fatigue crack growth under corrosive environments of Ti-6Al-4V specimens produced by SLM10.1016/j.engfailanal.2020.104852 ↗
12. Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy10.1016/j.engfailanal.2020.104477 ↗
13. High cycle fatigue behaviour of Ti–6Al–4V alloy at elevated temperatures10.1016/j.scriptamat.2006.02.043 ↗
14. Fatigue failure mechanism of Ti60 titanium alloy in HCF and VHCF regime at different temperatures10.1016/j.engfailanal.2023.107393 ↗
15. A defect-based fatigue life estimation method for laser additive manufactured Ti-6Al-4V alloy at elevated temperature in very high cycle regime10.1016/j.ijfatigue.2022.107375 ↗
16. The effect of microstructure on very high cycle fatigue properties in Ti-6Al-4V10.1016/j.scriptamat.2010.02.043 ↗
17. Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM10.1016/j.engfailanal.2016.05.036 ↗
18. Effect of deposition strategies on fatigue crack growth behaviour of wire+ arc additive manufactured titanium alloy Ti–6Al–4V10.1016/j.msea.2021.141194 ↗
19. Mechanical study of crystalline orientation distribution in Ti-6Al-4V: An assessment of micro-texture induced load partitioning10.1016/j.matdes.2017.10.011 ↗
20. On the giga cycle fatigue behaviour of two-phase (2+) TiAl alloy10.1016/j.ijfatigue.2004.05.002 ↗
21. High layer thickness laser directed energy deposition of Ti6Al4V alloy: Microstructure, fatigue behavior and fractography
22. High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading10.1016/j.engfailanal.2023.107913 ↗
23. An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to very-high-cycle regime10.1016/j.ijfatigue.2022.107119 ↗
24. The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure10.1016/j.msea.2020.140110 ↗
25. Comparative study of very high cycle tensile and torsional fatigue in TC17 titanium alloy
26. On the effect of testing frequency on high and very high cycle fatigue behavior of AA2024-T3, Ti-6Al-4V, and Inconel 71810.1007/s11665-023-08385-4 ↗
27. Elevated-temperature gigacycle fatigue properties of nickel based superalloy: grain related cracking mechanism and life prediction modelling10.1016/j.engfracmech.2022.108254 ↗
28. Very high cycle fatigue behaviors of a turbine engine blade alloy at various stress ratios10.1016/j.ijfatigue.2016.11.032 ↗
29. Effect of stress ratio on very high cycle fatigue properties of Ti-10V-2Fe-3Al alloy with duplex microstructure10.1016/j.jmst.2017.11.036 ↗
30. Effects of stress ratio on high-cycle and very-high-cycle fatigue behavior of a Ti–6Al–4V alloy10.1016/j.msea.2014.09.115 ↗
31. Mean stress dependence of fatigue strength and subsurface crack initiation in Ti–15Mo–5Zr–3Al alloy10.1016/S0921-5093(99)00710-8 ↗
32. Effect of stress ratio on VHCF behavior for a compressor blade titanium alloy10.1016/j.ijfatigue.2016.05.004 ↗
33. Faceted crack initiation characteristics for high-cycle and very-high-cycle fatigue of a titanium alloy under different stress ratios10.1016/j.ijfatigue.2016.03.013 ↗
34. Effect of transformed β phase on fish-eye ductile crack initiation of a Ti-6Al-4V alloy in very high cycle fatigue regime10.1016/j.matlet.2020.129283 ↗
35. Characteristics and micromechanisms of fish-eye crack initiation of a Ti-6Al-4V alloy in very high cycle fatigue regime10.1016/j.jmrt.2022.10.125 ↗
36. Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime10.1016/j.ijmecsci.2021.106591 ↗
37. Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures10.1016/j.engfracmech.2007.05.015 ↗
38. Internal fatigue origins in α-β titanium allols10.1016/0001-6160(76)90147-4 ↗
39. Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
40. Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature10.1016/j.ijfatigue.2019.04.025 ↗
41. High-temperature failure mechanism and defect sensitivity of TC17 titanium alloy in high cycle fatigue10.1016/j.jmst.2022.01.010 ↗
42. Tensile and very high cycle fatigue behaviors of a compressor blade titanium alloy at room and high temperatures10.1016/j.msea.2021.141049 ↗
43. Creep-fatigue voids and subgrain boundaries assisted crack initiation for titanium alloy in VHCF regime with high mean stress at 40010.1016/j.msea.2022.143171 ↗
44. A simple model to predict the very high cycle fatigue resistance of Steels10.1016/j.ijfatigue.2010.12.010 ↗
45. A dislocation model for fatigue crack initiation10.1115/1.3157599 ↗
46. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength10.1016/S0142-1123(02)00037-3 ↗
47. Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure10.1016/S0921-5093(03)00135-7 ↗
48. The influence of the alpha grain size on internal fatigue crack initiation in drawn Ti-6Al-4V wires10.1016/j.prostr.2016.06.135 ↗
49. Microstructure evolution and mechanical property response of TC11 titanium alloy under electroshock treatment
50. Microstructure-based interior cracking mechanisms and life prediction of additively manufactured Ni-based superalloy with temperature effect10.1016/j.engfracmech.2023.109507 ↗
51. On the mechanism of very high cycle fatigue in Ti-6Al-4V10.1016/j.scriptamat.2008.08.012 ↗
52. Muhammad Imran Lashari, Multi-scale experimental investigation on microstructure related subsurface fatigue cracking behavior of selective-laser-melted superalloy at elevated temperature10.1016/j.matchar.2023.112960 ↗
53. High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition
54. Inhibition of cracking by grain boundary modification in a non-weldable nickel-based superalloy processed by laser powder bed fusion10.1016/j.msea.2020.139745 ↗
55. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
56. The effect of cubic-texture on fatigue cracking in a metastable β titanium alloy subjected to high-cycle fatigue
57. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
58. Analysis of deformation mechanisms operating under fatigue and dwell-fatigue loadings in an α/β titanium alloy10.1016/j.ijfatigue.2019.105341 ↗
59. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
60. Very high cycle fatigue of a nickel-based superalloy at room and elevated temperatures: interior failure behavior and life prediction10.1016/j.ijfatigue.2021.106349 ↗
61. Competing crack initiation behaviors of a laser additively manufactured nickel-based superalloy in high and very high cycle fatigue regimes10.1016/j.ijfatigue.2020.105580 ↗
62. Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime10.1016/j.ijfatigue.2020.105795 ↗
63. Prediction of threshold value for FGA formation10.1016/j.msea.2011.05.070 ↗
64. Effects of microstructural inhomogeneities and micro-defects on tensile and very high cycle fatigue behaviors of the friction stir welded ZK60 magnesium alloy joint10.1016/j.ijfatigue.2019.01.016 ↗
65. Subsurface crack nucleation and growth behavior and energy-based life prediction of a titanium alloy in high-cycle and very-high cycle regimes10.1016/j.engfracmech.2019.106705 ↗
66. Changes in fatigue life mechanism due to soft grains and hard particles10.1016/j.ijfatigue.2009.04.015 ↗
67. Microhardness measurements and the hall-petch relationship in an Al-Mg alloy with submicrometer grain size10.1016/1359-6454(96)00105-X ↗
68. Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature10.1016/j.ijfatigue.2021.106446 ↗
69. Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium10.1016/S1359-6454(01)00326-3 ↗
70. Effect of texture and slip mode on the anisotropy of plastic flow and flow softening during hot working of Ti-6Al-4V10.1007/s11661-001-0155-1 ↗
71. Fatigue life prediction of Ti60 titanium alloy under very high cycle loading at different temperatures10.1016/j.ijfatigue.2023.107838 ↗
72. Deformation heterogeneities and their role in life-limiting fatigue failures in a two-phase titanium alloy10.1016/j.actamat.2014.08.034 ↗
73. Subsurface faceted-cracking behavior of selective laser melting Ni-based superalloy under very high cycle fatigue10.1016/j.scriptamat.2020.11.001 ↗
74. A theory of fatigue crack initiation at inclusions10.1007/BF02642422 ↗
75. Application of minimum energy formalism in a multiple slip band model for fatigue. I. Calculation of slip band spacings10.1016/0956-7151(91)90078-F ↗
76. A microstructure-based fatigue-crack-initiation model10.1007/s11661-003-0207-9 ↗
77. Low cycle fatigue, fatigue crack propagation and substructures in a series of polycrystalline Cu-Al alloys10.1007/BF02642311 ↗
78. Fatigue life behavior of copper single crystals. Part II: Model for crack nucleation in persistent slip bands10.1111/j.1460-2695.1981.tb01131.x ↗
79. YK, Chang, Pan XN, Liang Zheng, Microstructure refinement and grain size distribution in crack initiation region of very-high-cycle fatigue regime for high-strength alloys, Int. J. Fatigue 134 (2020) 105473. Doi: 10.1016/j.ijfatigue.2020.105473.10.1016/j.ijfatigue.2020.105473 ↗
80. Statistical models for estimating the fatigue life, the stress–life relation, and the P‐S–N curves of metallic materials in Very High Cycle Fatigue: A review10.1111/ffe.13610 ↗
81. Competitive relationship during fatigue-crack initiation of friction-stir-welded Al alloy10.1016/j.msea.2021.141006 ↗
82. A two-parameter model to predict fatigue life of high-strength steels in a very high cycle fatigue regime10.1007/s10409-015-0451-4 ↗