An experimental investigation on the progressive failure of an additively manufactured Laser Powder Bed Fusion Ti-6Al-4V aero-engine bracket under Low Cycle Fatigue

1. Thin-walled structures methods and materials for additive manufacturing: A critical review on advancements and challenges10.1016/j.tws.2020.107228 ↗

2. A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2020.105584 ↗

3. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect10.1016/j.ijfatigue.2017.03.044 ↗

4. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance10.1016/j.ijfatigue.2012.11.011 ↗

5. Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗

6. The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures10.1016/j.matdes.2020.108708 ↗

7. T. Debroy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-heid, A. De, W. Zhang, Progress in Materials Science Additive manufacturing of metallic components – Process , structure and properties, 92 (2018) 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001.10.1016/j.pmatsci.2017.10.001 ↗

8. R. Molaei, A. Fatemi, N. Sanaei, J. Pegues, N. Shamsaei, S. Shao, P. Li, D.H. Warner, N. Phan, Fatigue of additive manufactured Ti-6Al-4V , Part II : The relationship between microstructure , material cyclic properties , and component performance Theory of Critical Distance, 132 (2020). https://doi.org/10.1016/j.ijfatigue.2019.105363.10.1016/j.ijfatigue.2019.105363 ↗

9. Effect of strain amplitude on low cycle fatigue and microstructure evolution in Ti-6Al-4V: A TKD and TEM characterization10.1016/j.matchar.2019.109829 ↗

10. Oxidation of Ti-6Al-4V alloy10.1016/j.jallcom.2008.04.024 ↗

11. Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗

12. Analysis of the effect of internal defects on fatigue performance of additive manufactured metals10.1016/j.msea.2020.139385 ↗

13. Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial and multiaxial non-proportional loading10.1016/j.ijfatigue.2019.05.003 ↗

14. Y.M. Ren, X. Lin, P.F. Guo, H.O. Yang, H. Tan, J. Chen, J. Li, Y.Y. Zhang, Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition : Experimental and prediction, 127 (2019) 58–73. https://doi.org/10.1016/j.ijfatigue.2019.05.035.10.1016/j.ijfatigue.2019.05.035 ↗

15. Cyclic softening of the Ti-10V-2Fe-3Al titanium alloy10.1016/S0921-5093(96)10531-1 ↗

16. Cyclic deformation response and micromechanisms of Ti alloy Ti-5Al-5V-5Mo-3Cr-0.5Fe10.1016/j.msea.2011.08.045 ↗

17. Isothermal and thermomechanical fatigue behaviour of Ti – 6Al – 4V titanium alloy10.1016/j.msea.2011.04.085 ↗

18. Cyclic softening behavior of Ti–6Al–4V alloy at macro and micro-scale10.1016/j.matlet.2016.08.119 ↗

19. Why aircraft fail10.1016/S1369-7021(02)01138-0 ↗

20. Z. Doubrovski, J.C. Verlinden, J.M.P. Geraedts, Optimal Design for Additive Manufacturing: Opportunities and Challenges, in: Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference/23rd International Conference on Design Theory and Methodology; 16th Design for Manufacturing and the Life Cycle Conference, 9 (2011) 635-646. https://doi.org/10.1115/DETC2011-48131.10.1115/DETC2011-48131 ↗

21. European Union Aviation Safety Agency: Certification Specifications and Acceptable Means of Compliance for Engines CS-E, Amendment 5, (2018).

22. Additive design and manufacturing of jet engine parts10.1016/J.ENG.2017.05.017 ↗

23. Numerical modeling and testing of mechanical behavior of AM Numerical modeling and testing of mechanical behavior AM of Titanium alloy bracket for aerospace applications

24. Structural components manufactured by Selective Laser Melting and Investment Casting—Impact of the process route on the damage mechanism under cyclic loading10.1016/j.jmatprotec.2017.04.026 ↗

25. Selective laser melting (SLM) and topology optimization for lighter aerospace componentes

26. Airbus approach for F&DT stress justification of Additive Manufacturing parts

27. ASTM B348/B348M – 19, Standard Specification for Titanium and Titanium Alloy Bars and Billets, ASTM International (2019) 1–9. https://doi.org/10.1520/B0348_B0348M-19.10.1520/B0348_B0348M-19 ↗

28. R.D.M. Nobre, D.L.R. Ju, Comparing Spherical and Irregularly Shaped Powders in Laser Powder Bed Fusion of Nb47Ti Alloy, 30 (2021) 6557–6567. https://doi.org/10.1007/s11665-021-05916-9.10.1007/s11665-021-05916-9 ↗

29. ASTM F2971-13, Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing, ASTM International (2013) 1-4. https://doi.org/10.1520/F2971-13.10.1520/F2971-13 ↗

30. ISO/ASTM 52921-13, Standard Terminology for Additive Manufacturing - Coordinate Systems and Test Methodologies. ASTM International, (2019) 1–14. https://doi.org/10.1520/ISOASTM52921-13R19.10.1520/ISOASTM52921-13R19 ↗

31. BS ISO 12106:2017, Metallic materials — Fatigue testing — Axial-strain controlled method, British Standard, BSI Standards Publication, ISBN 9780580902611 (2017).

32. Fatigue response of selective laser melted Ti-6Al-4V bracket: an experimental study

33. MMPDS-14, Metallic Materials Properties Development and Standardization, Federal Aviation Administration: Battelle Memorial Institute, Chapter 5 Titanium Alloys (2019) 57 -122.

34. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V10.1016/j.msea.2014.07.086 ↗

35. Y. Yang, Y.J. liu, J. Chen, H.L. Wang, Z.Q. Zhang, Y.J. Lu, S.Q. Wu, J.X. Lin, Crystallographic features of α variants and β phase for Ti-6Al-4V alloy fabricated by selective laser melting, Mater. Sci. Eng. A. 707 (2017) 548–558. https://doi.org/10.1016/j.msea.2017.09.068.10.1016/j.msea.2017.09.068 ↗

36. Deformation and failure mechanisms of Ti–6Al–4V as built by selective laser melting10.1016/j.msea.2019.138456 ↗

37. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy10.1016/j.actamat.2014.06.064 ↗

38. Cyclic plasticity and microstructure of as-built SLM Ti-6Al-4V: The effect of build orientation10.1016/j.msea.2017.06.069 ↗

39. Simulation of fatigue small crack growth in additive manufactured Ti–6Al–4V material10.1007/s00161-020-00878-0 ↗

40. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗

41. C.S. Related, Effect of microstructural morphology on the mechanical properties of titanium alloys, (2010). https://doi.org/10.1088/1742-6596/240/1/012022.10.1088/1742-6596/240/1/012022 ↗

42. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗

43. On the texture formation of selective laser melted Ti-6Al-4V10.1007/s11661-014-2218-0 ↗

44. Murakami · 2019

45. On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy10.1016/j.msea.2010.09.026 ↗

46. Hot dwell-fatigue behaviour of additively manufactured AlSi10Mg alloy : Relaxation, cyclic softening and fracture mechanisms10.1016/j.ijfatigue.2021.106408 ↗

47. Influence of bulk damage on crack initiation in low-cycle fatigue of 316 stainless steel10.1111/j.1460-2695.2009.01420.x ↗

48. Effect of heat treatment parameters on the microstructure and microhardness of Ti-6Al-4V alloy Effect of Heat treatment Parameters on The Microstructure and Microhardness of Ti-6Al-4V Alloy10.1063/1.4993335 ↗

49. Establishing specimen property to part performance relationships for laser beam powder bed fusion additive manufacturing10.1016/j.ijfatigue.2021.106384 ↗

50. An investigation into specimen property to part performance relationships for laser beam powder bed fusion additive manufacturing

51. The role of defects and characterisation of tensile behaviour of EBM additive manufactured Ti-6Al-4V : An experimental study at elevated temperature