Corrosion failure of titanium tubes of a heat exchanger for the heating of dissolving lye
Source abstract
Abstract
Abstract Corrosion of titanium heat exchangers in the processing of sylvinite ore is undesirable from economic, safety, and process sustainability perspectives. Triggered by an industrial case, we investigated the extent of corrosion during simulated contact with sylvinite ore (in dissolving lye) in relevant conditions. Detailed characterization of the failed tubes and corrosion products was carried out to understand the mechanism of failure. Corrosion of titanium (Grade 2) tubes was investigated at room temperature, 60, 70, 80, and 90 °C. After electrochemical and surface morphology analysis, we found that pitting corrosion of the titanium tube material sharply increased above 80 °C in the simulated sylvinite ore environment (pH 7.1). The failure analysis revealed extensive degradation by transgranular cracking through both the oxide and metal matrix, likely caused by a combination of the high temperature, pressure, possible vibrations, the build-up of lye deposits causing crevices, the high salt content of the lye, and possibly metal (copper, iron, zinc) impurities/deposits in or on the titanium metal, which can catalyze hydrogen evolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Boyer · 1994
2. Failure analysis of a titanium Coriolis mass flow meter: A case of hydrogen embrittlement10.1016/j.engfailanal.2020.104618 ↗
3. The influence of surface condition and environment on the hydriding of titanium10.5006/0010-9312-35.8.378 ↗
4. Effects of iron on the corrosion resistance of titanium
5. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part I: Corrosion and wear10.1016/j.engfailanal.2013.11.003 ↗
6. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part II: Erosion and cavitation corrosion10.1016/j.engfailanal.2013.11.002 ↗
7. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part I: Electrochemical corrosion10.1002/maco.201106189 ↗
8. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part II: Mechanical degradation10.1002/maco.201106190 ↗
9. Failure Analysis and Fatigue Investigation on Titanium Tubes in a Condenser10.1007/s11668-016-0171-5 ↗
10. Failure analysis and critical manufacturing technology research on titanium condensers10.1016/j.engfailanal.2004.10.005 ↗
11. Failure of titanium condenser tube10.1016/j.engfailanal.2011.05.008 ↗
12. Corrosion of titanium alloys in high temperature near anaerobic seawater10.1016/j.corsci.2015.12.011 ↗
13. Temperature dependence of crevice corrosion initiation on titanium grade-210.1149/1.1499501 ↗
14. Failure analysis of titanium heater tubes and stainless steel heat exchanger weld joints in nitric acid loop10.1016/j.engfailanal.2019.02.016 ↗
15. Roberts, T.L. (2008) Global Potassium Reserves and Potassium Fertilizer Use http://www.ipni.net/ipniweb/portal.nsf/0/9c5cff1af71db2ce852574e8004ecc00/%24FILE/Roberts%20-%20ASA%20Nutrient%20Cycling%20Symposium%20Potash.pdf.
16. https://kali.by/en/.
17. Inappropriate cleaning treatments of stainless steel AISI 316L caused a corrosion failure of a liquid transporter truck10.1016/j.engfailanal.2020.104938 ↗
18. Noel · 1999