journal article·2020-01

Analysis on the features and potential causes of wheel surface damage for heavy-haul locomotives

Kaikai Lyu, Kaiyun Wang, Pengfei Liu, Yu Sun, Zhiyong Shi, Liang Ling, Wanming Zhai

Publisher page

Abstract

Abstract With an aim of identifying the main causes of wheel surface damage occurred in heavy-haul locomotives, this paper presents the investigation on this intractable problem including field observed, site survey, and numerical simulation. The authors set out with a detailed description of the damage features and its propagation. By globally comparing the wheel states of four different types of locomotives and their running routes, the main causes of the surface damage are analysed, and further supplemented by the results of multi-body simulations and damage predictions. The influence of sand, liquid and braking modes on surface damage is also analysed. The results show that of all the three types of cracks commonly observed on wheels, only the cracks located between 65 and 90 mm from flange back propagate deeply. The types of bogies have great influence on wheel surface damage. In straight line operation, the braking forces will cause the transverse cracks near wheel centre, and the crack damage of wheels on locomotive with C0-C0 bogies is more severe than locomotive with 2(B0-B0) bogies, especially in large braking forces. In small curves, the transverse cracks occur on the outer wheels of the rear wheelsets for locomotive with C0-C0 bogies, and located on the band of 65–95 mm (mainly concentrated on 80 mm). While for locomotive with 2(B0-B0) bogies, the cracks occurred on the outer wheels of rear wheelsets concentrate on the position of 65 mm, while the cracks at this position have more chance to wear off. With the increase of curve radius, the crack damage of wheels decreased significantly, and its location moves to wheel centre correspondingly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Railway Engineering and Dynamics · Railway Systems and Energy Efficiency · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Analysis of the car body stability performance after coupler jack-knifing during braking10.1080/00423114.2017.1401099 ↗
2. The effect of the secondary lateral stopper on the compressed stability of the couplers and running safety of the locomotives10.1177/0954409717699040 ↗
3. Lateral impact derailment mechanisms, simulation and analysis10.1016/j.ijimpeng.2016.04.001 ↗
4. Dynamic response of the train–track–bridge system subjected to derailment impacts10.1080/00423114.2017.1398341 ↗
5. Wheel/rail rolling contact fatigue–probe, predict, prevent10.1016/j.wear.2013.12.004 ↗
6. Influence of wheel/rail tangential traction force on thermal cracking of railway wheels10.1016/j.wear.2012.04.008 ↗
7. Thermal cracking of railway wheels: Towards experimental validation10.1016/j.triboint.2015.09.042 ↗
8. Research into the problem of wheel tread spalling caused by wheelset longitudinal vibration10.1080/00423114.2015.1008015 ↗
9. The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks10.1115/1.3261717 ↗
10. Modelling and full-scale trials to investigate fluid pressurisation of rolling contact fatigue cracks10.1016/j.wear.2008.02.025 ↗
11. Investigating fluid penetration of rolling contact fatigue cracks in rails using a newly developed full-scale test facility10.1243/09544097JRRT63 ↗
12. A review of wheel wear and rolling contact fatigue10.1243/0954409JRRT72 ↗
13. Prediction of wheel profile wear and crack growth–comparisons with measurements10.1016/j.wear.2016.06.026 ↗
14. Prediction of RCF and wear evolution of iron-ore locomotive wheels
15. Investigation of the risk for rolling contact fatigue on wheels of different passenger trains10.1080/00423110801939188 ↗
16. Application of active steering systems for the reduction of rolling contact fatigue on rails10.1080/00423110600883702 ↗
17. Identifying the root causes of damage on the wheels of heavy haul locomotives and its mitigation10.1177/0954409714526165 ↗
18. Wheel surface damage: relating the position and angle of forces to the observed damage patterns10.1080/00423114.2012.665164 ↗
19. Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview10.1016/j.wear.2004.03.039 ↗
20. Fundamentals of vehicle–track coupled dynamics10.1080/00423110802621561 ↗
21. Establishment and verification of three-dimensional dynamic model for heavy-haul train–track coupled system10.1080/00423114.2016.1213862 ↗
22. An engineering model for prediction of rolling contact fatigue of railway wheels10.1046/j.1460-2695.2002.00535.x ↗
23. Tunna · 2007
24. Burstow · 2007
25. Wheel life prediction model–an alternative to the FASTSIM algorithm for RCF10.1080/00423114.2017.1403636 ↗