journal article·2010-07

Recent improvements and design formulae applied to front motorbike suspensions

D. Croccolo, M. De Agostinis, N. Vincenzi

Engineering Failure Analysis· Volume 17· Issue 5
Publisher page

Abstract

Abstract The aim of this paper is to provide a methodology useful for the structural design and optimization of front motorbike suspensions. Two different types of shaft–hub couplings are used to assembly the whole suspension: interference fit couplings and bolted joints. Some mathematical models and engineering design formulae are proposed in order to calculate the tensile state and the fundamental design parameters of the main couplings, such as, for example, the fork–steering shaft and the leg–wheel pin couplings. Both experimental tests (based on the Design of Experiment approach) and numerical analyses (based on the Finite Elements Method) have been carried out to obtain the proposed results. All the research findings culminate in an innovative software (Front Suspension Design©) which is useful to design and to verify the whole front motorbike suspension, by applying correct and effective results, obtained for different geometries and materials combinations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Engineering and Vibrations Research · Mechanical Failure Analysis and Simulation · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Cossalter · 2006
2. Kollmann · 1984
3. Timoshenko · 1959
4. A generalized theory for shaft–hub couplings10.1243/09544062JMES1437 ↗
5. Design of experiments
6. Montgomery · 2001
7. DIN 7190. Interference fit – calculation and design rules; 2001.
8. UNI EN ISO 4287. Geometrical product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters; 2002.
9. NF E22-620. Assemblage frettes sur portee cylindrique: fortion, realisation, calcul., AFNOR, Paris la defense. 1984.
10. Influence of roughness on characteristics of tight interference fit of a shaft and a hub10.1016/S0020-7683(01)00035-X ↗
11. Contact pressure between two rough surfaces of a cylindrical fit10.1016/S0924-0136(02)00139-5 ↗
12. The design and optimization of fork–pin compression coupling in front motorbike suspension10.1016/j.finel.2007.06.016 ↗
13. Modello matematico del coefficiente di attrito in accoppiamenti stabili
14. Friction coefficient definition in compression fit couplings applying the DOE method10.1111/j.1475-1305.2007.00363.x ↗
15. Niemann · 2005
16. A methodology to estimate the adhesive bonding defects and the final releasing moments in conical joints based on the acoustic emissions technique10.1016/j.ijadhadh.2005.06.011 ↗
17. Croccolo D, Vincenzi N. Stress concentration factors in compression fit couplings. Proc Inst Mech Eng C: J Mech Eng Sci, in press. doi:10.1243/09544062JMES1881.10.1243/09544062JMES1881 ↗
18. Croccolo D, Cuppini R, Vincenzi N. The adhesive residual stress of press fit and adhesively bonded cylindrical joints loaded with a tension tension fatigue cycle. In: Euradh 2008 – adhesion ‘08 tenth international conference on the science and technology of adhesion and adhesives–03/05, St. Catherine College, Oxford, UK, September 2008. pp. 277–81.
19. The effects of bonding clearance and interference fit on the strength of adhesively bonded cylindrical components10.1016/j.matdes.2004.05.016 ↗
20. Shear strength estimation of adhesively bonded cylindrical components under static loading using the genetic algorithm approach10.1016/j.ijadhadh.2004.11.002 ↗
21. Intrinsic static strength of friction interfaces augmented with anaerobic adhesives adhesively bonded cylindrical components under static loading using the genetic algorithm approach10.1016/S0143-7496(99)00062-7 ↗
22. Loctite worldwide design handbook; 1995.
23. Design improvement of clamped joints in front motorbike suspension based on FEM analysis10.1016/j.finel.2008.11.007 ↗
24. Beitz · 1997