journal article·2020-01

Experimental study on the influence of different carburized layer depth on gear contact fatigue strength

Wei Li, Shuang Deng, Bingshu Liu

Publisher page

Abstract

Abstract Contact fatigue is one of the main failure modes of gears. Gear contact fatigue reliability test is not only an important way to understand the gear capacity, but also the data foundation in product design. In this paper, the installation method of gear meshing staggered is used, and the two states of full tooth and staggered meshing are compared and analyzed by simulation software to verify the feasibility of the experimental design proposed in this paper. The gear contact fatigue test method combined with the up-down method and the grouping method is used to obtain test data with a minimum of sample gears. Under a certain degree of confidence interval, the logarithmic normal distribution is used to fit the C-R-S-N curve, and the fatigue limit stress of 20CrMnMo carburized gear under different reliability is obtained. The 20CrMnMo different carburized layer depth gears were tested. The results show that the carburized layer is not as thick as possible and has an optimum value. Too thick a layer depth usually causes deterioration of the surface layer structure or a decrease in residual stress, resulting in a decrease in contact fatigue limit. This provides basic test data for the finite life design and high reliability design of gear contact fatigue.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical stress and fatigue analysis · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Use of coefficients of influence to solve some inverse problems in plane elasticity
2. An elastic-plastic finite element model of rolling contact, Part 2: analysis of repeated contacts10.1115/1.3169030 ↗
3. Mathematical models of friction for contact problems in elasticity10.1016/0043-1648(86)90056-6 ↗
4. Development of contact mechanics
5. Comparison of spur, helical and curvilinear gear drives by means of stress and tooth contact analyses10.1007/s11012-016-0515-y ↗
6. Mathematical model and algorithm for contact stress analysis of gears with multi-pair contact10.1016/j.mechmachtheory.2014.12.005 ↗
7. Gear contact model and loaded tooth contact analysis of a three-dimensional, thin-rimmed gear10.1115/1.1485290 ↗
8. A finite-element-based study of the load distribution of a heavily loaded spur gear system with effects of transmission shafts and gear blanks
9. Error analysis on finite element modeling of involute spur gears10.1115/1.2114891 ↗
10. Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects10.1016/j.mechmachtheory.2016.11.014 ↗
11. Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth10.1016/j.engfailanal.2011.07.006 ↗
12. Dynamic simulation of planetary gear with tooth root crack in ring gear10.1016/j.engfailanal.2013.01.012 ↗
13. Influence of contact stress on rolling contact fatigue of composite ceramic coatings plasma sprayed on a steel roller10.1016/j.triboint.2013.12.019 ↗
14. Numerical investigation of contact stress between rotor and stator in a two-lead progressing cavity pump10.1016/j.petrol.2015.07.026 ↗
15. computational model for determination of service life ofgears10.1016/S0142-1123(02)00024-5 ↗
16. Bending fatigue and contact fatigue characteristics of carburized gears10.1016/0257-8972(94)01019-F ↗
17. Fracture mechanics and notch sensitivity10.1046/j.1460-2695.2003.00633.x ↗
18. Fatigue propagation threshold of short cracks under constant amplitude loading10.1016/S0142-1123(03)00065-3 ↗
19. On generating fatigue crack growth thresholds10.1016/S0142-1123(02)00066-X ↗
20. Fengji · 2009
21. Finite element simulation analysis of involute spur gear
22. Contact analysis of involute helical gear
23. A finite element analysis of the fatigue life of a toothed wheel based on a precise model
24. Computerized simulation of meshing of conventional helical involute gears and modification of geometry10.1016/S0094-114X(98)00013-5 ↗
25. Contact fatigue failure evaluation of post-tread WC-NiCrBSi function graded thermal sprayed coatings10.1016/j.wear.2004.05.008 ↗
26. Effects of plasma carburizing and DLC coating on friction-wear characteristics, mechanical properties and fatigue strength of stainless steel10.1016/j.msea.2012.08.011 ↗
27. The effect of hardness distribution by carburizing on the elastic–plastic contact performance10.1016/j.triboint.2015.11.004 ↗
28. Experimental analysis of contact fatigue damage in case hardened gears for off-highway axles10.1016/j.engfailanal.2017.01.019 ↗
29. Calculation of load capacity of spur and helical gears. ISO 6336.2006.
30. Cylindrical gears -- calculation of service life under variable loads -- conditions for cylindrical gears according to ISO 6336. ISO/TR 10495.1997.
31. Experimental investigation on the effect of shot peening on contact fatigue strength for carburized and quenched gears