Stress corrosion cracking failure analysis of AISI 1018 carbon steel reinforcing bars in carbonated and chloride contaminated environment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Evaluation of mechanical and structural behavior of austenitic and duplex stainless steel reinforcements10.1016/j.conbuildmat.2015.01.008 ↗
2. Corrosion failure analysis of low alloy steel and carbon steel rebar in tropical marine atmospheric environment: Outdoor exposure and indoor test10.1016/j.engfailanal.2021.105720 ↗
3. Electrochemical rehabilitation methods for reinforced concrete structures: Advantages and pitfalls10.1179/174327808X272423 ↗
4. K. Tuutti, Corrosion of steel in concrete. Doctoral Thesis. Division of building materials. Swedish Cement and Concrete Research Institute, Stockholm, 1982.
5. Evaluation of the mechanical behavior of 2001 LDSS and 2205 DSS reinforcements exposed to simultaneous load and corrosion in chloride contained concrete pore solution
6. Failure stages in post-tensioned reinforced self-consolidating concrete slab strengthened with CFRP layers10.1016/j.engfailanal.2021.105219 ↗
7. Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides10.1016/j.conbuildmat.2019.116899 ↗
8. A study on the corrosion of reinforcing bars in alkali-activated fly ash mortars under wet and dry exposures to chloride solutions10.1016/j.cemconres.2016.05.010 ↗
9. EN 206-1, Concrete - Part 1: Specification, performance, production and conformity, European Standard, 2021.
10. Bonding strength of stainless steel rebars in concretes exposed to marine environments10.1016/j.conbuildmat.2018.03.156 ↗
11. Crystallization pressure and volume variation during rust development in marine and urban-continental environments: Critical factors influencing exfoliation10.3989/revmetalm.164 ↗
12. Stress from crystallization of salt10.1016/j.cemconres.2003.12.034 ↗
13. Modeling steel corrosion failure in reinforced concrete by cover crack width 3D FEM analysis10.3389/fmats.2020.00041 ↗
14. Stress corrosion cracking of new 2001 lean–duplex stainless steel reinforcements in chloride contained concrete pore solution: An electrochemical study10.1016/j.conbuildmat.2018.10.108 ↗
15. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires10.1016/j.corsci.2017.12.014 ↗
16. Integrity assessment of corroded oil and gas pipelines using machine learning: A systematic review10.1016/j.engfailanal.2021.105810 ↗
17. The semiconductor properties of passive films and corrosion behavior of stainless steel reinforcing bars in simulated concrete pore solution10.1016/j.mtla.2019.100321 ↗
18. The effect of the steel–concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI10.1617/s11527-019-1387-0 ↗
19. Stress corrosion cracking (SCC) in low and medium strength carbon steels10.1533/9780857093769.3.169 ↗
20. Examination of rockbolt stress corrosion cracking utilising full size rockbolts in a controlled mine environment10.1016/j.ijrmms.2015.11.007 ↗
21. Initiation of stress corrosion cracking in cold-drawn prestressing steel in hardened cement mortar exposed to chlorides10.5006/3730 ↗
22. Influence of microstructure on strength and ductility in fully pearlitic steels10.3390/met6120318 ↗
23. Cleavage stress producing notch-induced anisotropic fracture and crack path deflection in cold drawn pearlitic steel10.3390/met11030451 ↗
24. Effect of pearlite on stress corrosion cracking of carbon steel in fuel-grade ethanol10.1515/corrrev-2017-0072 ↗
25. Stress corrosion cracking of mild and low alloy steels in CO-CO2-H2O environments10.5006/0010-9312-32.10.395 ↗
26. M. dos R. Tagliari, P. Craidy, D. Fonseca, M.F. Borges, Stress corrosion cracking of carbon steels on CO2/H2O systems, Tecnol. Metal. Mater. Min. 18 (2021) e2411. doi: 10.4322/2176-1523.20212411.10.4322/2176-1523.20212411 ↗
27. Stress corrosion cracking susceptibility of armour layers in CO2 annulus environments – SSRT experimental simulation10.1016/j.engfailanal.2022.106451 ↗
28. The stress corrosion cracking of C-Mn steel in CO2-HCO3−−CO32− solutions. II: Electrochemical and other data10.1016/S0010-938X(97)89248-7 ↗
29. Carbonate stress corrosion of the mains10.1007/BF02538522 ↗
30. ASTM E292, Standard test methods for conducting time-for-rupture notch tension tests of materials,ASTM International, West Conshohocken, PA, 2018. doi: 10.1520/E0292-18.10.1520/E0292-18 ↗
31. ISO 7539-6, Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement, International Organization for Standarization, Geneva, Switzerland (2018).
32. ASTM G129-21, Standard practice for slow strain rate testing to evaluate the susceptibility of metallic materials to environmentally assisted cracking, ASTM International, West Conshohocken, PA , 2021, doi: 10.1520/G0129-21.10.1520/G0129-21 ↗
33. Pre-strain enhances film rupture to promote SCC of brass in Mattsson’s solution – A proposal for a film-rupture-induced SCC mechanism10.1016/j.corsci.2012.11.043 ↗
34. Passivity breakdown and crack propagation mechanisms of lean duplex (UNS S32001) stainless steel reinforcement in high alkaline solution under stress corrosion cracking10.5006/4229 ↗
35. ASTM G59-97, Standard test method for conducting potentiodynamic polarization resistance measurements, ASTM International, West Conshohocken, PA, 2020, doi: 10.1520/G0059-97R20.10.1520/G0059-97R20 ↗
36. Evaluation of the DOS by DL−EPR of UNSM processed Inconel 71810.3390/met10020204 ↗
37. ASTM E915-96, Standard test method for verifying the alignment of X-ray diffraction instrumentation for residual stress measurement, ASTM International, West Conshohocken, PA , 1996, doi:10.1520/E0915-96.10.1520/E0915-96 ↗
38. Intergranular SCC mechanism of ultrasonic nanocrystalline surface modified AISI 304 SS in H2SO4 solution containing chloride10.1016/j.electacta.2021.139622 ↗
39. Investigation of surface residual stress profile on martensitic stainless steel weldment with X-ray diffraction10.1016/j.jksues.2016.01.004 ↗
40. Influence of thermomechanical treatments on corrosion of carbon steel in synthetic geopolymer fly ash pore solution10.3390/app11094054 ↗
41. Revised pourbaix diagrams for iron at 25–300 °C10.1016/S0010-938X(96)00067-4 ↗
42. M.L.S. Rivetti, J. da S.A. Neto, N.S. de A. Júnior, D.V. Ribeiro, H.-S. Lee, V. Saraswathy, S.-J. Kwon, S. Karthick, Corrosion inhibitors for reinforced concrete, in: Corros. Inhib. Princ. Recent Appl., InTech, 2018, doi: 10.5772/intechopen.72772.10.5772/intechopen.72772 ↗
43. Iron(III) hydrolysis and solubility at 25 °C10.1021/es070174h ↗
44. Hydrolisis products of iron (III)10.1002/j.1551-8833.1967.tb03485.x ↗
45. The effects of bicarbonate on the corrosion and passivation of iron10.5006/0010-9312-36.8.416 ↗
46. The comparison of pKa determination between carbonic acid and formic acid and its application to prediction of the hydration numbers10.1016/j.cplett.2008.05.074 ↗
47. CO2 corrosion of carbon steel - From mechanistic to empirical modelling10.1515/CORRREV.1997.15.1-2.211 ↗
48. Corrosion rate monitoring in the laboratory and on-site10.1016/0950-0618(95)00044-5 ↗
49. Stress corrosion cracking susceptibility index, ISCC, of austenitic stainless steels in constant strain-rate test
50. Effect of microstructure and mechanical properties on the stress corrosion cracking assessment of type 304 stainless steel using slow strain rate tests
51. Effect of solution treatment on stress corrosion cracking behavior of an as-forged Mg-Zn-Y-Zr alloy10.1038/srep29471 ↗
52. Stress corrosion cracking susceptibility of a high strength Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy10.1016/j.jma.2014.11.004 ↗
53. The role of residual stress in neutral pH stress corrosion cracking of pipeline steels. Part I: Pitting and cracking occurrence10.1016/j.actamat.2006.08.037 ↗
54. A coupled environment model for stress corrosion cracking in sensitized type 304 stainless steel in LWR environments10.1016/0010-938X(91)90063-U ↗
55. A stress corrosion cracking mechanism based on surface mobility10.1016/0010-938X(87)90117-X ↗
56. A generalized stress intensity factor to be applied to rounded V-shaped notches10.1016/j.ijsolstr.2005.03.007 ↗
57. Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates10.1016/S0020-7683(02)00342-6 ↗
58. The determination of KISCC of mild steel in hot caustic by using small circumferential notched tensile (CNT) fracture toughness specimens
59. Distinct advantages of circumferential notch tensile (CNT) testing in the determination of a threshold for stress corrosion cracking (KISCC)10.3390/ma14195620 ↗
60. Recent developments in the surface-mobility stress-corrosion-cracking mechanism10.1016/S0013-4686(00)00436-9 ↗
61. Wang, Zhao, Zhou, Determination of iron valence states around pits and the influence of Fe3+ on the pitting corrosion of 304 stainless steel10.3390/ma13030726 ↗
62. R.M. Katona, J. Carpenter, E.J. Schindelholz, R.G. Kelly, Prediction of maximum pit sizes in elevated chloride concentrations and temperatures, J. Electrochem. Soc. 166 (2019) C3364–C3375. doi: 10.1149/2.0451911jes.10.1149/2.0451911jes ↗
63. A review of the governing factors in pit-to-crack transitions of metallic structures10.5006/4179 ↗
64. Influence of carbon on stress corrosion cracking of high strength pipeline steel10.1016/j.corsci.2013.06.051 ↗
65. Effect of microstructure on corrosion of steels in aqueous solutions containing carbon dioxide10.5006/1.3284876 ↗
66. The influence of carbon steel microstructure on corrosion layers10.1016/S0169-4332(02)01218-7 ↗
67. Intergranular and transgranular stress corrosion cracking of carbon steel in fuel-grade ethanol10.1016/j.corsci.2015.03.002 ↗
68. Tensile fracture in carbon steels
69. Effects of corrosion product deposit on the subsequent cathodic and anodic reactions of X-70 steel in near-neutral pH solution10.1016/j.corsci.2008.08.026 ↗