Defect-Driven topology optimization for fatigue design of additive manufacturing structures: Application on a real industrial aerospace component
Source abstract
Abstract
In this paper, a generalized formulation of defect-driven topology optimization (TO) for fatigue design, named TopFat, is proposed, where the first principal stress, that causes the crack propagation, is limited in accordance with the defect size distribution of the additive manufacturing (AM) process. As the largest defect depends on the final volume of the component, which changes according to the topology, an iterative procedure is adopted to avoid volume constraints in the optimization problem. The procedure is applied to an actual aerospace bracket component and its strength and limitations are discussed in comparison with the TO formulations presented in the literature. Results show that considering the defect population significantly affects the final topology, while leading to a feasible optimum. Further, even though the computational time increases, an additional 15% of mass saving is achieved by adopting the proposed iterative procedure with respect to a volume constraint-based formulation of TopFat.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Topology Optimization in Engineering · Advanced Multi-Objective Optimization Algorithms · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
2. A review of metal additive manufacturing technologies10.4028/www.scientific.net/SSP.278.1 ↗
3. 2015
4. Review on design and structural optimisation in additive manufacturing: towards next-generation lightweight structures10.1016/j.matdes.2019.108164 ↗
5. A new methodology for thermostructural topology optimization: analytical definition and validation
6. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
7. Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review10.1016/j.matdes.2019.107950 ↗
8. Experimental and numerical investigation of a lattice structure for energy absorption: application to the design of an automotive crash absorber10.3390/polym14061116 ↗
9. M.P. Bendsøe, O. Sigmund, Topology optimization, second ed., Springer, 2002.
10. Topology optimization approaches: A comparative review10.1007/s00158-013-0978-6 ↗
11. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
12. Effect of microstructure, residual stresses and building orientation on the fatigue response up to 10^9 cycles of an SLM AlSi10Mg alloy10.1016/j.ijfatigue.2020.105659 ↗
13. On the fatigue properties of metals manufactured by selective laser melting - The role of ductility10.1557/jmr.2014.157 ↗
14. Fatigue lifetime assessment of AM metallic components according to a strain-based criterion10.1016/j.ijfatigue.2021.106674 ↗
15. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
16. Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
17. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
18. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
19. Fatigue of additively manufactured 316L stainless steel: the influence of porosity and surface roughness10.1111/ffe.13077 ↗
20. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by additive manufacturing10.1016/j.prostr.2017.11.054 ↗
21. Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
22. Quality control of AlSi10Mg produced by SLM: metallography versus CT scans for critical defect size assessment
23. Murakami · 2002
24. Inclusion rating by statistics of extreme values and its application to fatigue strength prediction and quality control of materials10.6028/jres.099.032 ↗
25. More than 25 years of extreme value statistics for defects: Fundamentals, historical developments, recent applications10.1016/j.ijfatigue.2021.106407 ↗
26. A new FE post-processor for probabilistic fatigue assessment in the presence of defects and its application to AM parts10.1016/j.ijfatigue.2019.04.008 ↗
27. Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm10.1016/j.ijfatigue.2021.106176 ↗
28. Defect-Driven Topology Optimisation: TopFat algorithm validation via 3D components re-design for real industrial applications10.1016/j.prostr.2022.03.075 ↗
29. Dominant factors for very-high-cycle fatigue of high-strength steels and a new design method for components10.1111/ffe.12331 ↗
30. S-N curves in the very-high-cycle fatigue regime: statistical modeling based on the hydrogen embrittlement consideration10.1111/ffe.12431 ↗
31. Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: a review10.1111/ffe.13610 ↗
32. M.C. Niu, Airframe Stress Analysis and Sizing, second ed., 1999, ISBN 978-9627128120.
33. AltairEngineering https://support.altair.com/csm?id=altair_product_documentation.
34. Surrogate modeling in design optimization of structures with discontinuous responses: a new approach for ill-posed problems in crashworthiness design10.1007/s00158-018-1958-7 ↗