Extrusion-occlusion dynamic failure analysis of O-ring based on floating bush of water hydraulic pump
Source abstract
Abstract
Abstract The sealing structure of the floating bush is used to connect the cylinder barrel and the valve plate and compensate for the inconsistency of the motion, which is caused by the offset of the cylinder barrel under the external load and the dynamic pressure of the water film. In the process of compensation, the alternative change of clearance size between closing ring and piston bush and the abrupt change of fluid pressure on O-ring make the O-ring extrude and occlude continuously, leading to seal failure and reduced service life. The sealing performance and service life of the O-ring directly affect the working performance of water hydraulic pump. Failure of the O-ring will lead to lower efficiency of water hydraulic pump. In this paper, the geometric relationship of the O-ring is obtained by analyzing the force and motion of cylinder barrel in offset state. Based on Mooney-Rivlin constitutive relation of the rubber material, a two-dimensional finite element model is established. The fluid pressure load and the swing load of the piston bush are applied. The dynamic equivalent stress and contact stress are analyzed, under the limit conditions of the O-ring assembly, loading fluid pressure and swing occlusion. The failure parts and causes are determined, which provides a theoretical basis for the optimization of the sealing structure of the floating bush.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydraulic and Pneumatic Systems · Mechanical Failure Analysis and Simulation · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate10.1016/j.cja.2013.07.044 ↗
2. A new design method for the transition region of the valve plate for an axial piston pump10.1631/jzus.A1400266 ↗
3. Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves: Analysis and optimization10.1007/s12206-016-0515-9 ↗
4. Experimental investigation on the noise reduction of an axial piston pump using free-layer damping material treatment10.1016/j.apacoust.2018.04.013 ↗
5. Load-compression relationships of rubber units10.1243/03093247V013190 ↗
6. Compression characteristics of laterally-unrestrained rubber O-rings
7. K. Yokoyama, M. Okazaki, T. Komito, Effect of contact pressure and thermal degradation on the sealability of O-ring, 1998.10.1016/S0389-4304(97)00070-2 ↗
8. Approximation of contact stress for a compressed and laterally one side restrained O-ring10.1016/j.engfailanal.2006.11.061 ↗
9. Evaluation of O-ring stresses subjected to vertical and one side lateral pressure by theoretical approximation comparing with photoelastic experimental results10.1016/j.engfailanal.2008.09.028 ↗
10. Simulation studies on drilling mud pump plunger seal failure under ultrahigh pressure and ultradeep conditions10.1016/j.engfailanal.2014.07.005 ↗
11. Analytical evaluation of the peak contact pressure in a rectangular elastomeric seal with rounded edges10.1177/0309324715612300 ↗
12. Static and dynamic sealing performance analysis of rubber D-ring based on FEM10.1007/s11668-016-0066-5 ↗
13. Sealing failure analysis on V-shaped sealing rings of an inserted sealing tool used for multistage fracturing processes10.3390/en11061432 ↗
14. Some forms of the strain energy function for rubber10.5254/1.3538343 ↗
15. M. Mooney, A theory of large elastic deformation, 1940.10.1063/1.1712836 ↗
16. D.J. Charlton, J. Yang, A review of methods to characterize rubber elastic behavior for use in finite element analysis, 1993.10.5254/1.3538686 ↗
17. ANSYS help documentation
18. Determination for material constants of rubber mooney-rivlin model
19. Evaluation of sealing performance of bearing rings of roller-cone bits based on grid-shaped bionic non-smooth surface10.1177/1687814018774187 ↗
20. Finite element analysis and simulation of the sealing performance of Y-ring rubber seal10.4028/www.scientific.net/AMM.444-445.1379 ↗