Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transition in predicting the lifetime of a tunnel-boring-machine cutter head
Source abstract
Abstract
Abstract The crack-growth lifetime of a tunnel-boring-machine (TBM) cutter head accounts for more than 80% of a TBM cutter head's entire lifetime. Considering the ultrathick plate of a TBM cutter head, a small-timescale crack-growth model is modified to predict crack-growth lifetime based on the plane stress/strain transition condition. An improved quasistatic method is proposed to calculate the dynamic stress of the weak points of the cutter head, which is used as the input load. A plastic constraint factor α is introduced to change the yield stress value of the material. The transition of the stress/strain state in the crack tip is simulated, and the modified model is verified by a fatigue crack-growth test of the characteristic substructure, giving better prediction results. Finally, this method is applied to predict the crack-growth lifetime of a TBM cutter head in the Water Diversion Project in Northwest Liaoning Province, China, and the results show that when the crack of the cutter head's vulnerable part grows from 0.1 mm to 60 mm in depth, the TBM's useful driving distance is about 11.2 km.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Advanced machining processes and optimization · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Hard rock TBM cutterhead modeling for design and performance prediction10.1002/geot.200800002 ↗
2. Damage form and countermeasures of hard rock TBM cutterhead in joint density area geology
3. Study of TBM cutterhead fatigue crack propagation life based on multi-degree of freedom coupling system dynamics10.1016/j.cie.2015.01.026 ↗
4. Fatigue life prediction based on an equivalent initial flaw size approach and a new normalized fatigue crack growth model10.1016/j.engfailanal.2016.04.003 ↗
5. A state-of-the-art review on fatigue life prediction methods for metal structures10.1007/s007730200012 ↗
6. Developing a full range S–N curve and estimating cumulative fatigue damage of steel elements10.1016/j.commatsci.2014.09.009 ↗
7. Backwards statistical inference method for P–S–N curve fitting with small-sample experiment dat10.1016/j.ijfatigue.2014.01.006 ↗
8. Evaluation of S–N curves with more than one failure mode10.1016/j.ijfatigue.2010.04.010 ↗
9. Estimating S–N curves and their scatter using a differential ant-stigmergy algorithm10.1016/j.ijfatigue.2012.02.015 ↗
10. Advanced notch strain based calculation of S–N curves for welded components10.1016/j.ijfatigue.2015.03.003 ↗
11. The service life of ball bearings
12. Cumulative damage in fatigue10.1115/1.4009458 ↗
13. Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials10.1016/S0142-1123(97)00081-9 ↗
14. Cumulative fatigue damage mechanisms and quantifying parameters: a literature review10.1520/JTE11978J ↗
15. A non-linear continous fatigue damage model10.1111/j.1460-2695.1988.tb01216.x ↗
16. Schijve · 2001
17. Rostami · 1997 · 249
18. Hard rock tunnel boring
19. Prognosis of advance rates and wear for underground mechanized excavations (in German)
20. Nelson · 1994
21. Forecasting penetration and wear for TBM drives in hard rock – results from the ABROCK research project10.1002/geot.201200040 ↗
22. Study of TBM cutterhead fatigue damage mechanisms based on a segmented comprehensive failure criterion10.1016/j.engfailanal.2015.08.041 ↗
23. Present and future of bus body frame dynamic stress study
24. Initial analysis on spatio temporal distribution and countermeasures of Liaoning drought
25. Modeling and vibration analysis of TBM mainframe under impact heavy loads
26. The multi-stage rock fragmentation load prediction model of tunnel boring machine cutter group based on dense core theory
27. Small time scale fatigue crack growth analysis10.1016/j.ijfatigue.2010.01.010 ↗
28. A simple analytical crack tip opening displacement approximation under random variable loadings10.1007/s10704-012-9682-6 ↗
29. Linear fracture mechanics: fracture translation and fracture control10.1016/0013-7944(68)90001-5 ↗
30. Crack closure and plastic zone size in fatigue10.1111/j.1460-2695.1991.tb00674.x ↗
31. Characterization of stable crack extension in aluminium sheet material using the crack tip opening angle determined optically and by the δ5 clip gauge technique10.1016/j.engfracmech.2008.04.009 ↗
32. Dynamic characteristics study with multidegree-of-freedom coupling in TBM cutterhead system based on complex factors