journal article·2013-12

Failure analysis of a PVC sewer pipeline by fractography and materials characterization

Scott J.F. Gould, Paul Davis, David J. Beale, David R. Marlow

Publisher page

Abstract

Abstract Sewer rising mains are an integral part of wastewater network and convey sewage under pressure between gravity fed systems or from gravity systems to treatment plants. The failure of a rising main can result in significant volumes of sewage being discharged to sensitive environments, significant clean-up costs and severe indirect consequences being incurred. This paper describes the analysis of an Unplasticised Polyvinyl Chloride (PVC-U) pressure sewer (sewer rising main), nominal diameter 200 mm, pressure class 12, that failed prematurely after 34 years of service considering the design life of >100 years. It was hypothesised that the root cause of pipe failure was either material degradation from exposure to an aggressive environment (the conveyed sewage) or an inherent defect in the pipe. To test this hypothesis, a thorough visual examination of the exhumed failed section and the fracture surface was undertaken, followed by Fourier Transform Infrared Spectroscopy, micro-scale examination of the fracture surface using Scanning Electron Microscopy and Energy Dispersive X-ray Spectrometry. Fourier Transform Infrared Spectroscopy showed no evidence of material degradation due to contact with sewage. Visual and micro-scale examination revealed that failure occurred in two major stages initiated at an inherent defect (foreign inclusion) in the pipe wall that was attributed to the original manufacture. In addition to the initiating defect in the pipe wall, numerous other potential stress risers were also identified. The application of an established crack growth model predicted pipe failure close to the observed lifetime. Application of the staged methodology presented is recommended to establish relationships between manufacturing eras of PVC pipes and severity of inherent defects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Water Systems and Optimization · Geotechnical Engineering and Underground Structures · Offshore Engineering and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Buckland P. The business case involving intangibles. In: ICOMS asset management conference. Gold Coast; 2011.
2. Marlow D. et al. Condition assessment strategies and protocols for water and wastewater utility assets. WERF; 2007.
3. A selection framework for infrastructure condition monitoring technologies in water and wastewater networks10.1016/j.eswa.2012.10.004 ↗
4. Plastics Industry Pipe Association of Australia Limited, POP101: PVC pressure pipes design for dynamic stresses. Chatswood, Australia; 2009.
5. Davis · 2007
6. Burn · 2005
7. The effect of photo-oxidative degradation on fracture in ABS pipe resins10.1016/j.polymdegradstab.2003.10.017 ↗
8. Pipe-soil interaction analysis of jointed water mains10.1139/t96-061 ↗
9. A physical probabilistic model to predict failure rates in buried PVC pipelines10.1016/j.ress.2006.08.001 ↗
10. Gaseous hydrogen sulfide determination by discoloration of lead-stabilized PVC10.1080/15298667991430541 ↗
11. Plastics Industry Pipe Association of Australia Limited, POP201: resistance of plastics pipes and fittings to water and wastewater chemicals, Chatswood, Australia; 2008.
12. Socrates G. Infrared and raman characteristic group frequencies: tables and charts. Wiley; 2004.
13. FTIR studies of PVC/PMMA blend based polymer electrolytes10.1016/j.saa.2006.06.012 ↗
14. Sawyer · 2008
15. Void formation in short-fiber thermoplastic composites10.1002/pc.750100609 ↗
16. Standards Australia · 2006
17. Wear of working members of extruders for processing polymers10.1007/BF02416718 ↗
18. Williams JG. Applications of linear fracture mechanics. Failure in Polymers, Berlin Heidelberg: Springer; 1978. p. 67–120.10.1007/3-540-08829-6_2 ↗
19. The optimisation of rubber modified poly(vinyl chloride) pipes for pressure applications
20. Burn · 1993
21. Davis P, Burn LS, Whittle AJ. Investigating crack growth and plasticity in the C ring fracture toughness test. In: Proceedings of the plastics pipes XI, München, Germany; 2001.