journal article·2013-04

Implications of the lead crack philosophy and the role of short cracks in combat aircraft

R. Jones, D. Tamboli

Publisher page

Abstract

Abstract The Australian Defence Science and Technology (DSTO)/Royal Australian Air Force (RAAF) approach to the management of fatigue cracking in combat and trainer aircraft makes use of the “lead crack” concept. In this approach crack growth is assumed to initiate from small naturally occurring defects/discontinuities with dimensions of approximately 10 μm and growth is assumed to commence from day one. As a result, for certification purposes, we need to address the so called short crack anomaly, whereby for a given Δ K the crack growth rate ( da / dN ) is significantly greater for short cracks than it is for long cracks. In this paper we reveal that there are several instances where this anomaly vanishes if da / dN is represented as a function of (Δ K − Δ K thr ), where Δ K thr can be thought of as an apparent threshold. We then show that for operational aircraft the “true” da / dN versus Δ K curve is an amalgam of the short and long crack growth curves. We next show that existing test procedures used to establish the effect of composite repairs to cracks in fleet aircraft overestimate their effect. We also show that the growth of cracks from small naturally occurring defects exhibits little, if any, R ratio effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Fatigue and fracture mechanics · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. The lead crack fatigue lifing framework10.1016/j.ijfatigue.2010.09.009 ↗
2. Schijve J. Fatigue life until small cracks in aircraft structures: durability and damage tolerance. Advanced structural integrity methods for airframe durability and damage tolerance. In: Harris CE, editors. Proceedings FAA/NASA international symposium, Hampton, 1994, NASA Conference Publication 3274; 1994. p. 665–81.
3. Closure mechanisms in Al–Si–Mg cast alloys and long-crack to small-crack corrections10.1016/j.ijfatigue.2005.06.013 ↗
4. Crack growth from small flaws10.1016/j.ijfatigue.2007.01.031 ↗
5. Molent L, Sun Q, Green AJ. The F/A-18 fatigue crack growth data compendium, DSTO-TR-1677, Melbourne, Australia; 2005.
6. A study of nucleation and fatigue behavior of an aerospace aluminum alloy 2024-T310.1016/j.ijfatigue.2004.06.010 ↗
7. Miedlar PC, Berens AP, Gunderson A, Gallagher JP. Analysis and support initiative for structural technology (ASIST), AFRL-VA-WP-TR-2003-3002.
8. An analysis of the growth of short fatigue cracks10.1016/0013-7944(91)90151-P ↗
9. On the behavior of small fatigue cracks in commercial aluminum–lithium alloys10.1016/0013-7944(88)90105-1 ↗
10. Experimental studies into short crack growth10.1016/j.engfailanal.2011.03.012 ↗
11. Forman RG, Shivakumar V, Cardinal JW, Williams LC, McKeighan PC. Fatigue crack growth data base for damage tolerance analysis. DOT/FAA/AR-05/15, Washington, USA; 2005.
12. Sharp PK, Byrnes R, Clark G. Examination of 7050 fatigue crack growth data and its effect on life prediction, DSTO-TN-0729, Australia; 1998.
13. Fatigue crack growth in a diverse range of materials10.1016/j.ijfatigue.2012.01.004 ↗
14. Fatigue crack propagation in steels10.1016/0013-7944(83)90070-X ↗
15. Application of the Hartman–Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites10.1016/j.compstruct.2011.11.030 ↗
16. Iyyer NS, Dowling NE. Fatigue growth and closure of short cracks. AFWAL-TR-89-3008; 1989.
17. Forth SC, James MA, Newman JA, Everett RA. Jr., Johnston WM. Jr. Mechanical data for use in damage tolerance analyses. NASA/TM-2004-213503 and ARL-TR-3375; 2004.
18. The effects of environment and load frequency on the crack propagation law for macro fatigue crack growth in aluminium alloys10.1016/0013-7944(70)90003-2 ↗
19. A quantitative analysis of structure sensitive fatigue crack growth in steels10.1016/0036-9748(84)90080-2 ↗
20. Analytical prediction of short to long fatigue crack growth rate using small- and large-scale yielding fracture mechanics10.1016/S0142-1123(03)00126-9 ↗
21. Fatigue crack growth model for constant amplitude loading10.1111/j.1460-2695.2004.00760.x ↗
22. A fracture model of corrosion fatigue crack propagation of aluminum alloys based on the material elements fracture ahead of a crack tip10.1016/j.ijfatigue.2007.10.007 ↗
23. Prediction of corrosion fatigue lives of aluminium alloy on the basis of corrosion pit growth law10.1111/j.1460-2695.2006.01018.x ↗
24. Improved test method for very low fatigue-crack-growth-rate data10.1111/j.1460-2695.2010.01516.x ↗
25. Effect of load ratio and maximum stress intensity on the small crack fatigue threshold in Ti–6Al–4V10.1016/S0013-7944(00)00099-0 ↗
26. John A, Newman, Mark A. James, William M, Johnston, Dy D. Le. Fatigue crack growth threshold testing of metallic rotorcraft materials, NASA/TM-2008-215331 and ARL-TR-4472; July 2008.
27. Investigation of the effects of shed-rate, initial Kmax, and geometric constraint on ΔKth in Ti–6Al–4V at room temperature10.1016/S0142-1123(99)00037-7 ↗
28. Stress ratio effects on small fatigue crack growth in Ti–6Al–4V10.1016/j.ijfatigue.2011.11.004 ↗
29. Short cracks initiated in Al 6013-T6 with the focused ion beam (FIB)-technology10.1016/j.ijfatigue.2007.01.003 ↗
30. Variability of large-crack fatigue-crack-growth thresholds in structural alloys10.1007/s11661-004-0278-2 ↗
31. Two critical stress intensities for threshold fatigue crack propagation10.1016/0956-716X(93)90538-4 ↗
32. Prediction of the behaviour of small fatigue cracks10.1016/j.msea.2006.09.084 ↗
33. Kondo Y, Endo M, McEvily AJ. Short crack growth behavior and its relation to notch sensitivity and VHCF. In: Proceeding 17th European conference on fracture, 2nd–5th September, Brno, Czech Republic; 2008. p.159–67.
34. The development of a general fatigue crack growth predictive model10.1007/BF00034336 ↗
35. Iyyer NS, Kwon YS, Nam Phan, P-3C crack growth life predictions under spectrum loading, In: 2003 International committee on aeronautic fatigue, Lucerne, Switzerland, May 5–9, 2003.
36. Piascik RS. The growth of small corrosion fatigue cracks in alloy 7075; 2004 .
37. Li D, Burns J, Bush R, Garratt M, Hinkle A, Mills T, et al. Characterization of corrosion–fatigue interaction for aluminum alloy substitution. In: Young RD, editor. Proceedings of the 8th joint NASA/FAA/DoD conference on aging aircraft; 2005. .
38. Application of B.F.R.P. patching to Mirage III aircraft10.1016/0167-8442(84)90035-1 ↗
39. Baker · 1988
40. A scientific evaluation of the approximate 2D theories for composite repairs to cracked metallic components10.1016/j.compstruct.2008.05.022 ↗
41. On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures10.1016/j.ijfatigue.2011.03.013 ↗
42. Characterization of the durability of adhesive bonds
43. Chalkley · 1998
44. On the application of the Kitagawa–Takahashi diagram to foreign-object damage and high-cycle fatigue10.1016/S0013-7944(01)00152-7 ↗
45. Short surface fatigue cracks growth under constant and variable amplitude loading10.1016/j.engfracmech.2009.07.017 ↗
46. Fatigue growth of short cracks in Ti-17: experiments and simulations10.1016/j.engfracmech.2006.11.016 ↗
47. A model for the formation of fatigue striations and its relationship with small fatigue crack growth in an aluminum alloy10.1016/j.ijfatigue.2010.05.005 ↗
48. Study of the fatigue lifetimes and crack propagation behaviour of a high speed steel as a function of the R value10.1111/j.1460-2695.2010.01441.x ↗
49. Hudak SJ, Davidson DL. The dependence of crack closure on fatigue loading variables, mechanics of crack closure, ASTM STP 982. In: Newman JC, Elber W, editors. Philadelphia (USA): American Society for Testing of Materials; 1988. p. 121–58. ISBN 0-8031-0996-2.10.1520/STP27204S ↗
50. Critical analysis of crack growth propagation laws10.1115/1.3656900 ↗
51. Forman RG, Kearney VE, Engle RM. Numerical analysis of crack propagation in cyclic loaded structures. ASTM A. Mtg 1966. Paper no. 66 WA/Met. 4; 1966.
52. Fatigue crack growth in a fillet welded joint10.1016/0013-7944(83)90130-3 ↗
53. Fatigue crack growth and control of 14MnNbq welding plates used for bridges10.1061/(ASCE)EM.1943-7889.0000295 ↗
54. Corrosion fatigue crack propagation of an aluminum alloy under periodic overloads10.1111/j.1460-2695.2011.01630.x ↗
55. Elber W. The significance of fatigue crack closure, damage tolerance of aircraft structures. ASTM STP-486; 1971. p. 230–42.10.1520/STP26680S ↗
56. Prediction of the behaviour of small fatigue cracks10.1016/j.msea.2006.09.084 ↗
57. Study of the fatigue lifetimes and crack propagation behaviour of a high speed steel as a function of the R value10.1111/j.1460-2695.2010.01441.x ↗
58. Jones R, Pitt S. Crack growth from etch pits in 7050-T7451 under combat aircraft spectra, paper 168. In: Proceedings corrosion & prevention 2012, Australasian Corrosion Society, Crown Conference Centre, Melbourne, 11th–14th November; 2012.10.1016/j.ijfatigue.2013.06.009 ↗
59. Experimentally derived crack growth models for different stress concentration factors10.1016/j.ijfatigue.2008.02.008 ↗
60. Crack closure under high load-ratio conditions for Inconel-718 near threshold behaviour10.1016/j.engfracmech.2008.09.009 ↗
61. Reflections on identifying the real Keffective in the threshold region and beyond10.1016/j.engfracmech.2006.12.029 ↗
62. Service load fatigue damage – a historical perspective10.1016/S0142-1123(99)00054-7 ↗
63. An experimental evaluation of crack face energy dissipation10.1016/j.ijfatigue.2006.01.009 ↗