Failure analysis of a large span longwall drift under water-rich roofs and its control techniques
Source abstract
Abstract
Abstract In this study, failure analysis of a large span longwall drift under water-rich roofs was presented relying on field observations and numerical simulations. We had sought to find the key points that caused the drift roof collapse and water inrush. The numerical results were similar with that observed from field situations, and they both determined the origins of the roof failure problem. Wrong location selection and unreasonable excavation and support schemes were verified to be the most important factors that caused roof failure of the drift. Subsequently, a new excavation location with poor roof aquifer was recommended. A two staged excavation procedure was employed. Firstly, a small span roadway was excavated and reinforced, then the roadway was widened to the design width. After the first pass, boreholes were drilled to dewater the roof aquifer, and chemical glue material was grouted into the roof to cement the pre-existing discontinuities and induced fractures. Such control techniques had been undertaken in the new longwall drift. Both numerical modeling and field measurement verified that the proposed method could guarantee the large span drift stability during excavation and longwall preparation period. The interest of this study resides in combining the integrated methods to evaluate the state of failure in a highly detailed manner and determine simultaneously control techniques for the thorny problem under study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Brady · 2004
2. The Use of Strata Management Techniques for the Optimisation of Secondary Support in Longwall Installation Roadways at United Colliery, NSW, Australia
3. Research on the law of instability and caving for large-span cut-hole roof with thin bedrock in depth
4. The Design and Management of Wide Roadways in Australian Coal Mines
5. Analysis of roof caving instability mechanism of large-section roadw ay under complex conditions
6. Wan · 2011
7. The mechanism of bedding separation in roof strata overlying a roadway within a thick coal seam: a case study from the Pingshuo coalfield, China10.1016/j.engfailanal.2015.12.006 ↗
8. Model test study on surrounding rock deformation and failure mechanisms of deep roadways with thick top coal10.1016/j.tust.2014.12.013 ↗
9. Evaluation of high local groundwater inflow to a rock tunnel by characterization of geological features10.1016/j.tust.2010.11.007 ↗
10. Numerical research on stability control of roofs of water-rich roadway10.1016/j.ijmst.2014.03.021 ↗
11. Experimental research on floor heave and water inrush in the broken rock roadway under great depth and high water pressure
12. Fluid–solid coupling analysis of rock pillar stability for concealed karst cave ahead of a roadway based on catastrophic theory10.1016/j.ijmst.2014.10.002 ↗
13. Strength reduction on saturation of coal and coal measures rocks with implications for coal pillar strength10.1016/j.ijrmms.2014.06.012 ↗
14. Mechanical properties of abandoned and closed roadways in the Kushiro coal mine, Japan10.1016/j.ijrmms.2011.04.012 ↗
15. Engineering geological characteristics, failure modes and protective measures of Longyou rock caverns of 2000years old10.1016/j.tust.2008.08.003 ↗
16. Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof10.1016/j.ijmst.2013.08.013 ↗
17. Gao · 2009
18. The application of audio frequency electric perspective to detection of coal mine work face
19. Numerical modeling on brittle failure of coal wall in longwall face—A case study10.1007/s12517-013-1181-1 ↗
20. Geomechanical and water vapor absorption characteristics of clay-bearing soft rocks at great depth10.1016/j.ijmst.2014.10.013 ↗
21. Rock roadway complementary support technology in Fengfeng mining district10.1016/j.ijmst.2014.10.010 ↗
22. Peng · 2013
23. Failure process analysis of spalling failure—comparison of laboratory test and numerical modelling data10.1016/j.tust.2012.05.005 ↗
24. Influence analysis of the anchor-hold of the resin bolt by the draining water in the drill hole
25. Analysis on anchorage performances and affecting factors of resin bolts
26. Discrete element modelling of deformation and damage of a roadway driven along an unstable goaf — a case study10.1016/j.coal.2014.02.010 ↗
27. Jalalifar · 2006
28. Reinforcement design and stability analysis for large-span tailrace bifurcated tunnels with irregular geometry10.1016/j.tust.2013.07.011 ↗