Fatigue life prediction model for riveted lap joints
Source abstract
Abstract
Applicability of currently available approaches to predict the fatigue life of riveted joints in aircraft structures is limited to cases when the actual joint, for which the predictions are made, and the reference joint, for which the prediction model has been tuned, differ only in the geometry. It is required that the riveting process should be similar for the actual and reference case, but the similarity criterion cannot be formulated in a precise way. In the prediction model developed by the authors and presented in this paper the influence of riveting on the fatigue life of a joint is unambiguously characterized by measurable quantities, namely rivet hole expansion and the load transfer distribution. Hence, the similarity of the riveting processes for the reference and actual joint is no longer required, which considerably extends the transferability of the reference results. A validation of the model is performed by comparing fatigue lives computed and observed in over 80 fatigue tests on aluminium alloy, lap joint specimens with three rivet rows, typical for aircraft fuselage skin connections in the longitudinal direction. Various combinations of production variables, such as sheet material and thickness, the squeeze stress and rivet type, were involved. A significant improvement in the present model prediction accuracy compared to a model which disregards the effect of riveting has been noted. Specifically, underestimates or overestimates of the fatigue life observed for the latter model in the case when hole expansion of the actual joint is larger or smaller respectively than for the reference joint are avoided with the present approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Failure Analysis and Simulation · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage10.1016/j.ijfatigue.2013.01.014 ↗
2. Skorupa · 2012
3. Steadman D, Carter A, Ramakrishnan R. Characterisation on MSD in an in-service fuselage lap joint. In: 3rd Joint FAA/DoD/NASA conference on aging aircraft. September 1999. Albuquerque, NM. Proc. on CD-Rom.
4. Ahmed A, Bakuckas Jr JG, Tan PW, Awerbuch J, Lau AC, Tan T-M. Growth of multiple-site damage (MSD) in an undamaged fuselage lap joint curved panel. In: Proc. 7th Joint FAA/DoD/NASA conference on aging aircraft, September 8–11, 2003, New Orleans, LA.
5. Shear loaded fastener installation
6. Homan JJ, Jongebreur AA. Calculation method for predicting the fatigue life of riveted lap joints. In: Blom AF, editor. Proc. 17th ICAF symposium, durability and structural integrity of airframes. 9–11 June 1993. Stockholm, Sweden, EMAS, Warley, West Midlands, U.K.; 1993. p. 175–90.
7. Das GK, Miller M, Sovar T. Durability assessment of fuselage single shear lap joint with pads. In: Rouchon J. editor. Proc. 21th ICAF symposium, design for durability in the digital Age. 27–29 June 2001. Tolouse, France. Cépaduès Ėdition, Tolouse, France; 2001. p. 567–95.
8. Fatigue crack growth in the aluminium alloy D16 under constant and variable amplitude loading10.1016/S0142-1123(03)00067-7 ↗
9. Effect of production variables on the fatigue behaviour of riveted lap joints10.1016/j.ijfatigue.2009.11.007 ↗
10. An experimental investigation on the fatigue performance of riveted lap joint
11. Schijve J. Some considerations on the correlation between the rivet squeezing force and the dimensions of the driven head. Memorandum M-847. TU Delft, Faculty of Aerospace Engineering; 2005.
12. Müller RPG. An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints. The significance of the rivet squeeze force, and a comparison of 2024-T3 and glare 3. Ph.D. Thesis. The Netherlands: Delft University of Technology; 1995.
13. Skorupa M, Machniewicz T, Schijve J, Skorupa A, Korbel A. Measurements of rivet flexibility and load transfer in a lap joint. In: Proceeding of the European conference on fracture, ECF18, 30 August-3 September 2010, Dresden, Germany; 2010. Paper C.05.1-1 (Proceedings on CD-Rom).
14. Observations and analyses of secondary bending for riveted lap joints10.1016/j.ijfatigue.2014.10.008 ↗
15. Schijve J. Some elementary calculations on secondary bending in simple lap joints, Report NLR TR 72036. Amsterdam: NLR; 1972.
16. Fatigue of structures and secondary bending in structural elements10.1016/j.ijfatigue.2009.01.009 ↗
17. Pilkey · 2007
18. Influence of fastener flexibility on the prediction of load transfer and fatigue life for multiple-row joints