High temperature corrosion behaviour of superalloys under actual waste incinerator environment
Source abstract
Abstract
Abstract In the present study, three superalloys viz. Superni 718, Superni 600 and Superco 605 were hung inside the secondary chamber of actual medical waste incinerator where the temperature is more than 1050 °C. Burning of medical waste produces very corrosive environment at high temperature which can degrade the components of construction. Hence the three superalloys were kept for 1000 h inside the chamber. Corrosion rate has been calculated in mpy. Corrosion products so produced were characterized using SEM/EDS and XRD technique. It was observed that both the Nickel based superalloys showed better corrosion resistance than the cobalt based superalloy under the given environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Coal and Its By-products · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Overview of municipal waste incineration industry in west Europe (based on the German experience)10.1016/0304-3894(95)00124-7 ↗
2. Waste incinerators: corrosion problems and construction materials — a review
3. Corrosion of Ultimet and 31OSS in a simulated waste incineration environment 750°C10.1007/BF00258173 ↗
4. Overview on the chlorine origin of MSW and Cl-originated corrosion during MSW & RDF combustion process
5. Crowley · 2003
6. Analysis of medical waste incinerator performance based on fuel consumption and cycle times10.4236/eng.2012.410080 ↗
7. Study of ashes from a medical waste incinerator in China: physical and chemical characteristics on fly ash, ash deposits and bottom ash10.1002/ep.11649 ↗
8. High temperature corrosion of superheater tubes in waste incinerators and coal-fired plants10.4028/www.scientific.net/MSF.461-464.973 ↗
9. Chlorine-induced high temperature corrosion: I. Metals and alloys — a review10.1515/HTMP.1992.10.2.67 ↗
10. Accelerated corrosion of pure Fe, Ni, Cr and several Fe-based alloys induced by ZnCl2–KCl at 450°C in oxidizing environment10.1016/S0921-5093(02)00386-6 ↗
11. Study of the HVOF Ni-based coatings' corrosion resistance applied on municipal solid-waste incinerators10.1007/s11666-008-9167-3 ↗
12. Use of incineration MSW ash: a review10.3390/su2071943 ↗
13. High temperature corrosion problems in waste incineration systems10.1007/BF02833571 ↗
14. Chemical properties of rare earth elements in typical medical waste incinerator ashes in China10.1016/j.jhazmat.2008.01.091 ↗
15. The implications of chlorine-associated corrosion on the operation of biomass-fired boilers10.1016/S0360-1285(00)00003-4 ↗
16. Materials problems in incineration plants
17. Schulz
18. Nørskov, L., Telschow, S., Wu, H. Effect of ammonium sulphate addition on the combustion of high chlorine and potassium biomass in a 12 MWth CFB—ash and species balance. http://web.abo.fi/instut/biofuelsGS2/kursen/asignment/mass%20balances.pdf, (accessed on 17 Nov 2014).
19. Viklund · 2011
20. High temperature corrosion of cobalt in SO210.1016/0010-938X(80)90124-9 ↗
21. The Ellingham Diagram, University of Cambridge (http://www.doitpoms.ac.uk/tlplib/ellingham_diagrams/ellingham.php, accessed on 13 Nov 2015).
22. The influence of heat-tinted surface layers on the corrosion resistance of stainless steels. INFACON 6
23. The influence of manganese on the high-temperature oxidation of iron–chromium alloys10.1002/maco.19890400403 ↗
24. Marina Fuser Pillis, Lalgudi Venkataraman Ramanathan. High temperature oxidation resistance of rare earth chromite coated Fe–20Cr and Fe–20Cr–4Al alloys. Mater. Res., 2007:10(3), 279–282.10.1590/S1516-14392007000300011 ↗
25. Hot corrosion behaviour of some superalloys in a simulated incinerator environment at 900°C10.1007/s11665-013-0721-x ↗
26. Corrosion behavior of bare, Cr3C2–25%(NiCr), and Cr3C2–25%(NiCr)+0.4%CeO2-coated Superni 600 under molten salt at 900°C10.1007/s11665-014-1177-3 ↗
27. Hot corrosion behavior of Bare, Cr3C2–(NiCr) and Cr3C2–(NiCr)+0.2wt.%Zr coated SuperNi 718 at 900°C10.1007/s11665-014-1279-y ↗
28. Evaluation of ceria added Cr3C2–25(NiCr) coating deposit on three superalloys under simulated incinerator environment10.1007/s11666-014-0209-8 ↗
29. Development of hot corrosion resistant coatings for gas turbines burning biomass and waste derived fuel gases
30. Effects of cyclic stress and temperature on oxidation damage of a nickel-based superalloy10.1016/j.msea.2011.04.029 ↗