Analytical investigation on failure development of group studs shear connector in push-out specimen under biaxial load action
Source abstract
Abstract
Abstract Arranging studs in group, referred to as group studs shear connector, has been applied in steel and concrete composite structures many years for its constructional efficiency. Nowadays, many long span composite bridges with group studs have been designed with wide transverse cantilevers and web spacing. The cantilever self-weight and passing-by moving loads thus make the studs under biaxial load action consisting of longitudinal shear force and transverse bending-induced action. The stud mechanical failure appearance and its development are not clear enough in this condition. In this case, we carried out a parametric push-out FEM analysis with introduced damage plasticity material models. In this study, effect of biaxial load action has been concerned in parametric models with different stud dimension and concrete strength. We found that biaxial load action could increase the stud shear stiffness and strength. And concerning push-out failure mode, the analysis showed that biaxial load action reduced concrete damage and resulted to a more obvious stud shear failure with less bending deformation. During the failure development, it tended to increase the capabilities of both stud and concrete of supporting local stress concentrations but slightly reduce the stud bending deformation extension. In addition, concrete strength and stud flexibility would affect the stud failure composition as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Metal Forming Simulation Techniques · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Parametrical static analysis on group studs with typical push-out tests
2. Headed steel stud anchors in composite structures, Part 2: tension and interaction10.1016/j.jcsr.2009.08.008 ↗
3. Effects of the combination of axial and shear loading on the behavior of headed stud steel anchors10.1016/j.engstruct.2009.08.019 ↗
4. The shear stiffness of stud shear connections in composite beams10.1016/0143-974X(86)90008-8 ↗
5. Behavior of headed stud shear connectors in composite beam10.1061/(ASCE)0733-9445(2005)131:1(96) ↗
6. A study of the grouped arrangements of stud connectors on shear strength behavior
7. Push-out tests on studs in high strength and normal strength concrete10.1016/0143-974X(94)00036-H ↗
8. Shear connectors in composite beams with longitudinally cracked slabs10.1061/(ASCE)0733-9445(1992)118:8(2004) ↗
9. FEM analysis on failure development of group studs shear connector under effects of concrete strength and stud dimension10.1016/j.engfailanal.2013.02.023 ↗
10. EUROCODE 4. EN 1994. Design of composite steel and concrete structures. Part 2 General rules and rules for bridges. 2005.
11. JTG D62-2004. Code for design of highway reinforced concrete and prestressed concrete bridges and culverts, Beijing: China Communication Press 2004; p. 60–62. [in Chinese].
12. Code for design of concrete structures, GB50010-2002. Ministry of housing and urban-rural development of China 2002. [in Chinese].
13. Jean Lemaitre. A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 1985.1; v107/83.10.1115/1.3225775 ↗