journal article·2015-01

The failure mechanics analysis of the solid self-piercing riveting joints

Jacek Mucha

Publisher page

Abstract

Abstract This paper presents the analysis of residual stress origin and its effect on rivet failure in the self-piercing riveting joints. The FEM method was used to analyze the residual stress distribution in the rivet. The effect of maximum joint forming force value on its maximum strength and residual stress distribution in the rivet was described. By increasing the SSPR rivet forming force the joints strength was increased. However, the pressing process with high value of the forming force is high-energy and accumulates significant residual stresses in the rivet. The maximum axial stress increased by 14% when the forming forces increased from 32 kN to 36 kN (increase by 12.5%). The theoretical considerations on safety coefficient determination for the rivet material were also presented. The fracture mechanics of elastic–plastic model body was characterized by using the energy state equations. The numerical calculations of J-integral, for two cases of maximum forming force in selected grooves in the rivet, were also presented. The energy release intensity in the stress concentrator (grooves on the rivet) was higher for the higher value of the forming force. The J-integral value for the forming force of 36 kN increased by 48% in comparison to the forming force value of 32 kN.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Innovative and highly productive joining technologies for multi-material lightweight car body structures10.1007/s11665-014-0962-3 ↗
2. Innovative joining technologies for multi-material structures10.1007/s40194-013-0098-3 ↗
3. Joining by forming—a review on joint mechanisms, applications and future trends10.1016/j.jmatprotec.2013.12.022 ↗
4. Research on press joining technology for automotive metallic sheets10.1016/S0924-0136(02)01083-X ↗
5. The experimental analysis of forming and strength of clinch riveting sheet metal joint made of different materials10.1155/2013/848973 ↗
6. The effect of material properties and joining process parameters on behavior of self-piercing riveting joints made with the solid rivet10.1016/j.matdes.2013.06.037 ↗
7. Local–global approach using experimental and/or simulated data to predict distortion caused by mechanical joining technologies10.1007/s11740-012-0431-5 ↗
8. Enlargement of the application range of solid punch riveting by two-piece dies10.1007/s12289-010-0938-2 ↗
9. The numerical analysis of the effect of the joining process parameters on self piercing riveting using the solid rivet10.1016/j.acme.2013.11.002 ↗
10. Recent development in finite element analysis of self-piercing riveted joints10.1007/s00170-011-3414-3 ↗
11. Numerical study on die design parameters of self-piercing riveting process based on orthogonal test10.1007/s12204-014-1504-8 ↗
12. Numerical and experimental analysis of preliminary stress, limiting load capacity and fatigue life of blind riveted joints
13. A study of quality parameters and behavior of self-piercing riveted aluminium sheets with different joining conditions10.5545/sv-jme.2009.043 ↗
14. Fatigue life estimation of coach peel riveted joints using multi-axial fatigue criteria10.1016/j.matdes.2014.05.033 ↗
15. Effect of galvanic corrosion on durability of aluminium/steel self-piercing rivet joints10.1179/1743278214Y.0000000168 ↗
16. Forced vibration behavior of self-piercing riveting joints10.4028/www.scientific.net/AMM.440.153 ↗
17. Feasibility of measuring residual stress profile in different self-pierce riveted joints10.1179/1362171811Y.0000000076 ↗
18. Optimising parameters for meaningful measurement of residual strain by neutron diffraction in self-pierce riveted joints10.1179/1362171813Y.0000000126 ↗
19. Users Handbook: MSC, Marc Volume A: Theory and User Information, Version 2010, MSC Software Corporation, 2010.
20. Averaged strain energy density and J-integral for U- and blunt V-shaped notches under torsion10.1007/s10704-014-9953-5 ↗
21. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
22. The constitutive equations for FEM analysis10.1016/S0924-0136(00)00635-X ↗
23. Normalised effective K versus Lr failure assessment diagrams as applied to a flaw in the vicinity of a stress concentration10.1016/S0020-7225(99)00066-X ↗
24. Fracture initiation at the root of a sharp groove: description in terms of Kr–Lr failure assessment curves10.1016/S0020-7225(00)00039-2 ↗
25. The effect of geometrical parameters on the Kr–Lr failure assessment curve for a range of tensile loading configurations10.1016/S0020-7225(99)00007-5 ↗
26. Astiz MA, Elices M, Galvez VS, On the energy release rates in axisymmetrical problems. 4th ICF 1977, Fracture 1977; 3: p. 395–400.10.1016/B978-0-08-022142-7.50062-4 ↗
27. J-integral related quantities in axisymmetric cases10.1007/BF00034263 ↗
28. Tierean M, Baltes L, Computing of Stress Intensity Factor using J-Integral Method with F.E.A. Annals of DAAAM 2009. In: Proc. of the 20th Int. DAAAM Symp; 2009. p. 1105–1106.