Meshing characteristics of spur gear pair under different crack types
Source abstract
Abstract
Abstract The effects of three different gear crack types such as, for example, the crack along tooth width uniformly and the crack propagating in the depth direction (crack type 1, CT1), the crack along tooth width non-uniformly and the crack propagating in both the depth and the tooth width directions (crack type 2, CT2), and the spatial crack propagating in the depth, the tooth width and the tooth profile directions (crack type 3, CT3) on the time-varying mesh stiffness (TVMS) of spur gear pairs are investigated in this study. Firstly, an analytical model for studying these three types of cracks is established based on potential energy method. A finite element (FE) model of the cracked spur gear pair is also built in the ANSYS software as well. In order to verify the analytical method, the TVMS obtained from analytical method is compared with that obtained from FE method under different crack types. Moreover, the effects of the depth, the length and the height of crack are discussed. The equivalent stress, contact pressure and displacement of tooth are also analyzed under different crack types by using the FE method. The results show that the effect of crack depth on TVMS is the largest, while that of the crack height is the smallest, and the non-penetrating crack for CT2 and CT3 will generate the non-uniform load distribution along tooth width.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Review on dynamics of cracked gear systems10.1016/j.engfailanal.2015.06.004 ↗
2. Hertzian damping, tooth friction and bending elasticity in gear impact dynamics10.1115/1.3267437 ↗
3. Tian · 2004
4. Simulation of spur gear dynamics and estimation of fault growth10.1016/j.jsv.2008.03.038 ↗
5. Analytical modeling of spur gear tooth crack and influence on gear mesh stiffness10.1016/j.euromechsol.2008.07.007 ↗
6. Research on the dynamic mechanism of the gear system with local crack and spalling failure10.1016/j.engfailanal.2012.05.022 ↗
7. An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack10.1016/j.engfailanal.2014.04.005 ↗
8. Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set10.1016/j.mechmachtheory.2014.02.001 ↗
9. Fault feature analysis of a cracked gear coupled rotor system
10. Time-varying mesh stiffness calculation of cracked spur gears10.1016/j.engfailanal.2014.05.018 ↗
11. Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness10.1016/j.engfailanal.2013.01.011 ↗
12. Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair10.1016/j.engfailanal.2014.12.020 ↗
13. Vibration signal analysis for gear fault diagnosis with various crack progression scenarios10.1016/j.ymssp.2013.06.040 ↗
14. Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis10.1016/j.engfailanal.2013.08.008 ↗
15. Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth10.1016/j.engfailanal.2011.07.006 ↗
16. Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crack10.1016/j.engfailanal.2016.05.006 ↗
17. The effects of spur gear tooth spatial crack propagation on gear mesh stiffness10.1016/j.engfailanal.2015.04.013 ↗
18. Effects of tooth plastic inclination deformation due to spatial cracks on the dynamic features of a gear system10.1007/s11071-016-3218-y ↗
19. Three-dimensional analyses by finite element method of a spur gear: effect of cracks in the teeth foot on the mesh stiffness10.1007/s11668-007-9078-5 ↗
20. The dynamic modeling of a spur gear in mesh including friction and a crack10.1006/mssp.2001.1414 ↗
21. Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations10.1016/j.ymssp.2005.02.009 ↗
22. Wang · 2003
23. Fault features analysis of cracked gear considering the effects of the extended tooth contact10.1016/j.engfailanal.2014.11.018 ↗
24. Effects of gear crack propagation paths on vibration responses of the perforated gear system10.1016/j.ymssp.2015.03.008 ↗
25. ISO/CD 6336-2 · 2006
26. ISO/CD 6336-3 · 2006
27. Approximate equations for the mesh stiffness and the load sharing ratio of spur gears including hertzian effects10.1016/j.mechmachtheory.2016.11.014 ↗
28. Tooth stress calculation of metal spur and helical gears10.1016/j.mechmachtheory.2015.06.003 ↗
29. Contact stress calculation of undercut spur and helical gear teeth10.1016/j.mechmachtheory.2011.06.015 ↗
30. Adaptive grid-size finite element modeling of helical gear pairs10.1016/j.mechmachtheory.2014.07.009 ↗
31. Experimental measurement of strain and stress state at the contacting helical gear pairs10.1016/j.measurement.2015.12.046 ↗
32. Dynamic tooth root strains and experimental correlations in spur gear pairs10.1016/j.mechmachtheory.2016.03.010 ↗
33. Improved time-varying mesh stiffness model of cracked spur gears10.1016/j.engfailanal.2015.06.007 ↗
34. Contribution of gear body to tooth deflections-a new bidimensional analytical formula10.1115/1.1758252 ↗
35. An improved analytical method for mesh stiffness calculation of spur gears with tip relief10.1016/j.mechmachtheory.2015.11.017 ↗
36. Following spur gear crack propagation in the tooth foot by finite element method10.1007/s11668-010-9395-y ↗