Characterisation of acrylic copolymer treated concretes and concretes of reinforced concrete buildings collapsed in the 6 February 2023 Mw = 7.8 Kahramanmaraş (Türkiye) earthquake
Source abstract
Abstract
T & uuml;rkiye was devastated by two major earthquakes in Kahramanmaras , on 6 February 2023, namely Pazarc & imath;k (Mw = 7.8) and Elbistan (Mw = 7.6). The magnitude of the earthquakes caused more than 50,000 casualties due to the weak structural properties of the buildings. In this study, the mechanical properties and chemical characterisation of the concrete (EQC) of the collapsed reinforced concrete building were investigated. For this, a series of characterisation methods such as scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), it was characterised using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used. The analyses results showed that EQC had low cement dosage, time-dependent carbonation and inadequate curing. It was also compared to specimens with acrylic copolymer (ABCP) applied to the surface. The polymer concrete reached approximately 80 % of its target strength without curing at ambient temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. United States Geological Survey (USGS)., M 7.8—Pazarcik Earthquake, Kahramanmaras Earthquake Sequence. Available online: https://earthquake.usgs.gov/earthquakes/eventpage/us6000jllz/executive, (2023).
2. United States Geological Survey (USGS)., M 7.5—Elbistan Earthquake, Kahramanmaras Earthquake Sequence. Available online: https://earthquake.usgs.gov/earthquakes/eventpage/us6000jlqa/executive, (2023).
3. Government of Türkiye. AFAD, Press Bulletin about the Earthquake in Kahramanmara¸s-34. 2023. Available online: https://reliefweb.int/report/turkiye/afad-press-bulletin-about-earthquake-kahramanmaras-34-entr (accessed on 23 February 2023), (2023).
4. AFAD Disaster and Emergency Management Presidency, 06 February 2023 Pazarcik-Elbistan Kahramanmaraş (Mw: 7.7 - Mw: 7.6) Earthquakes Report General Directorate of Earthquake and Risk Reduction Earthquake Department , Ankara, Türkiye, 2023.
5. Bingöl Province earthquake risk analysis, Erzincan University
6. Siirt Province earthquake hazard analysis
7. New historical data on crustal subduction10.1086/628343 ↗
8. Active tectonics of the Mediterranean region10.1111/j.1365-246X.1972.tb02351.x ↗
9. 24 January 2020 Sivrice (Elazig) earthquake damages and determination of earthquake parameters in the region
10. E. Işık, F. Avcıl, A. Büyüksaraç, R.İzol M.H. Arslan, C. Aksoylu, H. Ulutaş, Structural damages in masonry buildings in Adıyaman during the Kahramanmaras¸ (Turkiye) earthquakes (Mw 7.7 and Mw 7.6) on 06 February 2023, Eng Fail Anal 151 (2023).10.1016/j.engfailanal.2023.107405 ↗
11. Performance of reinforced concrete buildings during the May 1, 2003 Bingol ¨ earthquake in Turkey10.1016/j.engstruct.2004.02.005 ↗
12. Structural damage observed in reinforced concrete buildings in Adiyaman during the 2023 Turkiye Kahramanmaras earthquakes10.1016/j.istruc.2023.105578 ↗
13. Effect on RC buildings of 6 February 2023 Turkey earthquake doublets and new doctrines for seismic design10.1016/j.engfailanal.2023.107521 ↗
14. Z. Celep (1996), Introduction to Structural Dynamics and Earthquake Engineering, Sema Matbaacılık, İstanbul, Türkiye, 1996.
15. Retrofitting of shear compression failure-critic short columns with a new technique10.3390/buildings12122266 ↗
16. E. Sayın, B. Yön, O. Onat, M. Gör, M.E. Öncü, E. Tuğrul Tunç, D. Bakır, M. Karaton, Y. Calayır, 24 January 2020 Sivrice-Elazığ, Turkey earthquake: geotechnical evaluation and performance of structures, Bulletin of Earthquake Engineering 19 (2021) 657–684. Doi: 10.1007/s10518-020-01018-4.10.1007/s10518-020-01018-4 ↗
17. Failures of masonry dwelling triggered by East Anatolian fault earthquakes in Turkey10.1016/j.soildyn.2020.106126 ↗
18. Structural damages observed in buildings after the January 24, 2020 Elazığ-Sivrice earthquake in Türkiye
19. Performance and damages of reinforced concrete buildings during the October 23 and November 9, 2011 Van, Turkey, earthquakes10.1016/j.soildyn.2013.06.004 ↗
20. Z. Celep, A.Erken, B.Taşkın, A. İlki, Failures of masonry and concrete buildings during the March 8, 2010, Kovancılar and Palu (Elazıg) Earthquakes in Turkey, Eng. Fail. Anal. 18 (2011) 868–889.10.1016/j.engfailanal.2010.11.001 ↗
21. O. Onat, B. Yön, M.E. Öncü, S. Varolgüneş, A. Karaşin, S. Cemalgil, Field reconnaissance and structural assessment of the October 30, 2020, Samos, Aegean Sea earthquake: an example of severe damage due to the basin effect, Natural Hazards 112 (2022) 75–117. Doi: 10.1007/s11069-021-05173-y.10.1007/s11069-021-05173-y ↗
22. Structural failures of adobe buildings during the February 2023 Kahramanmaraş (Türkiye) earthquakes
23. E. Isik, M.R. Shendkar, F. Avcil, A. Büyüksaraç, S.S. Deshpande, A Study on the Determination of Damage Levels in Reinforced Concrete Structures during the Kahramanmaras Earthquake on February 06, 2023, in: E3S Web of Conferences, EDP Sciences, 2023. Doi: 10.1051/e3sconf/202340504029.10.1051/e3sconf/202340504029 ↗
24. The effect of material quality on buildings moderately and heavily damaged by the Kahramanmaraş earthquakes
25. TBEC, Turkey Building Earthquake Code -18th March 2018, Ankara, Turkey, 2018.
26. TEC-2007, Ministry of Construction and Settlement, Specifications on Buildings Constructed in Dısaster Areas, Ankara, Türkiye, 2007.
27. T. Akakın, C. Kılınç, A. Işık, H. Zengin, Ready Mixed Concrete Industry and Developments in Concrete Use, Ready Concrete (2013).
28. Experimental evaluation of concrete strength in existing buildings10.1680/macr.2007.00091 ↗
29. Experimental study of early-age behavior of high performance concrete deck slabs under different curing methods10.1016/j.conbuildmat.2005.04.001 ↗
30. Effect of environmental conditions on the properties of fresh and hardened concrete10.1016/S0958-9465(01)00007-5 ↗
31. T.S. Poole, Guide for curing of Portland cement concrete pavements, vol. II. Federal Highway Administration, Report No. FHWA-HRT-05-038, 2006.
32. ACI Committee 308ACI Committee 308, Guide to curing concrete (ACI 308R-01), American Concrete Institute, Farmington Hills, 2001.
33. An experimental study on strength and durability for utilization of fly ash in concrete mix10.1155/2014/417514 ↗
34. Effect of curing compounds on the properties and microstructure of cement concretes10.1016/j.conbuildmat.2015.10.124 ↗
35. P. K. Mehta, P.J. M Monteiro, Concrete: Microstructure, Properties, and Materials, 2006. pp-17-39.
36. Erdoğan · 2002
37. Experimental study on effect of various factors on compressive strength of concrete
38. The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose - Part II: Mechanical and water impermeability properties10.1016/j.conbuildmat.2015.08.033 ↗
39. The study of low polymer/cement ratio high elastic polymer-modified cement-based waterproof coatings
40. C.Wang, X.Liu, X.Chen, Research on high-performance polymer/cementbased waterproof coatings, Coat. Technol. Abstr. 35 (2014) 19–22 (in Chinese). [4] F. Yan, C. Zhao, Mechanism and application progress of polymer–cement waterproof coating, Plat. Finish. 34 (2012) 25–28.
41. Effect of curing methods on strength and durability of concrete under hot weather conditions10.1016/j.cemconcomp.2013.04.008 ↗
42. K. Wang, J.K. Cable, Z. Ge, Evaluation of Pavement Curing Effectiveness and Curing Effects on Concrete Properties, (n.d.). Doi: 10.1061/ASCE0899-1561200618:3377.
43. The durability characteristics of high performance concrete: A review10.1016/S0958-9465(02)00081-1 ↗
44. D. Ye, C.-S. Shon, A.K. Mukhopadhyay, D.G. Zollinger, New Performance-Based Approach to Ensure Quality Curing during Construction, (n.d.). Doi: 10.1061/ASCEMT.1943-5533.0000068.
45. Effect of water-based acrylic copolymer on void systems of cementitious repair mortar
46. BS EN 196-6:2018 Methods of testing cement is classified in these ICS categories: 91.100.10 Cement. Gypsum. Lime. Mortar, 2018.
47. ASTM 204, Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus, 2023.
48. 2001/58/EC, Commission Directive 2001/58/EC of 27 July 2001 amending for the second time Directive 91/155/EEC defining and laying down the detailed arrangements for the system of specific information relating to dangerous preparations in implementation of Article 14 of European Parliament and Council Directive 1999/45/EC and relating to dangerous substances in implementation of Article 27 of Council Directive 67/548/EEC (safety data sheets) (Text with EEA relevance). (2001). Official Journal, L 212, 24-33. , 2001.
49. TEC-1975, Ministry of Construction and Settlement, Specifications on Structures Constructed in Disaster Area, Ankara, Türkiye, Ankara, Türkiye, 1975.
50. Google, Google Maps (Accessed December 2023), (2023).
51. Structural damage assessment of reinforced concrete buildings in Adıyaman after Kahramanmaraş (Türkiye) Earthquakes on 6 February 202310.1016/j.engfailanal.2023.107799 ↗
52. Analytic investigation of hooked stirrups on seismic behavior of reinforced concrete 3D frame buildings10.3390/app132011590 ↗
53. TS 802, “Concrete Mixture Design Calculation Principles”, Turkish Standards Institute, Ankara, 2016.
54. IAEA. International Atomic Energy Agency, Guidebook on Non-Destructive Testing Of Concrete Structure., Vienna, Austria, 2002.
55. ASTM C 597-02, Pulse Velocity Through Concrete. American Society for Testing and Material: West Conshohocken, PA, USA., 2003.
56. EN 12504-4, Testing concrete–Part 4: determination of ultrasonic pulse velocity. British Standards Institution, 18., 2004.
57. ASTM C39-12, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2012., 2012.
58. Q. Ahmed Yousif, I. Bedirhanoglu, M. Enver Aydin, Z. Zebari, Interdependence between Structural Engineering and Construction Management Edited by Ozevin The effect of age on the compressive strength of concrete by using ultrasonic pulse velocity, 2019.10.14455/ISEC.res.2019.198 ↗
59. IS, Non-destructive testing of concrete methods of test, part1, IS, 13311.by, bureau of indian standards، manak bhavan,9 bahadur shah zafar maro new delhi 110002, 1992.
60. L. Czarnecki, Polymer-Concrete Composites for the repair of concrete structures, in: MATEC Web of Conferences, EDP Sciences, 2018. Doi: 10.1051/matecconf/201819901006.10.1051/matecconf/201819901006 ↗
61. Effect of different curing regimes and durations on early strength development of reactive powder concrete10.1016/j.conbuildmat.2017.07.181 ↗
62. Composition, morphology and nanostructure of C-S-H in white Portland cement pastes hydrated at 55 °C10.1016/j.cemconres.2007.09.001 ↗
63. Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium10.1016/j.cemconres.2009.08.004 ↗
64. Determination of ASR in concrete using characterization methods10.3390/buildings14030657 ↗
65. P. Venyite, J. Giogetti Deutou Nemaleu, R. Cyriaque Kaze, A. Bruno Tchamba, E. Kamseu, U. Chinje Melo, C. Leonelli, Alkali-silica reactions in granite-based aggregates: The role of biotite and pyrite, Constr Build Mater 320 (2022). Doi: 10.1016/j.conbuildmat.2021.126259.10.1016/j.conbuildmat.2021.126259 ↗
66. Effect of albite on shrinkage and carbonation resistance of alkali-activated slag10.1016/j.conbuildmat.2023.134141 ↗
67. A review of mineral carbonation by alkaline solidwaste10.1016/j.ijggc.2022.103798 ↗
68. H.F. Taylor, Cement chemistry, 1997.10.1680/cc.25929 ↗
69. Influence of red mud on fresh and hardened properties of self-compacting concrete10.1016/j.conbuildmat.2018.05.171 ↗
70. Role of the filler on Portland cement hydration at early ages10.1016/j.conbuildmat.2011.07.021 ↗
71. Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
72. A. Ma Guerrero Bustos, J.J.G. Redondo, G.P.Á. Quiñones, S.G. Elizalde, Multi-scale analysis of cement pastes with nanosilica addition, Advances in Cement Research 26 (2014) 271–280. Doi: 10.1680/adcr.13.00023.10.1680/adcr.13.00023 ↗
73. Investigation of C-S-H in ternary cement pastes containing nanosilica and highly-reactive supplementary cementitious materials (SCMs): Microstructure and strength10.1016/j.conbuildmat.2018.10.235 ↗
74. R.M. Silverstein, F.X. Webster, D.J. Kiemle, Webster, Spectrometric identification of organic compounds, John Wiley & Sons, 2005..
75. Study of the structure of alkali-silica reaction gel by high-resolution NMR spectroscopy10.1016/j.jnoncrysol.2006.03.112 ↗
76. Characteristics of brick used as aggregate in historic brick-lime mortars and plasters10.1016/j.cemconres.2006.03.011 ↗
77. Analyses of the surfaces of concrete by Raman and FT-IR spectroscopies: Comparative study of hardened samples after demoulding and after organic post-treatment10.1002/sia.3548 ↗
78. M. Singh, S. Waghmare, S. Vinodh Kumar, Characterization of lime plasters used in 16th century Mughal monument, J Archaeol Sci 42 (2014) 430–434. Doi: 10.1016/j.jas.2013.11.019Ö. Doi: 10.1007/s10853-012-6535-7.10.1016/j.jas.2013.11.019 ↗
79. Overview about the use of fourier transform infrared spectroscopy to study cementitious materials10.2495/MC130221 ↗
80. Theoretical and experimental study of structures and properties of cement paste: The nanostructural aspects of CSH10.1016/j.jpcs.2011.05.001 ↗
81. Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume10.1016/j.conbuildmat.2019.117888 ↗
82. Influence of the surface properties of concrete on the adhesion of coating: Characterization of the interface by peel test and FT-IR spectroscopy10.1016/j.porgcoat.2011.05.009 ↗
83. Structure of calcium silicate hydrate (C-S-H): Near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
84. A. Demirbas, Carbon dioxide disposal via carbonation, Energy Sources, Part A: Recovery, Utilization and Environmental Effects 29 (2007) 59–65. Doi: 10.1080/009083190934004.10.1080/009083190934004 ↗
85. Phase and morphology evolution of calcium carbonate precipitated by carbonation of hydrated lime10.1007/s10853-012-6535-7 ↗
86. Characterization of cement stabilized pond ash using FTIR spectroscopy10.1016/j.conbuildmat.2020.120136 ↗
87. Z.P. Bazant, M.F. Kaplan, Concrete at high temperatures: material properties and mathematical models., 1996.
88. A. Noumowe, Effet de hautes températures (20-600 C) sur le béton: cas particulier du béton a hautes performances (Doctoral dissertation, INSA)., 1995.
89. G. Platret, Suivi de l’hydratation du ciment et de l’évolution des phases solides dans les bétons par analyse thermique, caractéristiques microstructurales et propriétés relativesa la durabilité des bétons. , 2002.
90. C. Alonso, L. Fernandez, Dehydration and rehydration processes of cement paste exposed to high temperature environments, 2004.10.1023/B:JMSC.0000025827.65956.18 ↗
91. Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates10.1016/j.cemconcomp.2004.02.013 ↗
92. Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures10.1016/j.firesaf.2011.07.010 ↗
93. Prediction of thermal decomposition of hardened cement paste10.1061/(ASCE)MT.1943-5533.0000423 ↗
94. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
95. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
96. Effect of cement substitution by limestone on the hydration and microstructural development of ultra-high performance concrete (UHPC)10.1016/j.cemconcomp.2016.12.009 ↗
97. M. Doğruyol, E.Ayhan, A. Karaşin, Effect of Waste Steel Fiber Use on Concrete Behavior at High Temperature. Case Studies in Construction Materials, 2024 e03051, doi:10.1016/j.cscm.2024.e03051.10.1016/j.cscm.2024.e03051 ↗