Mechanical behaviour of hybrid FFRP/aluminium honeycomb sandwich structures
Source abstract
Abstract
The combination of lightweight properties and high energy absorption capacity makes sandwich structures suitable for applications in transportation industry, such as automotive, aerospace, and shipbuilding industry. In these fields, the gas emissions reduction, fuel saving, vehicle safety and load capacity increase are currently important requirements. This research deals with the study of the mechanical behaviour of a “green” hybrid honeycomb sandwich structure made by an aluminium honeycomb core and flax fibres reinforced skins. Specific interest has been addressed to their mechanical behaviour in terms of bending properties and low-velocity impact response. For the impact tests, two indenters having hemispherical geometry with a diameter of 10 mm (H10) and 20 mm (H20) were selected. The results were compared with other hybrid structures analysed in previous studies. The static three-point bending tests produced different collapse modes, depending on the support span distance. Non-destructive evaluation was carried out for failure mode analysis by optical microscopy and digital radiography (DR). In the aluminium-flax hybrid sandwich structures it is found an increase in the impact strength of 38 % compared to the unreinforced aluminium honeycomb sandwich structures. In terms of specific energy absorption (SEA), it is interesting to underline an increase of 14 % compared to traditional AHS structures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Mechanical properties study on sandwich hybrid metal/(carbon, glass) fiber reinforcement plastic composite sheet10.1007/s42114-021-00213-4 ↗
2. Advanced lightweight materials for Automobiles: A review10.1016/j.matdes.2022.110994 ↗
3. Review of current trends for metal-based sandwich panel: Failure mechanisms and their contribution factors10.1016/j.engfailanal.2021.105302 ↗
4. Sandwich structures with prismatic and foam cores: A review10.1002/adem.201800036 ↗
5. Mechanical properties and failure mechanisms of sandwich panels with ultra-lightweight three-dimensional hierarchical lattice cores10.1016/j.ijsolstr.2017.09.024 ↗
6. Creative design for sandwich structures: A review
7. Review of composite sandwich structure in aeronautic applications10.1016/j.jcomc.2020.100004 ↗
8. Energy absorption characteristics of origami-inspired honeycomb sandwich structures under low-velocity impact loading10.1016/j.matdes.2021.109837 ↗
9. Experimental and numerical analysis of the ballistic response of agglomerated cork and its bio-based sandwich structures10.1016/j.engfailanal.2021.105904 ↗
10. Influence of interfacial adhesive on impact and post-impact behaviors of CFRP/end-grain balsawood sandwich composites10.1016/j.compositesb.2021.108718 ↗
11. Contribution of adhesive-reinforced interface on the performance of light-weight sustainable sandwich composites10.1177/00219983211066643 ↗
12. A novel sandwich panel made of prepreg flax skins and bamboo core10.1016/j.jcomc.2020.100048 ↗
13. Experimental investigation on the effects of core/facing interface performance on the low-velocity impact behavior of honeycomb sandwich panels10.1007/s11665-020-05181-2 ↗
14. The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures10.1016/j.compositesb.2016.11.060 ↗
15. Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels10.1016/j.compstruct.2019.111284 ↗
16. Recent advances in novel metallic honeycomb structure10.1016/j.compositesb.2019.02.011 ↗
17. High-velocity impact behavior of sandwich structures with AL faces and foam cores—Experimental and numerical study10.1016/j.ast.2020.106039 ↗
18. The impact and post-impact flexural behaviors of CFRP/aluminum-honeycomb sandwich10.1016/j.ijimpeng.2023.104507 ↗
19. Low-velocity impact response and post-impact flexural behaviour of composite sandwich structures with corrugated cores10.1016/j.compstruct.2018.01.024 ↗
20. Flexural deformation behavior of carbon fiber reinforced aluminium hybrid foam sandwich structure10.1016/j.compositesb.2019.107729 ↗
21. Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement10.1016/j.compscitech.2013.01.016 ↗
22. High-impact resistant hybrid sandwich panel filled with shear thickening fluid10.1016/j.compstruct.2022.115208 ↗
23. Collapse modes of aluminium honeycomb sandwich structures under fatigue bending loading10.1016/j.tws.2019.106363 ↗
24. Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads10.1016/j.oceaneng.2020.108344 ↗
25. Correlation between foam structure and mechanical performance of aluminium foam sandwich panels10.1016/j.msea.2020.140260 ↗
26. Residual flexural properties of CFRP sandwich structures with aluminum honeycomb cores after low-velocity impact
27. A review of impact testing on marine composite materials: Part I - Marine impacts on marine composites10.1016/j.compstruct.2017.12.073 ↗
28. Bending behavior of sandwich beam with tailored hierarchical honeycomb cores10.1016/j.tws.2020.107001 ↗
29. Experimental investigation of the crushing characteristics in sandwich panels in the application of light vehicles using three-point bending tests10.1016/j.engfailanal.2021.105725 ↗
30. Prediction model for the impact response of glass fibre reinforced aluminium foam sandwiches10.1016/j.ijimpeng.2014.11.012 ↗
31. Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches10.1177/1099636216629375 ↗
32. Influences of skin thickness, core topology, depth and direction on flexural deformation and ductile failure of Al honeycomb-based sandwich structures10.1016/j.compositesb.2022.109957 ↗
33. Experimental investigation on bending behavior of honeycomb sandwich panel with ceramic tile face-sheet10.1016/j.compositesb.2018.10.077 ↗
34. Bending and environmental characteristics of an eco-friendly sandwich panel with cork stopper cores
35. Bio-based/green sandwich structures: A review10.1016/j.tws.2022.109426 ↗
36. Improvement of dynamic tensile properties of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) polymer alloys using a crosslinking agent and observation of fracture surfaces10.1016/j.ijimpeng.2014.11.010 ↗
37. Dynamic crash responses of bio-inspired aluminum honeycomb sandwich structures with CFRP panels10.1016/j.compositesb.2017.03.030 ↗
38. Impact behaviour of flax/epoxy composite plates10.1016/j.ijimpeng.2015.01.006 ↗
39. Experimental assessment of low velocity impact damage in flax fabrics reinforced biocomposites by coupled high-speed imaging and DIC analysis10.1016/j.compositesa.2020.106137 ↗
40. E. Oterkus, C. Diyaroglu, D. De Meo, G. Allegri, Fracture modes, damage tolerance and failure mitigation in marine composites, in: Mar. Appl. Adv. Fibre-Reinforced Compos., Elsevier, 2016: pp. 79–102, doi: 10.1016/B978-1-78242-250-1.00004-1.10.1016/B978-1-78242-250-1.00004-1 ↗
41. Failure analysis of a CFRP mast of a racing sailboat10.1016/j.engfailanal.2023.107263 ↗
42. Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase10.1016/S1359-835X(02)00040-4 ↗
43. A new approach for flexible PBAT/PLA/CaCO 3 films into agriculture10.1002/app.46660 ↗
44. Is the low shear modulus of flax fibres an advantage for polymer reinforcement?10.1016/j.matlet.2016.09.067 ↗
45. Mechanical properties and structure of injection molded poly(hydroxybutyrate-co-hydroxyvalerate)/poly(butylene adipate-co-terephthalate) (PHBV/PBAT) blends10.1002/app.53880 ↗
46. Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review10.1016/j.addr.2016.06.012 ↗
47. Single and double-layer honeycomb sandwich panels under impact loading10.1016/j.ijimpeng.2018.07.013 ↗