Hydrogen embrittlement effects on remaining life and fatigue crack growth rate in API 5L X52 steel pipelines under cyclic pressure loading
Source abstract
Abstract
Transporting hydrogen gas through the existing natural gas pipeline network offers an efficient solution for energy storage and conveyance. Hydrogen generated from excess renewable electricity can be conveyed through the API 5L steel-made pipelines that already exist. In recent years, there has been a growing demand for the transportation of hydrogen through existing gas pipelines. Therefore, numerical and experimental tests are required to verify and ensure the mechanical integrity of the API 5L steel pipelines that will be used for pressurized hydrogen transportation. Internal pressure loading is likely to accelerate hydrogen diffusion through the internal pipe wall and consequently accentuate the hydrogen embrittlement of steel pipelines. Furthermore, pre-cracked pipelines are susceptible to quick failure mainly under a time-dependent cyclic pressure loading that drives fatigue crack propagation. Meanwhile, after several loading cycles, the initial cracks will propagate to a critical size. At this point, the remaining service life of the pipeline can be estimated, and inspection intervals can be determined. This paper focuses on the hydrogen embrittlement of API 5L steel-made pipeline under cyclic pressure loading. Pressurized hydrogen gas is transported through a network of pipelines where demands at consumption nodes vary periodically. The resulting pressure profile over time is considered a cyclic loading on the internal wall of a pre-cracked pipeline made of API 5L steel-grade material. Numerical modeling has allowed the prediction of fatigue crack evolution and estimation of the remaining service life of the pipeline. The developed methodology presented in this paper is based on the ASME B31.12 standard, which outlines the guidelines for hydrogen pipelines with reference to the ASME BPVC Section VIII, Division 3, Article KD-10.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. ASME B31.12 Hydrogen Piping and Pipeline Code, 2019 Edition. (2019). ASME International, New York, USA.
2. https://www.woodplc.com/insights/articles/r-and-d-helping-to-repurpose-infrastructure-to-transport-hydrogen.
3. Estimation of the Influence of Compressed Hydrogen on the Mechanical Properties of Pipeline Steels10.3390/en14196085 ↗
4. Time development of new hydrogen transmission pipeline networks for France10.1016/j.ijhydene.2014.04.190 ↗
5. Hazards, safety and knowledge gaps on hydrogen transmission via natural gas grid: a critical review10.1016/j.ijhydene.2016.07.171 ↗
6. DNV-OS-F101, Offshore Standard - Submarine Pipeline Systems code, (2013). Det Norske Veritas AS.
7. Comparison of hydrogen embrittlement in three pipeline steels in high pressure gaseous hydrogen environments10.1016/j.corsci.2012.01.028 ↗
8. Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking10.1016/j.ijhydene.2009.09.090 ↗
9. A comparative study of hydrogen induced cracking behavior in API 5L X60 and X70 pipeline steels10.1016/j.engfailanal.2013.04.028 ↗
10. Influence of hydrogen-enhanced plasticity and decohesion mechanisms of hydrogen embrittlement on the fracture resistance of steel10.1016/j.engfailanal.2021.105312 ↗
11. B.N. Popov, J.-W. Lee, M.B. Djukic, Hydrogen permeation and hydrogen induced cracking, in: M. Kutz (Ed.), Handbook of environmental degradation of materials (Third Edition), William Andrew, Elsevier, (2018) 133-162.10.1016/B978-0-323-52472-8.00007-1 ↗
12. A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction10.1515/corrrev-2015-0083 ↗
13. A critical review of the influence of hydrogen on the mechanical properties of medium-strength steels10.1515/corrrev-2013-0023 ↗
14. Hydrogen embrittlement of low carbon structural steel at macro-, micro- and nano-levels10.1016/j.ijhydene.2019.11.070 ↗
15. Pipelines · 2004
16. Hydrogen embrittlement evaluation of micro alloyed steels by means of J-integral curve10.3390/ma12111843 ↗
17. Hydrogen embrittlement of ferritic steels: Deformation and failure mechanisms and challenges in the oil and gas industry10.1007/s11837-014-1054-4 ↗
18. Effects of hydrogen gas on steel vessels and pipelines
19. https://industry.arcelormittal.com/news/07-2021/first-hydrogen-certified-pipeline#.
20. Hydrogen embrittlement effect on the structural integrity of API 5L X52 steel pipeline10.1016/j.ijhydene.2018.08.149 ↗
21. A.B. Hagen, A. Alvaro, Hydrogen Influence on Mechanical Properties in Pipeline Steel-state of the art. SINTEF Rapport, SINTEF Industry Materials Integrity and Welding, 2020-14-02, Norway, 2020. https://www.sintef.no/en/publications/publication/1849922/.
22. ASME B31. 12 Hydrogen piping and pipeline code design rules and their interaction with pipeline materials concerns, issues and research
23. Qualification of high-strength linepipes for hydrogen transportation based on ASME B31. 12 Code
24. I. Uehara, Hydrogen and natural gas mixture, in: Energy Carriers And Conversion Systems With Emphasis On Hydrogen - Volume 1, T. Ohta (Ed.), Encyclopedia of Life Support Systems (EOLSS), UNESCO, 2008, pp. 283-290. https://www.eolss.net/ebooklib/bookinfo/energy-carriers-conversion-systems-with-emphasis-hydrogen.aspx.
25. M.W. Melaina, O. Antonia, M. Penev, Blending hydrogen into natural gas pipeline networks: a review of key issues. Technical Report NREL/TP-5600-51995, National Renewable Energy Laboratory, Denver, Colorado, USA, 2013. https://www.nrel.gov/docs/fy13osti/51995.pdf.10.2172/1219920 ↗
26. Analysis of hydrogen gas injection at various compositions in an existing natural gas pipeline
27. Hydrogen embrittlement of steel pipelines during transients10.1016/j.prostr.2018.12.035 ↗
28. A computational modelling of natural gas flow in looped network: effect of upstream hydrogen injection on the structural integrity of gas pipelines10.1016/j.jngse.2019.01.021 ↗
29. A. Chandra, R. Thodla, T.J. Prewitt, W. Matthews, S. Sosa, Fatigue Crack Growth Study of X70 Line Pipe Steel in Hydrogen Containing Natural Gas Blends, in: Proceedings of the ASME 2021 Pressure Vessels & Piping Conference PVP2021, July 12-16, 2021, ASME, USA.10.1115/PVP2021-61821 ↗
30. Thermodynamics of spontaneous dissociation and dissociative adsorption of hydrogen molecules and hydrogen atom adsorption and absorption on steel under pipelining conditions10.1016/j.ijhydene.2021.07.217 ↗
31. The synergistic effects of hydrogen embrittlement and transient gas flow conditions on integrity assessment of a precracked steel pipeline10.1016/j.ijhydene.2020.04.262 ↗
32. The effect of hydrogen on the master failure curve of APL 5L gas pipe steels10.1016/j.proeng.2011.04.155 ↗
33. System-level prognosis and health monitoring modeling framework and software implementation for gas pipeline system integrity management10.1016/j.jngse.2020.103671 ↗
34. C.W. San Marchi, Research Priority Workshop on Hydrogen Safety (No. SAND2018-9616PE), Sandia National Lab. (SNL-CA), Livermore, CA, USA, 2018. https://www.osti.gov/servlets/purl/1583076.
35. Effects of hydrogen addition on design, maintenance and surveillance of gas networks10.3390/pr9071219 ↗
36. Hydrogen embrittlement of industrial components: prediction, prevention, and models10.5006/1958 ↗
37. Efficiency of green inhibitors against hydrogen embrittlement on mechanical properties of pipe steel API 5L X52 in hydrochloric acid medium10.1007/s40735-018-0153-0 ↗
38. Options of natural gas pipeline reassignment for hydrogen: cost assessment for a Germany case study10.1016/j.ijhydene.2020.02.121 ↗
39. R. Komoda, M. Kubota, S. Yoshida, A. Staykov, P. Ginet, F. Barbier, J. Furtado, Inhibition of hydrogen embrittlement of Cr-Mo steel by the addition of impurities to hydrogen environment and the effect of material strength, in: Proceeding of the 28th International Ocean and Polar Engineering Conference, Sapporo, Japan, June 2018, OnePetro, 2018, Paper Number: ISOPE-I-18-504. https://onepetro.org/ISOPEIOPEC/proceedings-abstract/ISOPE18/All-ISOPE18/ISOPE-I-18-504/20777.
40. Al-Ti-W alloys deposited by magnetron sputtering: effective barrier to prevent steel hydrogen embrittlement10.1016/j.apsusc.2021.150786 ↗
41. Prevention of hydrogen embrittlement in steels10.2355/isijinternational.ISIJINT-2015-430 ↗
42. J.H. Holbrook, H.J. Cialone, E.W. Collings, E.J. Drauglis, M.E. Mayfield, Control of hydrogen embrittlement of metals by chemical inhibitors and coatings, in: Gaseous hydrogen embrittlement of materials in energy technologies Volume 2: Mechanisms, modelling and future developments: Woodhead Publishing Limited, 2012, pp. 129-153. Doi: 10.1533/9780857095374.1.129.10.1533/9780857095374.1.129 ↗
43. S. Grainger, J. Blunt, Chapter 5: Electrodeposited coatings. In: Engineering Coatings, 2nd Edition - Design and applications. Woodhead Publishing, 1998, pp. 167-193. https://www.elsevier.com/books/engineering-coatings/grainger/978-1-85573-369-5.
44. S. Grainger, J. Blunt, Chapter 6: Physical and chemical vapor deposition techniques, in: Engineering Coatings, 2nd Edition - Design and applications. Woodhead Publishing, 1998, pp. 194-225. https://www.elsevier.com/books/engineering-coatings/grainger/978-1-85573-369-5.
45. Hydrogen embrittlement in ferritic steels10.1063/5.0012851 ↗
46. Current challenges and opportunities toward understanding hydrogen embrittlement mechanisms in advanced high-strength steels: a review10.1007/s40195-021-01233-1 ↗
47. Review of hydrogen embrittlement in metals: hydrogen diffusion, hydrogen characterization, hydrogen embrittlement mechanism and prevention10.1007/s40195-020-01039-7 ↗
48. The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: localized plasticity and decohesion10.1016/j.engfracmech.2019.106528 ↗
49. Hydrogen damage of steels: A case study and hydrogen embrittlement model10.1016/j.engfailanal.2015.05.017 ↗
50. Hydrogen effect on fatigue and fracture of pipe steels
51. High cycle fatigue behaviors of API X65 pipeline steel welded joints in air and H2S solution environment10.1016/j.ijhydene.2020.12.140 ↗
52. Investigating the influence mechanism of hydrogen partial pressure on fracture toughness and fatigue life by in-situ hydrogen permeation10.1016/j.ijhydene.2021.03.183 ↗
53. Hydrogen-assisted fracture resistance of pipeline welds in gaseous hydrogen10.1016/j.ijhydene.2020.11.239 ↗
54. A review of fatigue crack growth for pipeline steels exposed to hydrogen10.6028/jres.115.030 ↗
55. Fatigue crack growth rates in high pressure hydrogen gas for multiple X100 pipeline welds accounting for crack location and residual stress10.1016/j.engfracmech.2019.106846 ↗
56. Z. Che, Fatigue crack growth in hydrogen pipeline steels. (2018). Ph.D. thesis, University of Illinois at Urbana-Champaign, USA, 2018. https://www.ideals.illinois.edu/bitstream/handle/2142/101584/CHE-THESIS-2018.pdf?sequence=1&isAllowed=y.
57. Fatigue crack growth of two pipeline steels in a pressurized hydrogen environment10.1016/j.corsci.2013.10.014 ↗
58. Hydrogen-enhanced fatigue crack growth in steels and its frequency dependence10.1098/rsta.2016.0412 ↗
59. Effects of gaseous hydrogen on fatigue crack growth in pipeline steel10.1007/BF02656719 ↗
60. Fracture properties and fatigue life assessment of API X70 pipeline steel under the effect of an environment containing hydrogen10.1007/s12206-021-0310-0 ↗
61. Effects of hydrogen addition on design, maintenance and surveillance of gas networks10.3390/pr9071219 ↗
62. Influence of load interaction and hydrogen on fatigue crack growth behavior in steel pipelines under mean load pressure fluctuations10.1111/ffe.13414 ↗
63. Effect of Environmental Composition on Fatigue Crack Growth and Hydrogen Permeation in Carbon Pipeline Steel
64. J.A. Ronevich, Fatigue Performance of High-Strength Pipeline Steels and Their Welds in Hydrogen Gas Service (report No. SAND2018-4031PE). Sandia National Lab (SNL-NM), Albuquerque, NM, USA, 2018.
65. Y.H. Zhang, The Effect of Hydrogen Gas on Fatigue Performance of Steels. (2010). The 29th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2010), Shanghai, China, 6-11 June 2010. https://www.twi-global.com/technical-knowledge/published-papers/review-of-the-effect-of-hydrogen-gas-on-fatigue-performance-of-steels-june-2010.10.1115/OMAE2010-20622 ↗
66. Fatigue crack propagation in hydrogen gas in low alloyed steel10.4028/www.scientific.net/KEM.627.149 ↗
67. B. Chen, Fatigue Study of Pipeline Steels. MS.c. thesis, University of Tennessee, USA, 2013. https://trace.tennessee.edu/utk_gradthes/2400/.
68. DVGW Project SyWeSt H2: Investigation of Steel Materials for Gas Pipelines and Plants for Assessment of their Suitability with. https://www.dvgw.de/medien/dvgw/forschung/berichte/g202006-sywesth2-steel-dvgw.pdf Hydrogen”.
69. ASME Sec. VIII, Division 3 Code, 2004 Edition. (2004). Alternative Rules for Construction of High Pressure Vessels, ASME, New York, USA.
70. API, API 579-1/ASME FFS-1 2007 Fitness-For-Service. (2007). American Petroleum Institute, Washington, USA.
71. An integrated transient model for simulating the operation of natural gas transport systems10.1016/j.jngse.2015.11.036 ↗
72. T. Van der Hoeven, Math in Gas and the art of linearization, Ph.D. thesis, Rijksuniversiteit te Groningen, Energy Delta Institute, Norway, 2014. http://www.ii.uib.no/forskningsgrupper/opt/forskning/PhD_Hoeven.pdf.
73. The linearization method for transient gas flows in pipeline systems revisited: Capabilities and limitations of the modelling approach10.1016/j.jngse.2022.104494 ↗
74. K.A. Pambour, Modelling, simulation and analysis of security of supply scenarios in integrated gas and electricity transmission networks, Ph.D. thesis, University of Groningen, Netherlands, 2018. https://research.rug.nl/en/publications/modelling-simulation-and-analysis-of-security-of-supply-scenarios.
75. SAInt - a novel quasi-dynamic model for assessing security of supply in coupled gas and electricity transmission networks10.1016/j.apenergy.2017.05.142 ↗
76. In-service degradation of structural steels (A Survey)10.1007/s11003-021-00547-w ↗
77. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
78. Mechanisms of fatigue crack growth in low alloy steel10.1016/0001-6160(73)90073-4 ↗
79. M.J. Pais, F. Viana, N.H. Kim, High-Order Integration of Fatigue Crack Growth Using Surrogate Model. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19th AIAA/ASME/AHS Adaptive Structures Conference, 2011, Doi: 10.2514/6.2011-2110.10.2514/6.2011-2110 ↗
80. Crack-extension force for a part-through crack in a plate10.1115/1.3640649 ↗
81. The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement10.1016/j.ijhydene.2014.12.040 ↗
82. Pipe networks transporting hydrogen pure or blended with natural gas, design and maintenance10.1016/j.engfailanal.2019.104164 ↗
83. Inspections, statistical and reliability assessment study of corroded pipeline10.1016/j.engfailanal.2019.02.012 ↗
84. Probabilistic analysis of corroded pipeline under localized corrosion defects based on the intelligent inspection tool10.1016/j.engfailanal.2020.104683 ↗
85. A probabilistic approach to estimate the remaining life and reliability of corroded pipelines10.1016/j.jngse.2021.104387 ↗
86. BS7910, Guide to Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures (2005). British Standards Institution, London, UK.
87. Corrosion defect analysis using domain failure assessment diagram10.1016/j.ijpvp.2018.06.005 ↗
88. A.J. Osiadacz, Simulation and analysis of gas networks. E. & F.N Spon, London, 1987. https://www.osti.gov/biblio/5141539.
89. Transient analysis of isothermal gas flow in pipeline network10.1016/S1385-8947(99)00122-9 ↗
90. The accuracy and efficiency of a MATLAB Simulink library for transient flow simulation of gas pipelines and networks10.1016/j.petrol.2009.11.018 ↗
91. Numerical modelling of hydrogen-natural gas mixtures flows in looped networks10.1016/j.petrol.2017.09.063 ↗
92. ASME B31 Committee. ASME B31G-2009: manual for determining the remaining strength of corroded pipelines. American Society of Mechanical Engineers, 2009.
93. J.F. Kiefner, P.H. Vieth, A modified criterion for evaluating the remaining strength of corroded pipe (No. PR-3-805). Battelle Columbus Div., OH, USA, 1989. https://www.osti.gov/biblio/7181509.10.55274/R0011347 ↗
94. Reliability estimation of pressurized API 5L X70 pipeline steel under longitudinal elliptical corrosion defect10.1007/s00170-016-9580-6 ↗
95. Correlation between defect depth and defect length through a reliability index when evaluating of the remaining life of steel pipeline under corrosion and crack defects10.1016/j.engfailanal.2017.04.025 ↗
96. Assessment of corroded API 5L X52 pipe elbow using a modified failure assessment diagram10.1016/j.ijpvp.2020.104291 ↗
97. Reliability analysis of corroded pipelines: Novel adaptive conjugate first order reliability method10.1016/j.jlp.2019.103986 ↗
98. Modified response surface method basis harmony search to predict the burst pressure of corroded pipelines10.1016/j.engfailanal.2018.02.016 ↗
99. M. El Amine Ben Seghier, B. Keshtegar, J.A.F.O. Correia, G. Lesiuk, A.M.P. De Jesus,. Reliability analysis based on hybrid algorithm of M5 model tree and Monte Carlo simulation for corroded pipelines: Case of study X60 Steel grade pipes, Eng. Failure Anal. 97 (2019) 793-803. Doi: 10.1016/j.engfailanal.2019.01.061.10.1016/j.engfailanal.2019.01.061 ↗
100. W.R. Hoover, S.L. Robinson, R.E. Stoltz, J.R. Spingarn, Hydrogen compatibility of structural materials for energy storage and transmission. (SAND-81-8006), Sandia National Labs. Livermore, CA, USA, 1981. https://www.osti.gov/biblio/6392803-hydrogen-compatibility-structural-materials-energy-storage-transmission-final-report.