Erosion behavior and influence of solid particles in hydraulic spool valve without notches
Source abstract
Abstract
Abstract Hydraulic spool valve without notches is used as a kind of important amplification component in hydraulic servo valve. Its static and dynamic properties have a significant impact on the performance of servo valve and hydraulic system. Under solid particles erosion in oil, the metering edges of spool valve were usually eroded and worn. This process was irreversible and induced serious control performance degradation of orifice and valve. In this paper, the erosive behavior and influence of solid particles in hydraulic spool valve without notches were investigated. By the surface microtopography measurement of the spool, erosion corners failure were present. The CFD simulation of solid-liquid two-phase flow was carried out by discrete phase model (DPM) to analyze the erosion failure. The migration route of the severe erosion region of hydraulic spool valve without notches was obtained and the mechanism of local erosion was revealed. An interesting phenomenon of erosion inflection point and face-back flow was found. The exact calculation method of the orifice area under erosion was discussed and put forward. This paper provides a reference for further study on the erosion damage and erosion resistance of hydraulic spool valve without notches.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Nuclear Materials and Properties · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Research on geometric accuracy of servo valve orifice
2. Bent H. Nystad, Giulio Gola, John E. Hulsund et al., Technical condition assessment and remaining useful life estimation of choke valves subject to erosion, Annual Conference of the Prognostics and Health Management Society, Oregon, Portlang, 2010.10.36001/phmconf.2010.v2i1.1726 ↗
3. Three-dimensional model simulation of the effect of the spool valve flange fillet on the flow characteristics
4. Valve edge geometry error on the performance of the slide valve simulation
5. Failure prevention of hydraulic system based on oil contamination
6. Research progress on erosion wear of solid particles
7. The role of particle properties in the erosion of brittle materials10.1016/0043-1648(95)06694-2 ↗
8. Erosion and corrosion of mining hydraulic equipment
9. Degradation assessment and life prediction of electro-hydraulic servo valve under erosion wear10.1016/j.engfailanal.2013.10.017 ↗
10. D.L. Qian, Panyu 35-2 subsea gas pipeline erosion law, Southwest Petroleum University, 2015.
11. Erosion wear characteristics analysis and structure discussion of hydraulic valves10.1177/2057150X16633580 ↗
12. Numerical simulation of pre-level erosion wear of jet tube servo valve
13. Erosion wear characteristics of jet pipe servo valve
14. A mechanistic model for stochastic rebound of solid particles with application to erosion predictions10.1016/j.wear.2017.02.015 ↗
15. Research on erosion wear of high-pressure pipes during hydraulic fracturing slurry flow10.1016/j.jlp.2016.07.008 ↗
16. CFD simulation of multiphase flows and erosion preditions under annular flow and low liquid loading conditions10.1016/j.wear.2017.01.111 ↗
17. N. Barton, M. Lewis, P. Emmerson, CFD erosion prediction in gas-liquid-sand flow, Proceedings of SPE International Oilfield Corrosion Conference and Exhibition, Aberdeen, Scotland, UK, 2016.10.2118/179926-MS ↗
18. Experimental and computational modeling of solid particle erosion in a pipe annular cavity10.1016/j.wear.2013.02.018 ↗
19. Numerrical study of solid particle erosion in hydraulic spool valve
20. R. Yang, Hydraulic spool valve metering notch characterization using CFD, Proceedings of the ASME International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 11–17, 2003.10.1115/IMECE2003-42420 ↗
21. Flow forces analysis of an open center hydraulic directional control valve sliding spool10.1016/j.enconman.2005.03.010 ↗
22. J.K. Edwards, B.S. Mclaury, S.A. Shirazi, Evaluation of alternative pipe bend fittings in erosion service, Proceedings of the 2000 ASME Fluid Engineering Division Summer Meeting, American Society of Mechanical Engineers, New York, 2000, pp. 956–966.
23. J.K. Edwards, Development, Validation and application of a three-dimensional, CFD-based erosion prediction procedure[dissertation], The University of Tulsa, Tulsa, 2000.
24. Y.L. Zhang, Application and improvement of computational fluid dynamics (CFD) in solid particle erosion modeling [dissertation], The University of Tulsa, Tulsa, 2006.
25. Some observations on the erosion of ductile metals10.1016/0043-1648(72)90444-9 ↗
26. Prediction of impact erosion in valve geometries10.1016/j.wear.2003.06.004 ↗
27. B.S. McLaury, S.A. Shirazi, J.R. Shadley, E.F. Rybicki, Modeling erosion in chokes, ASME, Fluids Engineering Division(Publication) FED, vol. 236, no. 1, 1996, pp. 773–781.10.5006/C1995-95120 ↗