An investigation into the failure mechanism of severe abrasion of high-speed train brake discs on snowy days
Source abstract
Abstract
Abstract The brake discs of high-speed trains undergo severe abrasion on snowy days, which damages the safety of railway transportation. In the present paper, the mechanism leadinig to severe abrasion failure of brake discs in snowy days was determined. The microstructure and morphology of the scrap, damaged brake discs and pads were examined. The chemical composition of scrap surfaces was investigated. The ice wrapping the pads was collected and the inclusion in the ice was inspected. Moreover, camera surveillance was used to record the braking process on snowy days. Based on the results, a model for illustrating the severe abrasion process of brake discs was established. The hard particles in the ice wrapping brake pads scratched the brake disc and generated some swarf in the beginning. The swarf stacked and worked as abrasive material to gouge the brake discs, causing the severe abrasion failure finally. To demonstrate the model, reduced scale dynamo tests were carried out to simulate the severe abrasion according to speculation of the model, and similar results consistent with the actual situation were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Mechanical stress and fatigue analysis · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Characterization and experiments on the friction catastrophe behaviors of brake material during emergency braking10.1016/j.engfailanal.2015.05.007 ↗
2. Analyzing the mechanisms of thermal fatigue and phase change of steel used in brake discs10.1016/j.engfailanal.2015.07.002 ↗
3. Analyzing the mechanisms of fatigue crack initiation and propagation in CRH EMU brake discs10.1016/j.engfailanal.2013.07.004 ↗
4. Damage mechanisms and thermomechanical loading of brake discs10.1016/S1566-1369(02)80073-5 ↗
5. A thermomechanical model for the analysis of disc brakes fracture mechanims10.1080/01495730390207622 ↗
6. Fatigue behaviour of 28CrMoV5-08 steel under thermomechanical loading10.1016/S0142-1123(97)00130-8 ↗
7. Thermal cracking in disc brakes10.1016/S1350-6307(00)00037-6 ↗
8. Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking10.1016/j.wear.2010.11.007 ↗
9. Wear of truck brake lining materials using three different test methods10.1016/j.wear.2004.12.022 ↗
10. A study of the wear mechanisms of disk and shoe brake pads10.1016/j.engfailanal.2015.01.004 ↗
11. Wear mechanism in automotive brake materials, wear debris and its potential environmental impact10.1016/j.wear.2009.01.034 ↗
12. Experimental studies of friction-induced brake squeal: influence of environmental sand particles in the interface brake pad-disc10.1016/j.triboint.2017.02.032 ↗
13. Squealing characteristics of worn brake pads due to silica sand embedment into their friction layers10.1016/j.wear.2016.04.006 ↗
14. U · 2010 · 2010
15. EBSD study of early-damaging phenomena in wheel–rail model test10.1016/j.wear.2015.08.004 ↗
16. Plastic deformation and sliding friction of metals10.1016/0043-1648(79)90087-5 ↗
17. Pascoe · 1978 · 273
18. Characterization of phase fractions and misorientations on tempered Bainitic/martensitic Ni-Cr-Mo low alloy RPV steel with various Ni content10.1007/s12540-013-1009-2 ↗
19. The effects of Martensite content on the mechanical properties of quenched and tempered 0.2%C-Ni-Cr-Mo steels10.1007/s11665-009-9503-x ↗
20. Low cycle fatigue behavior of Cr–Mo–V low alloy steel used for railway brake discs10.1016/j.matdes.2013.10.093 ↗
21. Friction material design for brake pads using database10.1080/10402000108982437 ↗
22. Brake friction materials
23. Solomon · 2007 · vol. 2166
24. Hardness
25. Taylor · 1949 · 28 · 718