journal article·2015-05

Failure analysis of stress corrosion cracking in heat exchanger tubes during start-up operation

Shugen Xu, Chong Wang, Weiqiang Wang

Publisher page

Abstract

Abstract The cracking failure of a new heat exchanger during first start-up operation has been analyzed. Through the investigation of the operating history of the equipment, analysis of the chemical compositions of tube material and corrosion products, metallographic test of specimens with cracks, the cracking mode can be described as the Stress Corrosion Cracking (SCC) of austenitic stainless steel. This kind of cracking was induced by the chloride in high temperature steam and tensile stress. The residual tensile stress due to seal expansion has been proved by numerical calculation. The pre-heating steam which was polluted by the catalyst with chloride is the main reason for the tube cracking in this case.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Cracking of 2.25Cr–1.0Mo steel tube/stationary tube-sheet weldment of a heat-exchanger10.1016/j.engfailanal.2007.06.013 ↗
2. The effect of residual stresses arising from laser shock peening on fatigue crack growth10.1016/j.engfracmech.2010.03.033 ↗
3. Control of welding residual stress for ensuring integrity against fatigue and stress-corrosion cracking10.1016/j.nucengdes.2006.05.006 ↗
4. Effects of prior cold work and sensitization heat treatment on chloride stress corrosion cracking in type 304 stainless steels10.1016/S0010-938X(00)00165-7 ↗
5. Failure analysis of carbon steel pipes used for underground condensate pipeline in the power station10.1016/j.engfailanal.2013.08.005 ↗
6. Stress corrosion failure of an X52 grade gas pipeline10.1016/j.engfailanal.2014.08.011 ↗
7. Root cause analysis of stress corrosion at tube-to-tubesheet joints of a waste heat boiler10.1016/j.engfailanal.2014.07.013 ↗
8. The standard of People’s Republic of China. GB/T13296-2007 Boiler, heat exchanger with stainless steel seamless pipe [in Chinese].
9. The standard of People’s Republic of China. GB/T 222-2006 Permissible tolerances for chemical composition of steel products [in Chinese].
10. Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger10.1016/j.ijpvp.2012.10.004 ↗
11. Using FEM to determine the thermo-mechanical stress in tube to tube-sheet joint for the SCC failure analysis10.1016/j.engfailanal.2013.07.011 ↗