journal article·2021-11

Corrosion failure analysis of low alloy steel and carbon steel rebar in tropical marine atmospheric environment: Outdoor exposure and indoor test

Baojun Dong, Wei Liu, Tianyi Zhang, Longjun Chen, Yueming Fan, Yonggang Zhao, Weijian Yang, Wongpat Banthukul

Publisher page

Abstract

Abstract Carbon steel rebar seriously corrodes in severe tropical marine atmospheric environment, threatening the safety of building structures. Hence, it is of great significance to design and manufacture low-alloy steel rebar which can be used in tropical marine atmospheric environment. In the paper, both of the self-designed low alloy (LA-1) steel rebar and carbon steel (HRB400E) rebar has been exposed in Sriracha for two years. The corrosion rate of LA-1 steel rebar is only half of that of carbon steel rebar after two years. However, it is difficult to study the root cause of low alloy steel rebars’ enhanced corrosion resistance by alloy elements due to the presence of a large amount of CaCO3 in the rust layer. Therefore, the mechanism of improving the protective effect of alloy elements on rust layer is further studied by dry/wet cycling corrosion tests to simulate a tropical marine atmosphere environment. The formation of dense product film on LA-1 steel surface is mainly because of the addition of Cr and Mo elements, leading to the corrosion rate of LA-1 steel rebar far less than that of HRB400E steel rebar. The protective film formed by molybdate in alkaline environment hinders the further corrosion of steel rebars. Cr(OH)3 formed by hydrolysis of Cr in low alloy steel rebars inhibits the growth of FeOOH in rust, resulting in the generation of smaller size of FeOOH particles. The experiment proves that the newly designed LA-1 steel rebar can be well applied in tropical marine atmospheric environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Corrosion behaviour of low-carbon steel reinforcement in alkali-activated slag-steel slag and Portland cement-based mortars under simulated marine environment10.1016/j.corsci.2020.108874 ↗
2. Metallurgical analysis of transverse crack of rebars10.1016/j.engfailanal.2019.06.058 ↗
3. Fatigue failure analysis of a Ø14 B500C steel rebar: Metallurgical evaluation and numerical simulation10.1016/j.engfailanal.2019.03.016 ↗
4. Effect of DC stray current on electrochemical behavior of low-carbon steel and 10%Cr steel in saturated Ca(OH)2 solution10.1016/j.corsci.2020.108610 ↗
5. Electrochemical performance of reinforcing steel in alkali-activated slag extract in the presence of chlorides10.1016/j.corsci.2018.01.043 ↗
6. Enhanced passivation of alloy corrosion-resistant steel Cr10Mo1 under carbonation - Passive film formation, the kinetics and mechanism analysis10.1016/j.cemconcomp.2018.06.005 ↗
7. Chloride resistance of 9% Cr steel in a simulated pore solution10.5006/0930 ↗
8. Improved corrosion resistance of a new 6% Cr steel in simulated concrete pore solution contaminated by chlorides10.1016/j.corsci.2020.108851 ↗
9. Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution10.1016/j.apsusc.2016.08.074 ↗
10. Passive behaviour of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions with different pH10.1016/j.apsusc.2016.07.142 ↗
11. Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere10.1016/j.cemconcomp.2020.103728 ↗
12. Effect of Mo addition on corrosion of Zn coatings electrodeposited on steel10.1016/j.corsci.2018.02.039 ↗
13. Effect of Cu, Cr and Ni alloying elements on mechanical properties and atmospheric corrosion resistance of weathering steels in marine atmospheres of different aggressivities10.1002/maco.201709656 ↗
14. Evolution of rust layers on carbon steel and weathering steel in high humidity and heat marine atmospheric corrosion10.1016/j.jmst.2019.07.054 ↗
15. A study for corrosion behavior of a new-type weathering steel used in harsh marine environment10.1016/j.conbuildmat.2020.119760 ↗
16. Effect of Co and Ni on the corrosion behavior of low alloy steels in wet/dry environments10.1016/S0010-938X(00)00018-4 ↗
17. A study of the evolution of rust on Mo–Cu-bearing fire-resistant steel submitted to simulated atmospheric corrosion10.1016/j.corsci.2011.09.023 ↗
18. Influence of Sn and Mo on corrosion behavior of ferrite-pearlite steel in the simulated bottom plate environment of cargo oil tank10.1016/j.jmst.2018.11.012 ↗
19. Synergisic effect of Mn, Cu, P with Cr content on the corrosion behavior of weathering steel as a train under the simulated industrial atmosphere10.1016/j.jallcom.2020.155095 ↗
20. Insight into the product film formed on Ni-advanced weathering steel in a tropical marine atmosphere10.1016/j.apsusc.2017.12.018 ↗
21. Ni-advanced weathering steels in Maldives for two years: Corrosion results of tropical marine field test10.1016/j.conbuildmat.2020.118463 ↗
22. Synergy of Cu and Sb to enhance the resistance of 3%Ni weathering steel to marine atmospheric corrosion10.1016/j.corsci.2021.109353 ↗
23. Benefit of the rust layers formed on a new weathering steel containing 3% nickel under marine atmosphere in Maldives10.1016/j.corsci.2019.108416 ↗
24. Morcillo, Atmospheric corrosion of Ni-advanced weathering steels in marine atmospheres of moderate salinity10.1016/j.corsci.2013.06.053 ↗
25. Effect of carbonation on the electrochemical behavior of corrosion resistance low alloy steel rebars in cement extract solution10.1016/j.conbuildmat.2016.10.003 ↗
26. Corrosion behavior of nickel-containing weathering steel in simulated marine atmospheric environment10.1002/maco.201307447 ↗
27. Cr-modified low alloy steel reinforcement embedded in mortar for two years: corrosion result of marine field test10.1016/j.cemconcomp.2018.12.019 ↗
28. Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion10.1016/j.engfailanal.2015.03.019 ↗
29. Effect of Cr content on the passivation behavior of Cr alloy steel in a CO2 aqueous environment containing silty sand10.1016/j.corsci.2020.108591 ↗
30. Study of the corrosion behavior of weathering steels in atmospheric environments10.1016/j.corsci.2012.09.020 ↗
31. The mechanism controlling corrosion of steel in carbonated cementitious materials in wetting and drying exposure10.1016/j.cemconcomp.2020.103717 ↗
32. Improving the resistance of high-strength steel to SCC in a SO2-polluted marine atmosphere through Nb and Sb microalloying10.1016/j.corsci.2020.108693 ↗
33. Effect of chloride ion on corrosion resistance of Ni-advanced weathering steel in simulated tropical marine atmosphere10.1016/j.conbuildmat.2020.120937 ↗
34. Insight into the corrosion behaviour and degradation mechanism of pure zinc in simulated body fluid10.1016/j.corsci.2020.109071 ↗
35. Effect of tin addition on corrosion behavior of a low-alloy steel in simulated costal-industrial atmosphere10.1016/j.jmst.2019.01.008 ↗
36. Electrochemical and XPS analytical investigation of the accelerative effect of bicarbonate/carbonate ions on AISI 304 in alkaline environment10.1016/j.apsusc.2019.06.198 ↗
37. Comparison of the characteristics of corrosion scales covering 3Cr steel and X60 steel in CO2-H2S coexistence environment10.1016/j.jngse.2020.103371 ↗
38. Insight into atmospheric corrosion evolution of mild steel in a simulated coastal atmosphere10.1016/j.jmst.2020.11.021 ↗
39. Distinct beneficial effect of Sn on the corrosion resistance of Cr–Mo low alloy steel10.1016/j.jmst.2020.12.014 ↗
40. Effect of molybdate on the passivation of carbon steel in alkaline solutions under open-circuit conditions10.1149/2.0651610jes ↗
41. Beneficial and detrimental impacts of molybdate on corrosion resistance of steels in alkaline concrete pore solution with high chloride contamination10.1016/j.corsci.2021.109326 ↗
42. Beneficial and detrimental effects of molybdate as an inhibitor on reinforcing steels in saturated Ca(OH)2 solution: Spontaneous passivation
43. Enhanced corrosion resistance of reinforcing steels in simulated concrete pore solution with low molybdate to chloride ratios10.1016/j.cemconcomp.2020.103589 ↗
44. Inhibition of Q235 Carbon Steel by Calcium lignosulfonate and sodium molybdate in carbonated concrete pore solution10.3390/molecules24030518 ↗
45. Effect of small content of chromium on wet–dry acid corrosion behavior of low alloy steel10.1007/s40195-016-0513-z ↗
46. Nanostructure of protective rust layer on weathering steel examined using synchrotron radiation X-rays10.2320/matertrans.45.1920 ↗
47. Effects of Cr, Ni and Cu on the Corrosion Behavior of Low Carbon Microalloying Steel in a Cl− Containing Environment10.1016/j.jmst.2012.12.013 ↗
48. Control of Fe(O, OH)6 nano-network structures of rust for high atmospheric-corrosion resistance10.1016/j.corsci.2005.04.005 ↗