Time-varying mesh stiffness calculation of spur gears with spalling defect
Source abstract
Abstract
Abstract Considering the effects of extended tooth contact (ETC), revised fillet-foundation stiffness under double-tooth engagement region, nonlinear contact stiffness and tooth spalling defect, an analytical model for time-varying mesh stiffness (TVMS) calculation of spur gears is established. In addition, the analytical model is also verified by comparing the TVMS under different spalling widths, lengths and locations with that obtained from finite element method. The results show that gear mesh stiffness decreases sharply with the increase of spalling width, especially during the single-tooth engagement; the spalling length only has an effect on the beginning and ending of gear mesh stiffness reduction; the spalling location can affect the range of gear mesh stiffness reduction, and the range will reduce when the spalling location is close to the addendum. This study can provide a theoretical basis for spalling defect diagnosis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Review on dynamics of cracked gear systems10.1016/j.engfailanal.2015.06.004 ↗
2. Hertzian damping, tooth friction and bending elasticity in gear impact dynamics10.1115/1.3267437 ↗
3. Tian · 2004
4. Wu · 2007
5. Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness10.1016/j.euromechsol.2008.07.007 ↗
6. An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack10.1016/j.engfailanal.2014.04.005 ↗
7. Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set10.1016/j.mechmachtheory.2014.02.001 ↗
8. Fault feature analysis of a cracked gear coupled rotor system10.1155/2014/832192 ↗
9. Time-varying mesh stiffness calculation of cracked spur gears10.1016/j.engfailanal.2014.05.018 ↗
10. Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack10.1016/j.mechmachtheory.2012.10.012 ↗
11. An improved analytical method for mesh stiffness calculation of spur gears with tip relief10.1016/j.mechmachtheory.2015.11.017 ↗
12. Improved time-varying mesh stiffness model of cracked spur gears10.1016/j.engfailanal.2015.06.007 ↗
13. Analytical modeling of spur gear corner contact effects10.1016/j.mechmachtheory.2015.10.001 ↗
14. Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis10.1016/j.engfailanal.2013.08.008 ↗
15. Three-dimensional analyses by finite element method of a spur gear: effect of cracks in the teeth foot on the mesh stiffness10.1007/s11668-007-9078-5 ↗
16. Wang · 2003
17. The dynamic modeling of a spur gear in mesh including friction and a crack10.1006/mssp.2001.1414 ↗
18. Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations10.1016/j.ymssp.2005.02.009 ↗
19. Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission10.1016/j.euromechsol.2007.11.005 ↗
20. Research on dynamics and fault mechanism of spur gear pair with spalling defect10.1016/j.jsv.2011.12.010 ↗
21. Research on the dynamic mechanism of the gear system with local crack and spalling failure10.1016/j.engfailanal.2012.05.022 ↗
22. Time-varying stiffness model and dynamic response characteristics of gears with tooth surface spalling and edge contact
23. Dynamic characteristics of helical gears under sliding friction with spalling defect10.1016/j.engfailanal.2014.01.008 ↗
24. Palmgren · 1959
25. Compliance and stress sensitivity of spur gear teeth10.1115/1.3254939 ↗
26. Contribution of gear body to tooth deflections-a new bidimensional analytical formula10.1115/1.1758252 ↗